BAFANG C965 LCD Display User Manual

1. Uvod

This user manual provides detailed instructions for the installation, operation, and maintenance of your BAFANG C965 LCD Display. This display is designed for use with Bafang Mid Drive motors that utilize the UART communication protocol. Please read this manual thoroughly before using the product to ensure safe and correct operation.

The BAFANG C965 LCD Display offers essential information for your electric bicycle, including speed, battery level, assistance level (PAS), and trip data, enhancing your riding experience.

2. Varnostne informacije

• Always ensure the display is securely mounted and all cables are properly connected before riding.
• Do not attempt to open or modify the display unit. This may void the warranty and cause damage.
• Keep the display screen clean and free from obstructions to ensure clear visibility of information.
• Izogibajte se izpostavljanju zaslona ekstremnim temperaturam ali neposredni sončni svetlobi dlje časa.
• In case of malfunction, refer to the troubleshooting section or contact Bafang support.

3. Vsebina paketa

Preverite, ali so v paketu vsi elementi:

• BAFANG C965 LCD Display Unit
• Nosilec za pritrditev krmila
• Control Button Unit
• Uporabniški priročnik (ta dokument)

4. Nastavitev in namestitev

Follow these steps to install your BAFANG C965 LCD Display:

1. Namestitev zaslona: Attach the handlebar mounting bracket to your bicycle's handlebar. The bracket is compatible with handlebar diameters of 22.2mm, 25.4mm, and 31.8mm. Secure the C965 display unit into the bracket.
2. Priključni kabli: Connect the 5-pin female connector from the display unit to the corresponding male connector on your Bafang Mid Drive motor system. Ensure the connection is firm and secure.
3. Mounting Control Buttons: Position the external control button unit on your handlebar within easy reach. Connect its cable to the display unit.

Figure 1: Bafang C965 LCD display unit with cables and mounting bracket.

Figure 2: Bafang C965 LCD display mounted on an e-bike handlebar.

5. Navodila za uporabo

Once installed, operate your BAFANG C965 LCD Display as follows:

• Vklop/izklop: Press and hold the power button on the external control unit to turn the display on or off.
• Adjusting PAS Level: Use the '+' and '-' buttons on the control unit to increase or decrease the Pedal Assist System (PAS) level.
• Prikaz informacij: The display cycles through various information screens. Use the 'M' (Mode) button to switch between different data views such as trip distance, total distance, average speed, max speed, and time.
• Nadzor žarometov: If your e-bike system supports it, a dedicated button or a long press of a specific button (refer to your motor's manual) may control the headlights.

Figure 3: Bafang C965 LCD display showing active riding data.

6. Display Functions and Indicators

The C965 display provides various indicators and data points:

• Prikaz hitrosti: Shows current speed, average speed (AVG), and maximum speed (MAX).
• Indikator baterije: Prikazuje preostalo raven napolnjenosti baterije.
• Stopnja PAS: Indicates the current pedal assist level (0-9 or 0-3, depending on configuration).
• Kazalnik prevoženih kilometrov: Shows trip distance and total odometer reading.
• Indikator moči: Displays real-time motor power output.
• Čas: Current time or trip duration.
• Indikator zavore: Zasveti, ko zavirate.
• Indikator napake: Displays error codes if a system fault occurs.
• Vklop žarometov: Indicates when the e-bike's headlights are active.

Figure 4: Bafang C965 LCD display icons and basic specifications.

7. Vzdrževanje

To ensure the longevity and optimal performance of your C965 display:

• Čiščenje: Zaslon in ohišje obrišite z mehko krpoamp krpo. Ne uporabljajte abrazivnih čistil ali topil.
• Vodoodpornost: The display has an IP65 waterproof rating, meaning it is protected against dust and low-pressure water jets. Avoid submerging the unit in water.
• Temperatura: Operate the display within its specified temperature range of -20°C to 60°C.
• Pregled kabla: Občasno preverite vse kable in priključke glede znakov obrabe ali poškodb.

8. Odpravljanje težav

If you encounter issues with your BAFANG C965 LCD Display, consider the following:

• Zaslon se ne vklopi:
  • Prepričajte se, da je baterija električnega kolesa napolnjena in pravilno priključena.
  • Check all cable connections between the display, control unit, and motor for looseness or damage.
  • Preverite, ali je gumb za vklop pravilno pritisnjen.
• Napačne odčitke hitrosti/razdalje:
  • Preverite, ali sta senzor hitrosti in magnet na kolesu pravilno poravnana in čista.
  • Ensure the wheel circumference setting in the display's advanced settings (if accessible) is correct.
• Prikazane kode napak:
  • Refer to your Bafang motor's specific error code list for detailed explanations and solutions. Common issues include motor, controller, or sensor faults.
  • Often, turning the system off and on again can clear temporary errors.
• Gumbi se ne odzivajo:
  • Check the connection of the external control button unit to the display.
  • Ensure buttons are not physically stuck.

If problems persist after attempting these steps, contact Bafang customer support or your authorized dealer for assistance.

9. Specifikacije

10. Garancija in podpora

BAFANG products are typically covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for any warranty claims.

For technical support, warranty inquiries, or spare parts, please contact your original retailer or visit the official BAFANG webspletno mesto za kontaktne podatke za pomoč strankam.