Nekteck NK-JS19800 Portable Car Jump Starter User Manual

1. Pomembne varnostne informacije

Please read this user manual carefully before operating the Nekteck NK-JS19800 Portable Car Jump Starter. Failure to follow these instructions may result in electric shock, fire, or serious injury. Keep this manual for future reference.

• Vedno priključite zagonski kabelampna priključke akumulatorja vozila v pravilni polarnosti (rdeča na pozitivno, črna na negativno).
• Ne povzročajte kratkega stika na zaganjalniku.amps by connecting the red and black clamps skupaj.
• Izdelka ne izpostavljajte dežju ali vodi.
• Ne uporabljajte zaganjalnika, če je poškodovan ali spremenjen.
• Hraniti izven dosega otrok.
• Pred uporabo se prepričajte, da je zaganjalnik popolnoma napolnjen.
• This device is UL 2743 (SGS Certified) for safety.

2. Vsebina paketa

Preverite, ali so v paketu prisotni vsi elementi:

• Nekteck NK-JS19800 Jump Starter (Battery Host) x1
• Inteligentni akumulator Clamps x1
• Charging Cable (USB-C) x1
• Charging Cable (Micro USB) x1
• QC 3.0 Charger Adapter x1
• Torbica za shranjevanje x1
• Uporabniški priročnik x1

Image: Contents of the Nekteck NK-JS19800 package, including the jump starter, intelligent clamps, various charging cables, a charger adapter, a storage case, and the user manual.

3. Izdelek je končanview in komponente

Familiarize yourself with the different parts and functions of your Nekteck NK-JS19800 Jump Starter:

Image: Diagram illustrating the various ports and indicators on the Nekteck NK-JS19800 Jump Starter.

• Indikatorji nivoja baterije: Displays the remaining charge of the jump starter.
• Gumb za vklop: Turns the device on/off and activates the LED light.
• Vtičnica za zagon: Connects to the intelligent battery clamps for jump starting.
• USB A (5V/2.4A) Output: Standardni USB vhod za polnjenje naprav.
• USB A QC3.0 (5V/2.4A, 9V/2A, 12V/1.5A) Output: Quick Charge 3.0 port for faster charging of compatible devices.
• USB C Input/Output (5V/3A): Used for charging the jump starter itself or charging compatible USB-C devices.
• DC 15V 10A Output Port: Provides 15V DC power for compatible devices.
• LED zasilna luč: Multi-mode flashlight for illumination and signaling.

4. Polnjenje zaganjalnika

Before first use, fully charge the jump starter. It takes approximately 5-6 hours for a full charge.

1. Connect the provided USB-C charging cable to the USB C Input/Output port on the jump starter.
2. Connect the other end of the USB-C cable to the QC 3.0 Charger Adapter.
3. Plug the charger adapter into a wall outlet.
4. The battery level indicators will light up, showing the charging progress. All four lights will be solid when fully charged.

It is recommended to recharge the jump starter every 3 months to maintain optimal battery health, even if not in use.

5. Navodila za uporabo: Zagon vozila s pomočjo kablov

The Nekteck NK-JS19800 can jump start vehicles with up to 10L gas or 7L diesel engines, including cars, motorcycles, ATVs, lawn mowers, and tractors.

1. Prepričajte se, da je zaganjalnik dovolj napolnjen (priporočeno vsaj 50 %).
2. Turn off your vehicle's ignition and all accessories (headlights, radio, etc.).
3. Priključite rdeči (+) clamp of the intelligent battery clamps to the positive (+) terminal of your vehicle's battery.
4. Povežite črni (-) klamp of the intelligent battery clamps to the negative (-) terminal of your vehicle's battery.
5. Priključite inteligentni akumulatorski vtičamps connector into the Jump Start Socket on the Nekteck jump starter. Ensure a secure connection.
6. The intelligent clamps will indicate if the connection is correct. If an error is detected (e.g., reverse polarity), do not proceed.
7. Start your vehicle's engine. If it doesn't start immediately, wait 30 seconds before trying again. Do not crank for more than 3 seconds per attempt.
8. Once the vehicle starts, immediately disconnect the intelligent battery clamps od zaganjalnika.
9. Nato odklopite črni (-) clamp iz akumulatorja vozila, ki mu sledi rdeča (+) lučka clamp.

Image: The Nekteck NK-JS19800 Jump Starter connected to a car battery using intelligent clamps, highlighting safety features like short-circuit and reverse polarity protection.

6. Navodila za uporabo: Funkcija prenosne baterije

The Nekteck NK-JS19800 can also serve as a power bank to charge your electronic devices.

• USB A izhod: Connect your device's USB charging cable to the USB A (5V/2.4A) port.
• USB A QC3.0 Output: For faster charging of compatible devices, use the USB A QC3.0 port (5V/2.4A, 9V/2A, 12V/1.5A).
• USB C izhod: Connect your USB-C compatible device to the USB C Input/Output port (5V/3A).
• Izhod DC 15V 10A: Use this port with a compatible adapter (not included) to power 15V DC devices.

Image: The Nekteck NK-JS19800 Jump Starter being used as a power bank to charge mobile devices via its USB-A, QC-USB A, and Type-C ports.

7. Načini delovanja LED svetilke

The built-in LED light provides illumination and emergency signaling options:

1. Pritisnite in 3 sekunde držite gumb za vklop, da vklopite Normalna svetloba način.
2. Press the Power button once more to switch to Stroboskopska luč način.
3. Press the Power button again to activate SOS luč način.
4. Press the Power button one last time to turn off the LED light.

8. Specifikacije

Image: Visual representation of the Nekteck NK-JS19800 dimensions and non-slip grip design.

9. Vzdrževanje in shranjevanje

• Recharge the jump starter every 3 months to maintain optimal battery performance and extend its lifespan.
• Store the device in a cool, dry place away from direct sunlight, heat sources, and flammable materials.
• Keep the ports clean and free from dust and debris.
• Use a soft, dry cloth to clean the exterior of the unit. Do not use harsh chemicals or abrasive cleaners.

10. Odpravljanje težav

If you encounter issues with your Nekteck NK-JS19800, refer to the following common troubleshooting steps:

• Naprava se ne vklopi: Ensure the battery is charged. If completely depleted, it may take a few minutes to respond to charging.
• Vozilo se ne zažene: Check that the intelligent clamps are securely connected to the correct battery terminals. Ensure the jump starter has sufficient charge. The vehicle battery might be severely damaged and require professional assistance.
• Inteligentni klamps show an error: Odklopite in ponovno priključite clamps, ensuring correct polarity. If the error persists, the vehicle battery might be faulty or the clamps se lahko poškodujejo.
• Naprava se ne polni: Verify that the charging cable and adapter are correctly connected and functioning. Try a different USB-C cable or power source.

11. Garancija in podpora

Nekteck products are designed and manufactured to the highest quality standards. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship.

• For warranty claims or technical support, please contact Nekteck customer service.
• Račun shranite kot dokazilo o nakupu za potrditev garancije.