EDUP EP-9651GS-R PCI-E WiFi 6 Network Card with Bluetooth 5.2 Instruction Manual

1. Uvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your EDUP EP-9651GS-R PCI-E WiFi 6 Network Card. This device is designed to enhance your desktop PC's wireless connectivity with Wi-Fi 6 (802.11ax) technology and Bluetooth 5.2 capabilities, compatible with Windows 10 and Windows 11 64-bit operating systems. Please read this manual carefully before installation to ensure proper setup and optimal performance.

2. Vsebina paketa

Preverite, ali so v paketu vsi spodaj navedeni predmeti. Če kateri koli predmet manjka ali je poškodovan, se obrnite na prodajalca.

• 1 x EDUP EP-9651GS-R PCI-E WiFi 6 Network Card
• 2 x 6dBi Dual Band Antennas
• 1 x Bluetooth 9-pin USB Cable
• 1 x Nizka profile Bracket (for small form factor PCs)
• 1 x izvijač
• Montažni vijaki
• 1 x Driver CD (or download instructions)

3. Nastavitev in namestitev

3.1 Namestitev strojne opreme

Follow these steps to install the network card into your desktop PC. Ensure your computer is powered off and unplugged before proceeding.

1. Pripravite svoj računalnik: Power off your computer and unplug the power cord. Open the side panel of your PC case.
2. Poiščite režo PCI-E: Identify an available PCI-E X1, X4, X8, or X16 slot on your motherboard. This card is not compatible with standard PCI slots.
3. Insert the Network Card: Carefully align the network card with the chosen PCI-E slot and press it firmly until it is securely seated.
4. Connect the Bluetooth Cable: Locate the 9-pin USB header (often labeled F_USB) on your motherboard. Connect the white end of the provided Bluetooth 9-pin USB cable to the corresponding port on the network card, and the other end to the 9-pin USB header on your motherboard. This connection is essential for Bluetooth functionality.
   

   Image: The Bluetooth 9-pin USB cable connecting the EDUP WiFi 6 card to the motherboard's USB header.

5. Zavarujte kartico: Use the provided screws to secure the network card's bracket to your PC case. If you have a small form factor PC, use the included low-profile nosilec.
6. Pritrdite antene: Screw the two 6dBi dual-band antennas onto the connectors at the back of the network card. Adjust their position for optimal signal reception.
   

   Image: The EDUP WiFi 6 network card with its two external antennas installed on the rear of a PC case.
7. Zapri ohišje računalnika: Replace the side panel of your PC case and reconnect the power cord.

3.2 Namestitev gonilnika

After hardware installation, you need to install the drivers for both Wi-Fi and Bluetooth functionality. This card is compatible with Windows 10/11 64-bit.

1. Using the Driver CD: Insert the provided driver CD into your optical drive and follow the on-screen instructions to install the Wi-Fi and Bluetooth drivers.
2. Prenos gonilnikov: If your PC does not have an optical drive or if you encounter issues with the CD, download the latest drivers from the official Intel webspletno mesto ali EDUP webspletno mesto (szedup.com). Iskanje drivers compatible with the Intel AX200 chipset.
3. Postopek namestitve: Zaženite preneseno namestitev gonilnika files. Follow the prompts, accepting the license agreements and completing the installation. A system restart may be required after installation.

4. Navodila za uporabo

4.1 Povezovanje z Wi-Fi

Once the drivers are installed, you can connect to a wireless network:

1. Click the Wi-Fi icon in the system tray (usually in the bottom-right corner of your screen).
2. Na seznamu izberite želeno omrežje Wi-Fi.
3. Kliknite »Poveži se« in po potrebi vnesite omrežni varnostni ključ (geslo).
4. Your PC should now be connected to the Wi-Fi network.

4.2 Povezovanje naprav Bluetooth

To connect Bluetooth devices, ensure the Bluetooth 9-pin cable is correctly installed.

1. Pojdite v Nastavitve sistema Windows > Naprave > Bluetooth in druge naprave.
2. Prepričajte se, da je Bluetooth vklopljen.
3. Kliknite »Dodaj Bluetooth ali drugo napravo« in izberite »Bluetooth«.
4. Napravo Bluetooth preklopite v način seznanjanja.
5. Na seznamu izberite svojo napravo in sledite navodilom na zaslonu, da dokončate seznanjanje.

5. Specifikacije

6. Odpravljanje težav

If you encounter issues with your EDUP network card, refer to the following common solutions:

• No Wi-Fi or Bluetooth detected:
  • Ensure the card is securely seated in the PCI-E slot.
  • Verify that the Bluetooth 9-pin USB cable is correctly connected to both the card and the motherboard.
  • Check Device Manager in Windows to see if the Wi-Fi and Bluetooth adapters are recognized and have no error symbols.
  • Reinstall the latest drivers from the Intel or EDUP webmesto.
• Poor Wi-Fi signal or slow speeds:
  • Adjust the position of the external antennas for better reception.
  • Ensure your router supports Wi-Fi 6 (802.11ax) for optimal performance.
  • Preverite motnje drugih elektronskih naprav.
  • Posodobite vdelano programsko opremo usmerjevalnika.
• Bluetooth ne deluje:
  • Confirm the Bluetooth 9-pin USB cable is connected. This cable is mandatory for Bluetooth functionality.
  • Prepričajte se, da je Bluetooth omogočen v nastavitvah sistema Windows.
  • Reinstall the Bluetooth driver.

7. Garancija in podpora

EDUP provides a 3-year manufacturer replacement warranty for this product. Additionally, a 90-day no-questions-asked return policy is offered. For any assistance, technical support, or warranty claims, please contact us via Amazon message. We are committed to providing prompt and helpful service.