Mesqool Loud Alarm Clock with Bed Shaker

Uvod

The Mesqool CR1008i Loud Alarm Clock is designed to provide a reliable wake-up experience for heavy sleepers and individuals with hearing impairment. It features multiple alarm modes, a large LED display with adjustable brightness, a 7-color nightlight, and convenient dual USB charging ports.

Kaj je v škatli

• Glasna budilka
• Postelja Shaker
• Uporabniški priročnik
• Napajalni adapter
• 1.5-metrski kabel

Nastavitev

Vklop budilke

1. Connect the provided Power Adapter to the DC 5V IN port on the back of the alarm clock.
2. Plug the Power Adapter into a standard electrical outlet. The display will light up.
3. For battery backup, open the battery compartment on the back and insert 2 AAA batteries (not included). This will preserve time and alarm settings during a power outage.

Figure 1: Rear panel with power input, USB ports, and battery compartment. Insert 2 AAA batteries for backup power.

Connecting the Bed Shaker

4. Plug the Bed Shaker cable into the dedicated vibrator port on the back of the alarm clock.
5. Place the bed shaker under your pillow or mattress for effective vibration. The 70.8-inch long cord provides flexibility in placement.

Figure 2: The bed shaker positioned under a pillow for silent, vibrating alarm.

Navodila za uporabo

Nastavitev časa

• Pritisnite in držite NASTAVI ČAS button on the top panel. The hour digits will begin to flash.
• Uporabite + or - gumbi za nastavitev ure.
• Pritisnite NASTAVI ČAS again to confirm the hour and move to minute adjustment. The minute digits will flash.
• Uporabite + or - gumbe za nastavitev minut.
• Pritisnite NASTAVI ČAS še enkrat, da shranite nastavitev časa.
• Za preklop med 12-urnim in 24-urnim formatom časa pritisnite 12/24H gumb.
• Za vklop ali izklop poletnega časa (DST) pritisnite poletni čas gumb.

Setting Alarms (AL1 & AL2)

The clock supports two independent alarms (AL1 and AL2).

• Pritisnite in držite AL1 or AL2 gumb. Številke ure alarma bodo utripale.
• Uporabite + or - gumbe za nastavitev želene ure budilke.
• Pritisnite AL1 or AL2 again to confirm the hour and set the minutes. The alarm minute digits will flash.
• Uporabite + or - gumbe za nastavitev želenih minut alarma.
• Pritisnite AL1 or AL2 one more time to save the alarm setting.
• To choose the alarm mode (Buzzer, Vibrator, or Both), use the BUZZ/VIB slide switch on the side of the clock.
• To adjust the alarm volume, use the OBVEZNOST ALARMA slide switch on the side of the clock (Low, Medium, High).

Slika 3: stran view of the alarm clock with slide switches for selecting alarm mode (Buzzer, Vibrator, or Both) and alarm volume.

Funkcija dremeža

• Ko se oglasi alarm, pritisnite veliko SNOOZE OK button on the top of the clock to activate snooze. The alarm will pause for 9 minutes.
• Če želite alarm popolnoma izklopiti, pritisnite ALARM IZKL gumb.

Figure 4: The prominent snooze button on top of the alarm clock for easy access.

Nočna lučka in zatemnilnik

• The alarm clock features a 7-color night light. Press the SNOOZE OK button (which also functions as the light button) to cycle through the 7 colors or turn the night light off.
• The 7-inch LED display has a full slider dimmer (0%-100%). Use the DIMMER slide switch on the side of the clock to adjust the display brightness to your preference.

Figure 5: The alarm clock showcasing its 7-color night light options.

Dvojna vrata USB za polnjenje

• The alarm clock is equipped with two DC 5V/1A output USB charging ports on the back.
• Connect your smartphones, tablets, or other USB-powered devices to these ports for convenient charging.

Figure 6: Two smartphones charging simultaneously using the dual USB ports on the alarm clock.

Vzdrževanje

• Clean the alarm clock and bed shaker with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Pred čiščenjem se prepričajte, da je naprava izklopljena.
• Napravo hranite stran od vode in visoke vlažnosti.

Odpravljanje težav

No Display / Power Issue

• Check if the power adapter is securely plugged into both the clock and the wall outlet.
• Prepričajte se, da stenska vtičnica deluje pravilno, tako da vanjo priključite drugo napravo.
• If using battery backup, ensure batteries are correctly inserted and not depleted.

Alarm Not Sounding/Vibrating

• Verify that the alarm (AL1 or AL2) is activated and set to the correct time.
• Preverite BUZZ/VIB slide switch to ensure the desired mode (Buzzer, Vibrator, or Both) is selected.
• Prilagodite OBVEZNOST ALARMA slide switch to a higher setting if the buzzer is too quiet.
• Ensure the bed shaker is properly connected to its port.

Display Too Bright/Dim

• Uporabite DIMMER slide switch on the side of the clock to adjust the display brightness.

Specifikacije