JLab Play Gaming Wireless Earbuds Instruction Manual

Uvod

The JLab Play Gaming Wireless Earbuds are designed for an immersive gaming experience across mobile and console platforms. Featuring Bluetooth 5 with 60ms super-low latency, a built-in microphone with quick mute, and an included AUX console cord, these earbuds offer versatile connectivity and clear audio for both solo play and team communication.

Kaj je vključeno

• JLab Play Gaming Wireless Earbuds
• Potovalna torba
• AUX Console Cord (3.5mm)
• Micro USB polnilni kabel
• Multiple sizes of silicone ear tips for optimal fit

Image: JLab Play Gaming Wireless Earbuds, Micro USB charging cable, 3.5mm AUX console cord, travel bag, and various ear tip sizes.

Vodnik za namestitev

1. Začetno polnjenje

Before first use, fully charge your JLab Play Gaming Wireless Earbuds. Connect the provided Micro USB charging cable to the charging port on the earbuds and to a USB power source. The indicator light will show charging status.

Rapid Charge Feature: 10 minutes of charging provides over 1 hour of playtime.

2. Bluetooth Pairing (Mobile Devices)

1. Prepričajte se, da so slušalke izklopljene.
2. Press and hold the power button on the earbuds for approximately 10 seconds until the indicator light flashes red and blue. This indicates pairing mode.
3. V mobilni napravi (iOS ali Android) se pomaknite do nastavitev Bluetooth.
4. Select "JLab Play Earbuds" from the list of available devices.
5. Once connected, the indicator light on the earbuds will turn solid blue.

3. Console Connection (Wired)

For console gaming (Xbox, PlayStation, Nintendo Switch), use the included 3.5mm AUX console cord.

1. Locate the 3.5mm audio jack on your gaming console controller or device.
2. Plug one end of the AUX console cord into the earbuds' 3.5mm port.
3. Plug the other end of the AUX console cord into your console controller or device.
4. Ensure the microphone mute switch on the AUX cord is in the 'on' position if you intend to use voice chat.

Image: JLab Play Gaming Wireless Earbuds shown with the AUX console cord, illustrating wired connection capability.

Navodila za uporabo

1. Kontrole

The earbuds feature an in-line remote with buttons for various functions:

• Vklop/izklop: Pritisnite in držite glavni gumb.
• Predvajanje/pavza: Enkrat pritisnite glavni gumb.
• Sprejmi/končaj klic: Med dohodnim klicem enkrat pritisnite glavni gumb.
• Zavrni dohodni klic: Pritisnite in držite glavni gumb 2 sekunde.
• Povečaj glasnost: Enkrat pritisnite gumb '+'.
• Znižaj glasnost: Enkrat pritisnite gumb '-'.
• Sledi naprej: Pritisnite in držite gumb '+' 2 sekundi.
• Sledite nazaj: Pritisnite in držite gumb '-' 2 sekundi.
• Switch Gaming/Music EQ: Press and hold both '+' and '-' buttons for 2 seconds to cycle between Gaming and Music sound modes.

2. Uporaba mikrofona

The earbuds include a built-in microphone for voice communication. When using the AUX console cord, a dedicated mute switch is available on the cord for quick control.

• Microphone On: Ensure the switch on the AUX console cord is in the 'on' position.
• Microphone Off (Mute): Slide the switch on the AUX console cord to the 'off' position.

Image: A user engaged in mobile gaming while wearing the JLab Play Gaming Wireless Earbuds, highlighting their use for portable entertainment.

Vzdrževanje

1. Čiščenje

• Regularly clean the silicone ear tips with a soft, damp krpo.
• Gently wipe the earbuds and cables with a dry, soft cloth to remove dust and debris.
• Za čiščenje se izogibajte uporabi močnih kemikalij ali abrazivnih materialov.

2. Shranjevanje

• When not in use, store the earbuds in the provided travel bag to protect them from damage.
• The magnetic earbuds can be clicked together to prevent tangling when worn around the neck or stored.
• Hranite na hladnem in suhem mestu, stran od ekstremnih temperatur.

Image: The JLab Play Gaming Wireless Earbuds with their magnetic earpieces connected, demonstrating a convenient storage method.

Odpravljanje težav

1. Earbuds Not Pairing via Bluetooth

• Prepričajte se, da so ušesni čepki popolnoma napolnjeni.
• Confirm the earbuds are in pairing mode (flashing red and blue light).
• Izklopite in vklopite Bluetooth na napravi.
• Forget/delete "JLab Play Earbuds" from your device's Bluetooth list and attempt to re-pair.
• Slušalke premaknite bližje napravi.

2. Ni zvoka ali nizka glasnost

• Preverite glasnost tako na slušalkah kot na priključeni napravi.
• Ensure the earbuds are properly connected (Bluetooth or AUX).
• If using AUX, ensure the cable is fully inserted into both the earbuds and the device.
• Try switching between Gaming and Music EQ modes.

3. Mikrofon ne deluje

• If using the AUX console cord, verify the microphone mute switch is in the 'on' position.
• Ensure your device's microphone settings are configured to use the JLab Play Earbuds.
• Preizkusite mikrofon z drugo aplikacijo ali napravo.

Specifikacije

Informacije o garanciji

The JLab Play Gaming Wireless Earbuds come with a Dvoletna garancija JLab. For detailed terms and conditions, please refer to the official JLab webspletno mesto ali se obrnite na podporo strankam.

Podpora uporabnikom

For further assistance, troubleshooting, or warranty claims, please visit the official JLab support page:

Obiščite podporo JLab

Morda boste našli tudi koristne vire in pogosta vprašanja na njihovi webmesto.