Uvod
Hvala za nakupasing the BANDAI Complete Selection Modification (CSM) Double Driver Ver.1.5. This high-quality collectible item is designed to replicate the iconic Double Driver from the 'Kamen Rider W' series with enhanced detail and functionality. This manual provides essential information for assembly, operation, and maintenance to ensure optimal enjoyment of your product.
Vsebina paketa
Prosimo, preverite, ali so v vašem paketu vključeni vsi naslednji elementi:
- Double Driver Buckle Body
- Left Belt
- Right Belt
- Belt Stopper
- Maximum Slot Attachment
- Cyclone Memory
- Heat Memory
- Luna Memory
- Joker Memory
- Metal Memory
- Trigger Memory
- Navodila za uporabo (ta dokument)
Image: The six included Gaia Memories, essential for activating the Double Driver's functions.
Nastavitev
1. Namestitev baterije
The Double Driver requires batteries for its electronic functions. Please follow these steps:
- Gaia Memories: Each Gaia Memory requires 3 LR44 button batteries. These batteries are included with the product. Carefully open the battery compartment on each Gaia Memory and insert the batteries, ensuring correct polarity (+/-).
- Double Driver Main Unit: The main Double Driver unit requires 3 AAA batteries. These batteries are ni vključeno and must be purchased separately. Locate the battery compartment on the back of the main buckle unit, open it, and insert the AAA batteries, observing correct polarity.
Always use new batteries and dispose of old batteries responsibly. Do not mix old and new batteries, or different types of batteries.
2. Belt Assembly
The Double Driver belt consists of a main buckle and two detachable belt sections (left and right). The belt features a nylon strip design for size adjustment.
- Attach the left and right belt sections to the corresponding slots on the main Double Driver buckle. Ensure they click securely into place.
- Adjust the belt to your desired waist size (approximately 70cm to 100cm) using the adjustable nylon strip.
- Secure the belt with the provided belt stopper.
Image: The assembled Double Driver belt, ready for use.
Slika: Stranski profesionalecfile of the Double Driver belt, highlighting the adjustable strap mechanism.
Navodila za uporabo
The CSM Double Driver Ver.1.5 allows for various transformation and attack sounds by inserting Gaia Memories.
- Vklop: Ensure batteries are correctly installed in both the main unit and the Gaia Memories. The Double Driver does not have a separate power switch; it activates upon memory insertion.
- Inserting Gaia Memories: Select two Gaia Memories. Insert one into the left slot of the Double Driver buckle and the other into the right slot. Ensure they are fully inserted until you hear a click. The driver will announce the names of the inserted memories and play a transformation sound.
- Activating Finisher Attacks: To activate a finisher sound, press the central button or lever on the Double Driver buckle after inserting the Gaia Memories. The specific action may vary based on the combination of memories.
- Removing Gaia Memories: To remove a Gaia Memory, press the release button located near each slot and pull the memory out.
- Independent Driver Use: The left belt section features a new attachment/detachment mechanism, allowing the main driver body to be used independently, as seen in the series.
Image: Demonstrating the independent use of the Double Driver buckle.
Vzdrževanje
Proper care will extend the life and enjoyment of your CSM Double Driver Ver.1.5.
- Čiščenje: Wipe the product with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Shranjevanje: Store the product in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, remove all batteries to prevent leakage and corrosion.
- Ravnanje: Avoid dropping the product or subjecting it to strong impacts, which can damage internal components or the exterior finish.
Odpravljanje težav
If you encounter issues with your Double Driver, please refer to the following common solutions:
- Brez zvoka/brez napajanja:
- Check if batteries are correctly installed in both the main driver unit (AAA) and the Gaia Memories (LR44).
- Ensure batteries are fresh and not depleted. Replace if necessary.
- Verify that Gaia Memories are fully inserted into their respective slots.
- Gaia Memory Not Recognized:
- Ensure the Gaia Memory is inserted completely and correctly.
- Check the batteries within the specific Gaia Memory.
- Inspect the memory's contacts and the driver's slots for any obstructions or damage.
- Belt Not Staying Attached:
- Ensure the belt sections are firmly clicked into place on the main buckle.
- Check for any damage to the attachment points on both the buckle and the belt sections.
Če težave po poskusu teh rešitev še vedno obstajajo, se obrnite na podporo strankam.
Specifikacije
| Model | CSM Double Driver Ver.1.5 |
| Znamka | BANDAI |
| Material | Nylon (belt), ABS/PVC (buckle and memories) |
| barva | Red, Black, Silver (main unit) |
| Obseg pasu | Approx. 70cm to 100cm (adjustable) |
| Batteries (Gaia Memory) | LR44 button battery x 3 per memory (included) |
| Batteries (Main Driver) | AAA batteries x 3 (sold separately) |
| Priporočena starost | 15 leta in več |
| Dimenzije paketa | 40.2 x 20.8 x 13 cm |
| Teža | 1.34 kg |
| Referenca proizvajalca | prepoved990343222 |
Informacije o garanciji
Specific warranty details for the BANDAI CSM Double Driver Ver.1.5 are not provided in the available product information. Please refer to the retailer's return policy or contact BANDAI customer service for warranty inquiries.
Podpora uporabnikom
For further assistance, questions, or to report any issues not covered in this manual, please contact BANDAI customer support through their official website or the retailer from whom the product was purchased. Please have your product model number (CSM Double Driver Ver.1.5) and manufacturer reference (ban990343222) available when contacting support.