Uvod
Welcome and thank you for choosing the MOUNTUP Full Motion TV Wall Mount. This manual provides essential information for the safe and correct installation, operation, and maintenance of your TV wall mount. Please read all instructions carefully before beginning installation to ensure proper setup and to prevent damage or injury.
Varnostne informacije
Med namestitvijo in uporabo vedno upoštevajte naslednje varnostne ukrepe:
- Zmogljivost teže: Do not exceed the maximum weight capacity of 88 lbs (40 kg). Overloading can result in serious injury or property damage.
- Struktura stene: Prepričajte se, da lahko montažna površina (stena) varno podpira skupno težo nosilca in televizorja.
- UL na seznamu: This product is UL Listed, indicating it meets specific safety standards.
- Strokovna pomoč: Če ste glede katerega koli dela postopka namestitve negotovi, se posvetujte s usposobljenim strokovnjakom.
- otroci: Med namestitvijo naj se otroci ne zadržujejo v območju namestitve.
- Orodja: Use appropriate tools and follow all instructions for their safe operation.
Vsebina paketa
Before installation, verify that all components are present and undamaged. If any parts are missing or defective, contact MOUNTUP customer service.
- Sestavljanje stenske plošče
- TV nosilci (2 kosa)
- Različni vijaki za televizorje (M4, M6, M8)
- Distančniki in podložke
- Lag Bolts and Concrete Anchors (for specific wall types)
- Nivo mehurčkov
- viličasti ključ
- Predloga za namestitev
Specifikacije
| Številka modela | 28XTu2564 |
| Znamka | MONTAŽA |
| Združljivost velikosti televizorja | 26 do 65 palcev |
| Zmogljivost teže | 88 lbs (40 kg) |
| Združljivost VESA | Min: 75x75mm (3"x3"), Max: 400x400mm (16"x16") |
| Združljivost tipov sten | 16" Wood Studs (Not for alone dry wall application). Concrete/Brick walls require anchors. |
| Kot nagiba | +5° / -13° |
| Zasučni kot | ±45° (Maximum swivel angle depends on TV size) |
| Prilagoditev ravni | ±3° (Post-installation) |
| Razdalja do stene | 3" do 15.7" |
| Material | Legirano jeklo |
Nastavitev in namestitev
Pregledi pred namestitvijo
Before you begin, it is crucial to confirm compatibility and prepare your installation area.
- Preverite vzorec VESA za televizor: Locate the four mounting holes on the back of your TV and measure the horizontal and vertical distance between them. This mount supports VESA patterns from 75x75mm to 400x400mm.
- Check TV Weight and Size: Ensure your TV weighs no more than 88 lbs (40 kg) and is between 26 and 65 inches.
- Preverite vrsto stene: This mount is designed for installation on 16-inch wood studs. For concrete or brick walls, specific anchors (included) are required. Ne nameščajte samo na mavčne plošče.
Figure 1: Compatible Wall Types. The mount is suitable for 16-inch wood studs, concrete walls, and brick walls. Anchors are required for concrete and brick installations.
Figure 2: TV Size and VESA Compatibility. This mount fits TVs from 26 to 65 inches with VESA patterns ranging from 75x75mm to 400x400mm.
Koraki namestitve
Follow these steps carefully for a secure installation. The main part of the TV mount is pre-assembled for convenience.
Slika 3: Konecview of the 3-Step Easy Installation Process.
1. korak: pritrdite nosilce na TV
- Televizor previdno položite z zaslonom navzdol na mehko, čisto površino, da preprečite poškodbe zaslona.
- Align the TV brackets with the mounting holes on the back of your TV.
- Iz kompleta strojne opreme izberite ustrezne vijake, podložke in distančnike, ki ustrezajo pritrdilnim luknjam vašega televizorja.
- Securely fasten the brackets to the TV using a screwdriver. Do not overtighten.
2. korak: stensko ploščo pritrdite na steno
- Določite želeno višino in lokacijo televizorja.
- Use a stud finder to locate the center of two adjacent wood studs (16-inch spacing). Mark the pilot hole locations.
- For concrete or brick walls, use a drill to create pilot holes at the marked locations and insert the appropriate anchors.
- Position the wall plate against the wall, aligning the holes with your marks. Use the included bubble level to ensure it is perfectly horizontal.
- Secure the wall plate to the wall using the lag bolts (for wood studs) or anchors and bolts (for concrete/brick). Tighten all bolts firmly.
Figure 4: Stud Spacing Compatibility. Ensure your wall studs align with the mount's design for secure installation.
3. korak: Obesite in pritrdite televizor na stensko ploščo
- S pomočjo previdno dvignite televizor s pritrjenimi nosilci in jih obesite na stensko ploščo.
- Prepričajte se, da je televizor varno pritrjen na stensko ploščo.
- Locate the safety screws or locking mechanisms on the bottom of the TV brackets and tighten them to prevent accidental dislodging.
Navodila za uporabo
This full motion TV mount allows for flexible adjustment of your TV's position to achieve optimal viewing kotov.
Prilagoditev Viewkota
- Nagib: The mount allows for a tilt range of +5° (upward) to -13° (downward). Gently push or pull the top or bottom of your TV to adjust the vertical angle. This helps reduce glare from lights or windows and prevents neck strain.
Figure 5: Tilt Adjustment. Adjust the TV's vertical angle to minimize glare and enhance viewudobje.
- Vrtljiva: The articulating arm allows the TV to swivel up to ±45° left or right. The maximum swivel angle depends on the size of your TV and its distance from the wall. Gently push the TV to the desired horizontal angle.
Figure 6: Swivel Adjustment. Reposition your TV horizontally for optimal viewiz različnih delov sobe.
- Razširitev: The mount can extend your TV from 3 inches (retracted) to 15.7 inches (extended) from the wall. Pull the TV gently forward or push it back towards the wall.
- Izravnavanje: After installation, you can make minor horizontal adjustments of ±3° to ensure your TV is perfectly level. This adjustment is typically done by loosening specific bolts on the TV brackets, adjusting, and then re-tightening. Refer to the detailed PDF manual for specific instructions.
Figure 7: Post-Installation Leveling. Fine-tune the TV's horizontal alignment after mounting.
Vzdrževanje
Redno vzdrževanje pomaga zagotoviti dolgo življenjsko dobo in varno delovanje vašega stenskega nosilca za televizor.
- Čiščenje: Nosilec obrišite z mehko, suho krpo, da odstranite prah. Izogibajte se uporabi abrazivnih čistil ali topil.
- Periodični pregledi: Občasno preverite vse vijake in matico, da se prepričate, da so trdno priviti. Po potrebi jih ponovno privijte.
- Gibanje: If the mount's movement becomes stiff, a small amount of silicone-based lubricant can be applied to the articulating joints.
Odpravljanje težav
If you encounter issues during or after installation, consider the following common solutions:
- TV ni raven: Use the post-installation leveling feature (±3°) as described in the Operating Instructions. Ensure the wall plate was installed level initially.
- Nosilec se zdi ohlapen: Re-check all wall mounting bolts and TV bracket screws for tightness. Ensure the wall type is appropriate and anchors (if used) are correctly installed.
- Težavnost prilagajanja: Ensure no cables are snagged or obstructing movement. If joints are stiff, apply a small amount of lubricant.
- Manjkajoči deli: Refer to the Package Contents section. If parts are missing, contact MOUNTUP customer service.
Garancija in podpora
MOUNTUP TV wall mount series are backed by a 3-letni načrt zaščite. Our dedicated customer support team is available to answer any questions you may have regarding installation, operation, or product issues.
For further assistance or detailed diagrams, please refer to the official installation manual: