GODOX TT350N

Godox TT350N Speedlite Flash for Nikon DSLR Cameras User Manual

Model: TT350N

1. Uvod

Hvala za nakupasing the Godox TT350N Speedlite Flash. This compact and versatile flash unit is designed for Nikon DSLR cameras, offering full TTL functionality, high-speed sync, and a built-in 2.4G wireless X system. This manual provides detailed instructions for proper operation and maintenance to ensure optimal performance.

2. Varnostne informacije

  • Ta izdelek naj bo vedno suh. Ne uporabljajte v dežju ali damp pogojev.
  • Ne razstavljajte. Če so potrebna popravila, je treba ta izdelek poslati v pooblaščeni servisni center.
  • Hraniti izven dosega otrok.
  • Do not use the flash unit in the presence of flammable gases, chemicals, or other materials.
  • Do not touch the flash head immediately after use, as it may be hot.
  • Use only AA batteries as specified. Do not mix new and old batteries or different types of batteries.

3. Izdelek je končanview

3.1 Ključne lastnosti

  • Full TTL Functionality: Supports HSS (up to 1/8000s), FEC, front and rear curtain sync, multi-flash, and manual flash.
  • Dot-Matrix LCD: Provides clear and simple operation with an intuitive display.
  • Zmogljive funkcije: Includes TTL autoflash, 1/8000 high-speed synchronization, flash exposure compensation, flash exposure lock, and modeling flash.
  • Wireless Grouping System: Features a 2.4G wireless system with up to 5 groups and 32 channels to meet various shooting requirements.
  • Zaščita pred pregrevanjem: Designed with protection against overheating for extended use.
  • Učinkovito delovanje: Guide Number (GN) of 36 (m ISO 100, @ 105mm), 22 power outputs (1/1-1/128). Recycling time between 0.1 and 2.2 seconds, providing approximately 210 full power flashes with 2500mA Ni-MH batteries.
  • Funkcija povečave: Automatic and manual zoom from 24mm to 105mm.
  • Personal Function Settings (C.Fn): Customizable settings for personalized operation.
  • Široka združljivost: Can act as a master unit to control other Godox slave units (AD600, AD600M, AD360II-C, AD360II-N, V860IIN, V850II, TT685N, TT600) or as a slave unit triggered by Godox master units (X1T-N, V860IIN, V850II, TT685N, TT600).

3.2 Vsebina paketa

  • 1 x Godox TT350N Flash Unit
  • 1 x Mini stojalo
  • 1 x zaščitna torbica
  • 1 x barvni filter
  • 1 x uporabniški priročnik
  • 1 x VFOTO Lens Cleaning Cloth
Godox TT350N Flash unit and included accessories

Image: The Godox TT350N flash unit, mini stand, protective case, color filter, user manual, and lens cleaning cloth are included in the package.

3.3 Imena in funkcije delov

Diagram of Godox TT350N flash unit with numbered parts and their descriptions

Image: Detailed diagram showing the various parts of the Godox TT350N flash and their corresponding functions.

  1. Zoom Selection Button
  2. Gumb za izbiro načina
  3. Custom Function Setting Button (reusable button, long press for 2 seconds)
  4. Testni gumb/indikator pripravljenosti bliskavice
  5. LCD plošča
  6. Gumb za hitro sinhronizacijo
  7. S1/S2 Optic Slave Triggering Selection Button (in non-wireless mode)
  8. Group/Channel Button (reusable button, in wireless mode)
  9. Stikalo za napajanje
  10. Zaklepni obroč
  11. Gumb za izbiro brezžičnega omrežja (gumb za večkratno uporabo, dolg pritisk za 2 sekundi)
  12. Hotshee
  13. Gumb za nastavitev
  14. Izberite Dial
  15. Predal za baterije
  16. Optični kontrolni senzor
  17. Žarek za pomoč pri ostrenju
  18. Flash glava
  19. Catchlight plošča
  20. Vgrajena široka plošča

4. Nastavitev

4.1 Namestitev baterije

The Godox TT350N uses two AA batteries. Ni-MH batteries are recommended for optimal performance and recycling time. Alkaline batteries (LR6) can also be used.

  1. Odprite pokrov predalčka za baterije, ki se nahaja na strani bliskavice.
  2. Insert two AA batteries according to the polarity indicators (+/-) inside the compartment.
  3. Trdno zaprite pokrov prostora za baterije.

4.2 Montaža na kamero

To mount the flash unit onto your camera's hotshoe:

  1. Loosen the lock ring on the flash unit by turning it counter-clockwise.
  2. Slide the flash's hotshoe fully into your camera's hotshoe mount.
  3. Tighten the lock ring by turning it clockwise until the flash is securely attached to the camera.
Godox TT350N flash unit with hotshoe connection detail

Image: The Godox TT350N flash unit showing its hotshoe for mounting onto a camera.

4.3 Vklop/izklop

  • To power on, slide the Power Switch to the 'ON' position. The flash will begin charging, and the red flash ready indicator will light up when ready.
  • To power off, slide the Power Switch to the 'OFF' position.

5. Načini delovanja

The TT350N offers various flash modes to suit different shooting scenarios. Press the NAČIN gumb za preklapljanje med razpoložljivimi načini.

5.1 Način samodejne bliskavice TTL

In TTL mode, the flash output is automatically adjusted by the camera to achieve correct exposure. This mode is ideal for quick shooting and changing light conditions.

  • Pritisnite NAČIN button until 'TTL' is displayed on the LCD panel.
  • The flash will automatically adjust its output based on the camera's metering.

5.2 Ročni način bliskavice (M)

Manual mode allows you to set the flash output power manually from 1/1 (full power) to 1/128 in 1/3 stop increments. This provides precise control over lighting.

  • Pritisnite NAČIN button until 'M' is displayed.
  • Obrnite Izberite Dial za nastavitev moči bliskavice.

5.3 Multi Flash Mode (Multi)

Multi flash mode (stroboscopic flash) fires a series of rapid flashes during a single exposure, creating multiple images of a moving subject in one frame.

  • Pritisnite NAČIN button until 'Multi' is displayed.
  • Uporabite Izberite Dial in NASTAVI button to adjust the flash frequency (Hz), number of flashes, and flash output.

5.4 Visokohitrostna sinhronizacija (HSS)

High-Speed Sync allows the flash to synchronize with all camera shutter speeds, up to 1/8000s. This is useful for shooting with wide apertures in bright conditions or freezing fast motion.

  • Pritisnite SINHRONIZACIJA button to activate HSS. The HSS icon will appear on the LCD.

5.5 Sinhronizacija prve/druge zavese

First curtain sync fires the flash at the beginning of the exposure. Second curtain sync fires the flash just before the shutter closes, creating a trail of light behind moving subjects.

  • These settings are typically controlled via your camera's flash menu. Refer to your camera's manual for specific instructions.

5.6 Kompenzacija osvetlitve bliskavice (FEC)

FEC omogoča natančno nastavitev moči bliskavice v načinu TTL, s čimer bliskavica postane svetlejša ali temnejša za do ±3 stopnje v korakih po 1/3 stopnje.

  • In TTL mode, press the NASTAVI button. The FEC value will blink.
  • Obrnite Izberite Dial to adjust the FEC value.
  • Pritisnite NASTAVI znova pritisnite za potrditev.

5.7 Modeling Flash

The modeling flash fires a brief burst of light to help you preview svetlobni učinek, preden dejansko posnamete fotografijo.

  • Press the camera's depth-of-field preview button (if available) to activate the modeling flash.

6. Wireless Flash Function

The TT350N supports both 2.4G wireless transmission and optical transmission for off-camera flash control.

6.1 2.4G Wireless Transmission (Master/Slave)

The built-in Godox 2.4G wireless X system allows the TT350N to function as a master or slave unit, controlling or being controlled by other compatible Godox flashes and triggers.

Diagram showing Godox TT350N as master and slave in a wireless flash setup

Image: Illustration of the TT350N operating as both a master and slave unit within the Godox 2.4G wireless system.

  • Glavna enota: The TT350N can control other Godox slave units such as AD600, AD600M, AD360II-C, AD360II-N, V860IIN, V850II, TT685N, and TT600.
  • Podrejena enota: The TT350N can be controlled by Godox master units like X1T-N, V860IIN, V850II, TT685N, and TT600.
  • To activate wireless mode, long press the GR/CH button (Wireless Selection Button) for 2 seconds.
  • Uporabite GR/CH gumb in Izberite Dial to set the group (A, B, C) and channel (1-16).
  • Ensure all units are set to the same channel and group for proper communication.

6.2 Optical Transmission (S1/S2 Slave)

The TT350N can also function as an optical slave, triggered by another flash unit's light pulse.

  • Način S1: The flash will fire in response to the first flash from a master flash. This mode is suitable for manual flash environments.
  • Način S2: The flash will ignore the pre-flash from a master TTL flash and fire in response to the second flash. This mode is suitable for TTL master flashes.
  • To activate S1 or S2 mode, press the SUŽENJ button (S1/S2 Optic Slave Triggering Selection Button) until 'S1' or 'S2' is displayed.

7. C.Fn Custom Functions

The TT350N features customizable functions (C.Fn) that allow you to tailor the flash's behavior to your preferences.

  • Dolgo pritisnite C.Fn button for 2 seconds to enter the custom function settings menu.
  • Uporabite Izberite Dial to navigate through the available functions.
  • Pritisnite NASTAVI button to select a function and then use the Izberite Dial spremeniti svojo vrednost.
  • Pritisnite NASTAVI button again to confirm the change.
  • Dolgo pritisnite C.Fn button again to exit the custom function settings.

8. Vzdrževanje

  • Clean the flash unit regularly with a soft, dry cloth. Avoid using solvents or harsh chemicals.
  • Remove batteries when the flash is not in use for an extended period to prevent leakage.
  • Bliskavico shranjujte na hladnem in suhem mestu, stran od neposredne sončne svetlobe in ekstremnih temperatur.
  • Avoid strong impacts or dropping the unit.

9. Odpravljanje težav

  • Bliskavica se ne sproži: Check battery level, ensure flash is securely mounted, verify camera flash settings, and confirm flash is powered on and ready.
  • Flash output is too dark/bright: Adjust FEC (Flash Exposure Compensation) in TTL mode or manual power output in M mode. Check camera ISO and aperture settings.
  • Wireless triggering issues: Ensure master and slave units are on the same channel and group. Check distance and line of sight for optical triggering. Verify battery levels in all units.
  • Flash head does not rotate/tilt smoothly: Do not force movement. If resistance is felt, check for obstructions or contact customer support.

10. Specifikacije

ModelTT350N
Vodilno število (GN)36 (ISO 100, 105mm)
Pokritost bliskavice24 do 105 mm (samodejni/ročni zoom)
Trajanje bliskavice1/350 do 1/20000 sekund
Sistem za nadzor izpostavljenostiSamodejna bliskavica TTL, ročna bliskavica, več bliskavic
Kompenzacija osvetlitve bliskavice (FEC)±3 stopnje v korakih po 1/3 stopnje
Način sinhronizacijeHitra sinhronizacija (do 1/8000 s), sinhronizacija prve zavese, sinhronizacija druge zavese
Brezžična funkcija bliskaviceMaster, Slave, Off (2.4G Wireless X System, Optical S1/S2)
Nadzorovane podrejene skupine3 (A, B, and C)
Kanali16 (1-16)
2.4G Transmission RangeDo 100 metre
Vir napajanja2 x AA batteries (Ni-MH recommended)
Čas recikliranjaPribližno 0.1–2.2 sekunde (z baterijami Ni-MH)
Utripa s polno močjoApprox. 210 (with 2500mA Ni-MH batteries)
Varčevanje z energijoAutomatic power off after approx. 90 seconds of idle operation (60 minutes if set as slave)
Mere (D x Š x V)3.8 x 6.2 x 14 cm
Teža (brez baterij)200 g
Vrsta namestitveHot Shoe-mount
Združljive kamereNikon DSLR cameras (D810, D800, D750, D700, D610, D7100, D5200, D90, etc.)

11. Garancija in podpora

Godox products are manufactured to high standards and are guaranteed against manufacturing defects. For warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official Godox webspletnega mesta. Prosimo, shranite dokazilo o nakupu za uveljavljanje garancije.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.