Navodila za uporabo stenskega nosilca za TV Pipishell PIMF4 Full Motion

1. Uvod

This manual provides detailed instructions for the safe and proper installation and operation of your Pipishell PIMF4 Full Motion TV Wall Mount. Please read all instructions carefully before beginning installation to ensure correct setup and to prevent potential injury or damage. Keep this manual for future reference.

2. Varnostne informacije

Always ensure the wall structure can support the combined weight of the mount and your television. If you are unsure about the strength of your wall, consult a qualified professional. Do not exceed the maximum weight capacity of 99 lbs (45 kg). This mount is designed for installation on 12" or 16" wood studs, solid concrete, or brick walls. Do not install on drywall alone. Always use appropriate safety gear during installation.

3. Vsebina paketa

Verify that all components are present and undamaged before installation. The package includes the full motion TV wall mount, various mounting hardware (screws, anchors, washers), and a step-by-step instruction guide. If any parts are missing or damaged, please contact customer service.

4. Specifikacije

5. Preverjanje združljivosti

Before installation, confirm your TV's compatibility with the Pipishell PIMF4 mount.

• Velikost televizorja: Compatible with most 26-65 inch flat or curved TVs.
• Teža televizorja: Podpira televizorje do 45 kg (99 lbs).
• Vzorec VESA: Check the four mounting holes on the back of your TV. The distance between these holes (width x height) must be between 100x100mm and 400x400mm.
• Vrsta stene: Designed for installation on 12" or 16" wood studs, solid concrete, or brick walls.
• TV Ports: Ensure the mount will not block any necessary TV ports or cables.

Slika: Združljivost nadview for Pipishell TV Wall Mount, showing supported TV sizes (26-65in), VESA patterns (Max 400x400mm, Min 100x100mm), and wall types (12"/16" Wood Studs).

Image: Illustration advising users to locate TV ports to ensure the mount does not block cables.

6. Vodič za namestitev

Follow these steps for a secure and successful installation. It is recommended to have two people for TV mounting.

1. korak: Namestite nosilce za televizor

Secure the TV brackets to the back of your television using the appropriate screws and washers provided. Ensure the brackets are centered and firmly attached.

Image: Step 1 of installation, showing how to attach the TV brackets to the television.

2. korak: Namestite stensko ploščo

Locate the desired mounting position on your wall. Use a stud finder to identify wood studs if applicable. Mark the drill holes and pre-drill according to the instructions. Secure the pre-assembled wall plate to the wall using the provided lag bolts and washers. Ensure it is level and securely fastened.

Image: The pre-assembled wall plate, ready for mounting, highlighting its design for easy installation.

Image: Step 2 of installation, demonstrating the process of installing the wall plate.

Step 3: Hang TV

Carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure the TV is securely seated on the mount. Engage any safety locks or screws to prevent accidental dislodgement.

Image: Step 3 of installation, showing how to hang the TV onto the wall mount.

Videoposnetek namestitve

7. Upravljanje in nastavitve

The Pipishell PIMF4 mount offers various adjustments for optimal viewing.

• Podaljšanje in umik: Gently pull the TV away from the wall to extend it up to 16.42 inches for closer viewing. Push the TV back towards the wall to retract it to 3.7 inches to save space.
• Vrtljiva: The mount allows for a +/-45° swivel from left to right. Carefully push or pull the TV to the desired angle.
• Nagib: Prilagodite navpičnico viewing angle with a +5°/-15° tilt range. Loosen the tilt adjustment screws, set the desired angle, and re-tighten the screws.
• Izravnavanje: After installation, fine-tune the TV's horizontal level by +/-3°. This can be done by adjusting the leveling screws on the TV brackets.

Image: Visual guide to the mount's adjustable features including extension, retraction, tilt (+5°/-15°), and level (±3°).

8. Vzdrževanje

Redno vzdrževanje zagotavlja dolgo življenjsko dobo in varno delovanje vašega stenskega nosilca za televizor.

• Periodični pregled: Občasno preverite vse vijake in povezave, da se prepričate, da so trdno priviti in varno pritrjeni.
• Čiščenje: Nosilec očistite z mehko, suho krpo. Izogibajte se uporabi abrazivnih čistil ali topil, ki bi lahko poškodovala površino.
• Preverjanje gibanja: Occasionally move the TV through its full range of motion to ensure smooth operation of the articulating arms.

9. Odpravljanje težav

Če imate kakršne koli težave s stenskim nosilcem televizorja, si oglejte naslednje pogoste rešitve:

• TV ni raven: Use the +/-3° leveling adjustment feature to correct the horizontal alignment. Ensure all mounting screws are tightened evenly.
• Težave pri premikanju televizorja: Check for any obstructions or overtightened joints. Lubricate moving parts if necessary with a silicone-based spray (avoid oil-based lubricants).
• Nosilec se zdi ohlapen: Immediately remove the TV and re-check all wall plate and TV bracket connections. Ensure lag bolts are securely fastened into studs or concrete. Do not use the mount if it feels unstable.

10. Garancija in podpora strankam

Pipishell is committed to providing professional customer service. If you have any questions regarding the installation, product selection, or require assistance, please do not hesitate to contact our U.S.-based product support team. Refer to your product packaging or the official Pipishell webspletno mesto za kontaktne podatke.