Konec izdelkaview
The Trevi SLD 3P50 is a digital clock thermometer featuring a large, backlit LCD display. It includes a programmable alarm and a snooze function, designed for clear readability and ease of use in various indoor environments.
Slika: spredaj view of the Trevi SLD 3P50 Digital Clock Thermometer, displaying the current time, date, day of the week, and indoor temperature.
Vsebina paketa
- 1 x Trevi SLD 3P50 Digital Clock Thermometer
- 1 x Uporabniški priročnik (ta dokument)
- Opomba: Baterije niso priložene in jih je treba kupiti posebej.
Nastavitev
1. Namestitev baterije
- Poiščite predal za baterije na zadnji strani naprave.
- Odprite pokrov prostora za baterije.
- Insert the required batteries (typically AAA, refer to the compartment label for exact type and polarity). Ensure correct polarity (+/-).
- Trdno zaprite pokrov prostora za baterije.
2. Začetni vklop
Upon battery installation, the device will power on automatically. The display will show default time and date settings, and the current temperature.
3. Nastavitev časa in datuma
- Pritisnite NAČIN button to cycle through display modes until the time setting mode is active (usually indicated by flashing digits).
- Uporabite UP in DOL gumba za nastavitev ure, nato pa pritisnite NAČIN za potrditev in premik na minute.
- Repeat this process for setting the year, month, and day.
- Pritisnite NAČIN ponovno za izhod iz načina nastavitev.
Navodila za uporabo
1. Načini prikaza
Pritisnite NAČIN button to switch between different display modes, such as Time, Date, and Alarm settings.
2. Nastavitev alarma
- Pritisnite NAČIN until the alarm time is displayed (often indicated by an alarm icon).
- Pritisnite in držite NAČIN dokler ne utripajo številke ure budilke.
- Uporabite UP in DOL gumbe za nastavitev želene ure budilke.
- Pritisnite NAČIN to confirm and move to minutes, then set minutes.
- Pritisnite NAČIN again to save the alarm setting.
- Za vklop/izklop alarma pritisnite VKLOP / IZKLOP ALARMA button (or similar, refer to device buttons). An alarm icon will appear/disappear on the display.
3. Uporaba funkcije dremeža
Ko se oglasi alarm, pritisnite tipko SNOOZE / LUČ button (usually located on top) to temporarily silence the alarm. The alarm will sound again after a few minutes (typically 5-10 minutes).
4. Aktivacija osvetlitve ozadja
Pritisnite SNOOZE / LUČ gumb za vklop osvetlitve ozadja zaslona za nekaj sekund, kar izboljša vidljivost v slabih svetlobnih pogojih.
5. Prikaz temperature
The device continuously displays the ambient temperature. Some models may allow switching between Celsius and Fahrenheit. If available, press a dedicated ° C / ° F button or refer to the manual for specific button combinations.
Vzdrževanje
1. Čiščenje
- Napravo obrišite z mehko, suho krpo.
- Ne uporabljajte abrazivnih čistil, topil ali kemičnih razpršil, saj lahko poškodujejo površino ali notranje komponente.
2. Zamenjava baterije
When the display dims or functions become erratic, it is time to replace the batteries. Follow the battery installation steps in the Nastavitev section. Always replace all batteries at the same time with new ones of the same type.
3. Shranjevanje
Če naprave ne boste uporabljali dlje časa, odstranite baterije, da preprečite puščanje in morebitno škodo.
Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Zaslon je prazen ali temen. | Prazne ali prazne baterije; nepravilna namestitev baterij. | Baterije zamenjajte z novimi in pri tem pazite na pravilno polarnost. |
| Alarm se ne oglasi. | Alarm ni aktiviran; glasnost alarma je prenizka (če je nastavljiva). | Ensure the alarm function is turned ON. Check if there's a volume setting. |
| Napačen čas/datum. | Ura/datum nista bila pravilno nastavljena ali pa sta bila po menjavi baterije ponastavljena. | Sledite navodilom »Nastavitev časa in datuma« v razdelku Nastavitev. |
| Odčitek temperature se zdi netočen. | Device placed near heat sources, direct sunlight, or drafts. | Relocate the device to a stable indoor environment away from extreme temperature fluctuations. |
Specifikacije
Image: Trevi SLD 3P50 Digital Clock Thermometer, illustrating its approximate height (11.18 cm) and width (13.46 cm).
| Funkcija | Podrobnost |
|---|---|
| Številka modela | 0SL3P50 |
| Dimenzije (D x Š x V) | 50 x 50 x 28 cm |
| Teža | 160 gramov |
| Znamka | Trevi |
| barva | Rdeča |
| Vrsta zaslona | Digital, Backlit LCD |
| Posebne lastnosti | Temperature display, Large screen, Alarm, Snooze |
| Vir napajanja | Baterijski pogon |
| Baterije priložene | št |
| Vrsta namestitve | Namizni nosilec |
| Material | Nerjaveče jeklo |
| Način delovanja | Električni |
| Vrsta gibanja ure | Kvarc |
Garancija in podpora
This product is covered by a standard manufacturer's warranty. For detailed warranty information, please refer to the warranty card included with your purchase or contact Trevi customer support.
For technical assistance, troubleshooting not covered in this manual, or service inquiries, please visit the official Trevi webspletno mesto ali se obrnite na njihovo službo za pomoč strankam. Kontaktne podatke običajno najdete na embalaži izdelka ali na proizvajalčevem webmesto.
- Proizvajalec: Trevi
- Model: SLD 3P50 (0SL3P50)
- ASIN: B07Y3T2BFV