TecTake 403238 / 800747 Swivel Office Chair Instruction Manual

Uvod

This manual provides detailed instructions for the assembly, operation, and maintenance of your TecTake 403238 / 800747 Swivel Office Chair. Please read these instructions carefully before assembly and use to ensure proper function and longevity of your product. This ergonomic office chair is designed for comfort and support during extended periods of sitting, featuring a padded seat, backrest, and headrest, along with adjustable height and tilt functions.

Image: The TecTake 403238 / 800747 Swivel Office Chair, showcasing its black faux leather upholstery, padded armrests, and five-star base with casters.

Varnostna navodila

To prevent injury or damage to the chair, please observe the following safety guidelines:

• Ensure all components are securely fastened before use. Regularly check and tighten screws.
• Do not exceed the maximum weight capacity of the chair (refer to specifications).
• Izogibajte se stanju na stolu ali njegovi uporabi kot stopničastega stolčka.
• Keep hands and fingers clear of moving parts, especially during height and tilt adjustments.
• Stol uporabljajte na ravni površini, da preprečite prevračanje.
• Embalažni material hranite izven dosega otrok, da preprečite nevarnost zadušitve.
• Do not expose the chair to direct sunlight or extreme temperatures, as this may damage the material.

Seznam komponent

Pred začetkom montaže preverite, ali so vsi deli prisotni in nepoškodovani. Če kateri koli deli manjkajo ali so poškodovani, ne nadaljujte z montažo in se obrnite na podporo strankam.

• Naslonjalo
• Sedežna blazina
• Nasloni za roke (levi in ​​desni)
• Plošča mehanizma (pod sedežem)
• Plinski dvižni cilinder
• Pokrov plinskega dvigala
• Baza s petimi zvezdicami
• Kolesca (5 kosov)
• Strojna oprema (vijaki, podložke, imbus ključ)

Navodila za montažo

Follow these steps to assemble your office chair. It is recommended to assemble the chair on a soft, clean surface to prevent scratches.

Step 1: Attach Casters to the Base

Insert each of the five casters into the holes at the end of each leg of the five-star base. Push firmly until they click into place.

Step 2: Insert Gas Lift

Place the gas lift cylinder into the central hole of the five-star base. Then, slide the gas lift cover over the gas lift cylinder.

Step 3: Attach Mechanism Plate to Seat

Align the mechanism plate with the pre-drilled holes on the underside of the seat cushion. Ensure the adjustment lever faces the front of the seat. Secure it with the provided screws and tighten them using the Allen key.

Image: Close-up of the chair's adjustment lever, indicating its function for height and tilt control. This lever is part of the mechanism plate that attaches to the seat.

Step 4: Attach Armrests to Seat and Backrest

Attach the armrests to the sides of the seat cushion using the designated screws. Do not fully tighten yet. Then, align the backrest with the armrests and secure it with screws. Once all screws are in place, tighten them evenly and securely.

5. korak: Priključite sklop sedeža na plinsko dvigalo

Carefully place the assembled seat and backrest onto the gas lift cylinder. The tapered end of the gas lift will fit into the central hole of the mechanism plate. Press down firmly on the seat to ensure a secure connection.

Slika: spredaj view of the fully assembled TecTake office chair, highlighting the padded seat, backrest, and armrests.

Your TecTake office chair is now assembled. Before use, ensure all connections are tight and the chair is stable.

Navodila za uporabo

Your TecTake office chair offers several adjustments to customize your seating experience:

Nastavitev višine

Za nastavitev višine sedeža poiščite ročico na desni strani, pod sedežem.

• Za dvig sedeža: Dvignite ročico, medtem ko se odmaknete od sedeža. Sedež se bo samodejno dvignil. Spustite ročico na želeni višini.
• Za spuščanje sedeža: Dvignite ročico, medtem ko ostanete sedeči. Sedež se bo spustil. Spustite ročico na želeni višini.

Tilt Function and Lock

The chair features a tilt mechanism allowing the backrest and seat to recline together.

• To enable tilt: Pull the same lever (used for height adjustment) outwards from the chair. The chair will now allow you to recline.
• To lock tilt: Push the lever inwards towards the chair. The chair will lock in its upright position.

Image: An illustration demonstrating the range of height adjustment and the reclining tilt function of the office chair.

Nastavitev napetosti nagiba

Beneath the seat, at the front, there is a round knob. This knob controls the tension of the tilt mechanism.

• To increase tension (harder to recline): Obrnite gumb v smeri urinega kazalca.
• To decrease tension (easier to recline): Obrnite gumb v nasprotni smeri urinega kazalca.

Vzdrževanje

Redno vzdrževanje bo podaljšalo življenjsko dobo in videz vašega pisarniškega stola.

• Čiščenje: Za oblazinjenje iz umetnega usnja obrišite z mehko,amp cloth. For stubborn stains, use a mild soap solution and wipe dry immediately. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the material.
• Okvir in osnova: Wipe metal and plastic parts with a damp krpo.
• Kolesca: Periodically clean casters to remove hair, dust, and debris that may hinder smooth movement.
• Strojna oprema: Every 3-6 months, check all screws and bolts to ensure they are tight. Retighten as necessary to maintain stability and safety.
• Izogibajte se preobremenitvi: Do not exceed the chair's stated weight capacity.

Odpravljanje težav

Če imate kakršne koli težave s stolom, si oglejte naslednje pogoste težave in rešitve:

• Škripanje stolov:

  Check all screws and bolts and tighten them. A small amount of silicone lubricant can be applied to moving metal parts, avoiding contact with plastic or upholstery.
• Stol se ne nastavlja po višini:

  Ensure the gas lift lever is fully engaged. If the issue persists, the gas lift cylinder may be faulty and require replacement. Contact customer support.

• Stol se zdi nestabilen/majajoč:

  Verify that all screws, especially those connecting the armrests to the seat and backrest, are securely tightened. Ensure the gas lift is properly seated in the base and mechanism plate.

• Kolesca se ne vrtijo gladko:

  Remove any hair, dust, or debris that may be caught in the caster wheels. Clean the wheels and axles. Ensure the casters are fully inserted into the base.

Specifikacije

Mere (približno)

Image: Technical drawing illustrating the approximate dimensions of the TecTake office chair in centimeters. Key measurements include seat width (55 cm), seat depth (52 cm), backrest width (48 cm), adjustable seat height (47-55 cm), and overall height (115-123 cm).

• Overall Height: 115-123 cm
• Seat Height (adjustable): 47-55 cm
• Širina sedeža: 55 cm
• Globina sedeža: 52 cm
• Backrest Width: 48 cm
• Armrest Height (from seat): 68.5-76.5 cm
• Base Diameter: 67 cm

Garancija in podpora

Specific warranty information for the TecTake 403238 / 800747 Swivel Office Chair is not provided in this document. For details regarding warranty coverage, spare parts availability, or technical support, please refer to the official TecTake website or contact their customer service directly. Information regarding spare parts availability was not provided in the product data.

Lahko obiščete TecTake Brand Store on Amazon za več informacij.