1. Pomembne varnostne informacije
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be hazardous or even fatal.
- OPOZORILO: Nevarnost električnega udara. Pred namestitvijo ali servisiranjem izklopite napajanje na odklopniku ali v omarici z varovalkami.
- Vse električne povezave morajo biti v skladu z lokalnimi predpisi, odloki ali Nacionalnim električnim kodeksom (NEC). Če niste seznanjeni s pravilnimi električnimi priključki, se obrnite na usposobljenega električarja.
- Uporabljajte samo žične konektorje s certifikatom UL/ETL.
- Ne prekoračite priporočene wattage for light bulbs.
- Ta naprava je zasnovana za samo za notranjo uporabo.
- Wear gloves during installation to prevent fingerprints and damage to the finish.
2. Vsebina paketa
Pred začetkom namestitve preverite, ali so prisotne vse komponente:
- 1x KCO Lighting FZ-KQ39-MNTL 3-Light Track Lighting Fixture
- 1x Mounting Hardware Kit
3. Specifikacije
| Funkcija | Specifikacija |
|---|---|
| Znamka | KCO |
| Številka modela | FZ-KQ39-MNTL |
| barva | zlato |
| Material | Metal, Brass (Shade) |
| Slog | Moderno |
| Oblika svetilke | V središču pozornosti |
| Notranja/zunanja uporaba | Notranja |
| Vir napajanja | AC |
| Vir svetlobe | LED (Bulbs included) |
| Število svetlobnih virov | 3 |
| voltage | 110-240 voltov |
| Wattage (na žarnico) | 5 vatov |
| Svetlost | 1350 lumens (total) |
| Podnožje žarnice | E26 |
| Možnost zatemnitve | Yes (requires dimmable bulbs and dimmer switch) |
| Vrsta namestitve | Ceiling Mount, Flush Mount |
| Mere predmeta (D x Š x V) | 29.5"D x 4.7"Š x 8.7"V (75 cm D x 12 cm Š x 22 cm V) |
| Teža predmeta | 3.39 funta |
Diagram mer izdelka
4. Navodila za namestitev (Nastavitev)
Priporočljiva je strokovna namestitev. Pred nadaljevanjem se prepričajte, da je napajanje izklopljeno.
- Pripravite se na namestitev: Turn off the electricity at the main fuse box or circuit breaker.
- Montažni nosilec: Nosilec pritrdite na razvodno omarico v stropu s priloženimi vijaki. Prepričajte se, da je varno pritrjen.
- Električne povezave: Connect the fixture's wires to the corresponding household wires (black to black, white to white, ground to ground) using appropriate wire connectors. Ensure all connections are tight and secure.
- Varna naprava: Carefully push the wired connections into the junction box. Align the fixture base with the mounting bracket and secure it with the provided screws.
- Namestite žarnice: Screw E26 base LED bulbs into each socket. It is recommended to use bulbs shorter than 3.94 inches (10cm) for optimal fit.
- Obnovi moč: Turn the electricity back on at the main fuse box or circuit breaker.
Namestitev končanaview
5. Navodila za uporabo
- Vklop/izklop: Za vklop ali izklop svetilke uporabite stensko stikalo.
- Prilagajanje svetlobnih glav: The three spotlight heads are adjustable. They can be rotated vertically up to 90° and horizontally up to 180°. Gently pivot each light head to direct illumination as desired.
- Funkcionalnost zatemnitve: If you have installed dimmable E26 LED bulbs and a compatible dimmer switch (not included), you can adjust the brightness of the lights using the dimmer switch.
Adjustable Light Heads
6. Vzdrževanje
- Čiščenje: To clean the fixture, ensure power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents as they may damage the finish.
- Zamenjava žarnice: Ensure power is off before replacing bulbs. Allow bulbs to cool completely. Unscrew the old E26 bulb and replace it with a new E26 LED bulb. For best fit, use bulbs with a length shorter than 3.94 inches (10cm).
Združljiva vrsta žarnice
7. Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Lučka se ne prižge | 1. Napajanje je izklopljeno. 2. Ohlapna žična povezava. 3. Okvarjena žarnica. | 1. Check circuit breaker/wall switch. 2. Verify all wire connections are secure (power off first). 3. Zamenjajte žarnico. |
| Luči utripajo | 1. Incompatible dimmer switch/bulbs. 2. Zrahljan priključek žarnice. | 1. Ensure dimmable LED bulbs are used with a compatible LED dimmer switch. 2. Tighten bulbs in sockets. |
| Nezadostna svetlobna moč | 1. Nizka vattage žarnice. 2. Incorrect light direction. | 1. Replace with higher lumen E26 LED bulbs (up to 5W per bulb). 2. Adjust the light heads to illuminate desired areas. |
If you encounter issues not listed here or solutions do not resolve the problem, please contact KCO Lighting customer support or a qualified electrician.
8. Garancija in podpora
KCO Lighting offers a 3-letna garancija on this product, covering manufacturing defects and malfunctions under normal use.
For warranty claims, technical assistance, or any questions regarding your KCO Lighting fixture, please contact our customer support team. Refer to your purchase documentation or the KCO Lighting webspletno mesto za kontaktne podatke.
Please have your model number (FZ-KQ39-MNTL) and proof of purchase ready when contacting support.