Uporabniški priročnik za Kicker 46KISLOC2 K-serije stereo linijski izhodni pretvornik

Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of the Kicker 46KISLOC2 K-Series Stereo Line-Output Converter. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

The Kicker 46KISLOC2 is designed to integrate aftermarket amplifiers with factory car audio systems by converting speaker-level signals into high-quality RCA line-level signals. It also provides a remote turn-on output for amposvežilci.

Ključne značilnosti

• Converts speaker-level signals to RCA line-level signals.
• Provides a powerful 100 milli-amp, 12-volt remote turn-on output using DC offset, eliminating the need for a separate switched 12V source.
• Accepts input signals up to 55 watts (16 volts).
• Delivers an output signal up to 8 volts.
• Maintains a flat 20Hz-20kHz frequency response at all volume levels.
• Compatible with standard radios and most smart radios (amplifier output of smart radio must have 60Ω impedance or lower).
• Features an LED indicator for DC offset turn-on.

Vsebina paketa

Preverite, ali so v paketu prisotni vsi elementi:

• Kicker 46KISLOC2 Line-Output Converter unit
• Uporabniški priročnik (ta dokument)

Varnostne informacije

OPOZORILO:

• Pred kakršnimi koli električnimi deli vedno odklopite akumulator vozila.
• Ensure proper wiring and connections to prevent short circuits or damage to the unit or vehicle's electrical system.
• Če niste prepričani glede katerega koli koraka namestitve, se posvetujte s profesionalnim monterjem avtomobilskih avdio sistemov.
• Naprave ne izpostavljajte vlagi ali ekstremnim temperaturam.

Nastavitev in namestitev

The KISLOC2 is designed for straightforward installation. Follow these steps carefully:

Shema ožičenja

Refer to the diagram below for proper wiring connections. The KISLOC2 features input wires for speaker signals and output RCA jacks for line-level signals, plus a remote turn-on wire.

Image: Detailed wiring diagram for the Kicker 46KISLOC2, showing input wires (White: L+, White/BLK: L-, Grey: R+, Grey/BLK: R-, Black: Chassis Gnd) and output connections (Blue: 12V Remote out (100mA), RCAx2: Line level out). A red LED indicates DC offset turn-on activity.

Koraki povezave

1. Prepoznajte žice zvočnikov: Locate the speaker wires from your factory radio or amplifier that you intend to use as input for the KISLOC2. Typically, these are the rear speaker wires for subwoofer applications or full-range speakers for multi-channel ampnastavitve lifierja.
2. Priključite vhodne žice:
   • Povežite Bela wire to the Left (+) speaker wire.
   • Povežite Bela/črna wire to the Left (-) speaker wire.
   • Povežite siva wire to the Right (+) speaker wire.
   • Povežite Siva/črna wire to the Right (-) speaker wire.
   • Povežite Črna wire to a reliable chassis ground point in the vehicle.
3. Priključite RCA izhode: Plug your RCA cables from the KISLOC2's RCA output jacks into the RCA input jacks of your aftermarket amplifier.
4. Povežite daljinski vklop: Povežite Modra wire from the KISLOC2 to the remote turn-on input of your aftermarket amplifier(s). This wire provides a 12V signal to turn on the amplifier when the factory radio is active.
5. Zavarujte enoto: Mount the KISLOC2 in a secure, dry location away from excessive heat or moisture. Ensure wires are not pinched or exposed to sharp edges.

Slika: spredaj view of the Kicker 46KISLOC2 Line-Output Converter, showing the main unit with multiple colored wires extending from one end and two RCA output jacks on the other end. The KICKER logo is visible on the top surface.

Slika: Pod kotom view of the Kicker 46KISLOC2 Line-Output Converter, showcasing the compact black housing, the array of input wires, and the dual RCA output ports. The KICKER branding is visible on the top surface.

Delovanje

Once properly installed, the KISLOC2 operates automatically. It senses the audio signal from your factory radio and converts it to a line-level signal for your amplifier. The integrated DC offset detection activates the remote turn-on output.

• Vklop: When your factory radio is turned on, the KISLOC2 will detect the DC offset in the speaker signal and activate its remote turn-on output (blue wire), signaling your amplifier to turn on. A red LED on the unit will illuminate to indicate active DC offset turn-on.
• Avdio izhod: The converted line-level audio signal will be sent through the RCA outputs to your amplifier.
• Ugasniti: When the factory radio is turned off, the KISLOC2 will cease to detect the DC offset, and the remote turn-on output will deactivate, turning off your amplifier.

Vzdrževanje

The Kicker 46KISLOC2 is designed for maintenance-free operation. No user-serviceable parts are inside. To ensure longevity:

• Enota naj bo čista in brez prahu in umazanije.
• Prepričajte se, da so vse ožičene povezave varne in brez korozije.
• Izogibajte se izpostavljanju enote ekstremnim temperaturam ali neposredni sončni svetlobi.

Odpravljanje težav

If you experience issues with your KISLOC2, refer to the following common problems and solutions:

Specifikacije

Informacije o garanciji

Kicker products are warranted against defects in material and workmanship for a period of one (1) year from the date of original purchase. Please retain your sales receipt as proof of purchase. This warranty is valid only for the original purchaser and is not transferable.

The warranty does not cover damage due to improper installation, accident, misuse, abuse, negligence, normal wear and tear, or unauthorized modification. For full warranty terms and conditions, please refer to the official Kicker website or contact Kicker customer support.

Podpora uporabnikom

For technical assistance, troubleshooting, or warranty inquiries, please contact Kicker customer support:

• Webspletno mesto: www.kicker.com
• telefon: Glejte Kicker webstran za regionalne kontaktne številke.
• E-pošta: Glejte Kicker webspletno mesto za e-poštne naslove za podporo.

When contacting support, please have your product model number (46KISLOC2) and proof of purchase ready.