1. Uvod
This manual provides essential instructions for the safe operation, assembly, maintenance, and troubleshooting of your WEN PW2800 2800 PSI Gas Pressure Washer. Please read this manual thoroughly before operating the unit to ensure proper use and to prevent injury or damage.

Image 1.1: The WEN PW2800 2800 PSI Gas Pressure Washer. This image displays the complete pressure washer unit, highlighting its compact design with large wheels for portability, the engine, and the hose/nozzle storage area.
2. Varnostne informacije
Operating a gas pressure washer requires adherence to strict safety guidelines to prevent serious injury or property damage. Always wear appropriate personal protective equipment (PPE) including eye protection, hearing protection, and sturdy footwear. Never point the spray gun at people, animals, or electrical outlets. Ensure adequate ventilation when operating the engine to avoid carbon monoxide poisoning. Keep children and pets away from the operating area. Always disconnect the spark plug wire before performing any maintenance.
Varnost goriva: Gasoline is highly flammable. Store fuel in approved containers, away from ignition sources. Refuel in a well-ventilated area with the engine off and cool. Do not smoke while refueling.
Opozorilo o visokem tlaku: The high-pressure spray can cause severe injury. Never operate the unit without the spray gun and nozzle securely attached. Always engage the trigger lock when not spraying.
3. Vsebina paketa
Ob razpakiranju preverite, ali so prisotne vse komponente:
- WEN PW2800 Gas Pressure Washer Unit
- 25-foot Reinforced High-Pressure Hose
- Quick-Connect Spray Gun with Wand
- Four Quick-Connect Nozzles: 0-degree (Red), 25-degree (Green), 40-degree (White), and Soap (Black)
- Onboard Detergent Tank
- Navodila za uporabo
4. Montaža
Za sestavljanje visokotlačnega čistilnika sledite tem korakom:
- Pritrdite ročaj: Secure the upper handle to the main frame using the provided hardware. Ensure it is firmly in place.
- Namestite kolesa: Attach the 12-inch wheels to the axle on the main frame. These wheels provide easy mobility.
- Priključitev visokotlačne cevi: Connect one end of the 25-foot reinforced high-pressure hose to the pump outlet and the other end to the spray gun. Ensure all connections are tight to prevent leaks.
- Mount Spray Gun and Nozzles: The unit includes designated storage for the spray gun and quick-connect nozzles. Place them in their respective holders for convenient access.

Slika 4.1: Bližnji posnetek view of the pressure washer's integrated storage for the high-pressure hose and spray gun, designed for organized and easy access.

Image 4.2: Detail of the pressure washer's 12-inch wheels and sturdy frame, illustrating the design for enhanced mobility across various terrains.
5. Setup Before Operation
Before starting the pressure washer, perform the following setup steps:
- Dodajte motorno olje: The engine is shipped without oil. Fill the crankcase with 10W-30 4-stroke engine oil. For general use (above 40°F), 30W, 4-stroke engine oil is recommended. Do not overfill.
- Dodajte gorivo: Fill the fuel tank with fresh, unleaded gasoline. Do not use E85 or E15 fuel. Ensure the fuel cap is securely tightened.
- Priključite oskrbo z vodo: Connect a garden hose to the water inlet on the pressure washer pump. Ensure the garden hose is free of kinks and has a steady water supply. Turn on the water supply completely.
- Odstranite zrak iz sistema: Squeeze the trigger on the spray gun to allow water to flow through the pump and hose, expelling any trapped air. Continue until a steady stream of water emerges from the nozzle.
6. Navodila za uporabo
6.1. Zagon motorja
- Prepričajte se, da je enota na ravni površini.
- Obrnite ventil za gorivo v položaj 'ON'.
- Move the choke lever to the 'CHOKE' position (cold start).
- Stikalo motorja nastavite na 'ON'.
- Močno povlecite ročico zaganjalnika, dokler se motor ne zažene.
- Ko se motor zažene, postopoma premaknite ročico dušilne lopute v položaj 'RUN'.
6.2. Using Nozzles and Detergent
The WEN PW2800 includes four quick-connect nozzles for various cleaning tasks:
- 0-degree (Red): Pin-point stream for intense cleaning of small, tough spots. Use with extreme caution.
- 25-degree (Green): Fan spray for general cleaning of most surfaces.
- 40-degree (White): Wide fan spray for gentle cleaning of delicate surfaces.
- Milo (črno): Nizkotlačni pršilnik za nanašanje detergenta.

Image 6.1: Integrated storage for the quick-connect nozzles on the pressure washer, showing the color-coded system for easy identification.

Image 6.2: The quick-connect spray gun and wand, illustrating the connection point for various nozzles.
To change nozzles, pull back the collar on the spray gun wand, insert the desired nozzle, and release the collar to lock it in place. Always ensure the engine is off and the trigger is locked when changing nozzles.
6.3. Nanašanje detergenta
- Fill the onboard detergent tank with up to 32 fluid ounces of pressure washer safe detergent.
- Attach the black (soap) nozzle to the spray gun.
- Start the engine and squeeze the trigger. The pressure washer will automatically draw detergent from the tank and mix it with the water at low pressure.
- Apply detergent to the cleaning surface. Allow it to soak for a few minutes (refer to detergent instructions).
- Switch to a high-pressure nozzle (e.g., 25-degree or 40-degree) to rinse the surface thoroughly.

Image 6.3: Close-up of the onboard soap tank and its connection, showing the hose for detergent intake.
6.4. Zaustavitev
- Izklopite stikalo motorja.
- Obrnite ventil za gorivo v položaj "IZKLOP".
- Zaprite dovod vode.
- Stisnite sprožilec brizgalne pištole, da sprostite preostali tlak v sistemu.
- Odklopite vrtno cev in visokotlačno cev.
7. Vzdrževanje
Redno vzdrževanje zagotavlja optimalno delovanje in podaljšuje življenjsko dobo vašega visokotlačnega čistilnika.
7.1. Vzdrževanje motorja
- Menjava olja: Motorno olje zamenjajte po prvih 5 urah uporabe, nato pa vsakih 50 ur ali letno.
- Zračni filter: Zračni filter preglejte in očistite vsakih 25 ur ali pogosteje v prašnih pogojih. Če je poškodovan, ga zamenjajte.
- Vžigalna svečka: Svečko preglejte in očistite letno ali vsakih 100 ur. Po potrebi jo zamenjajte.
7.2. Vzdrževanje črpalke
- Vhodni zaslon: Regularly check and clean the water inlet screen to prevent debris from entering the pump.
- Zimovanje: If storing the unit in freezing temperatures, winterize the pump with pump protector to prevent damage.
7.3. Shranjevanje
Pred dolgotrajnim shranjevanjem:
- Drain all fuel from the tank or use a fuel stabilizer.
- Run the engine until it stops from lack of fuel.
- Drain water from the pump and hoses.
- Store the unit in a clean, dry area, away from direct sunlight and extreme temperatures.
8. Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Motor se ne zažene | Ni goriva; Stikalo motorja IZKLOPLJENO; Napačna dušilka; Težava s svečko | Dodajte gorivo; Vklopite stikalo; Nastavite dušilno loputo; Preverite/zamenjajte svečko |
| Nizek pritisk vode | Insufficient water supply; Clogged nozzle; Air in pump; Kinked hose | Ensure full water flow; Clean nozzle; Purge air; Straighten hose |
| Detergent se ne dozira | Soap nozzle not attached; Detergent tank empty; Clogged filter | Attach black nozzle; Refill tank; Clean detergent filter |
| Motor teče grobo | Postano gorivo; Zamašen zračni filter; Umazana svečka | Izpraznite in napolnite s svežim gorivom; Očistite/zamenjajte zračni filter; Očistite/zamenjajte svečko |
9. Specifikacije
- Model: PW2800
- Motor: 173 cc 4-stroke OHV
- Najvišji tlak: 2800 PSI
- Največji pretok: Do 2.3 galon na minuto (GPM)
- Dolžina cevi: 25 čevljev
- Nozzles Included: 0°, 25°, 40°, Soap
- Velikost kolesa: 12 palcev
- Kapaciteta rezervoarja za detergent: 32 unč tekočine
- vir energije: Na plin
- Skladno s CARB: ja
10. Garancija in podpora
The WEN PW2800 2800 PSI Gas Pressure Washer is backed by a two-year limited warranty. For warranty claims, technical assistance, or to locate authorized service technicians, please contact WEN customer service. Keep your purchase receipt as proof of purchase for warranty validation.