Xvive U3C 2.4GHz Wireless System for Condenser Microphones: User Manual

1. Uvod

Thank you for choosing the Xvive U3C 2.4GHz Wireless System. This manual provides detailed instructions for the setup, operation, and maintenance of your wireless system, designed for use with condenser microphones, audio mixers, and PA systems. Please read this manual thoroughly before use to ensure optimal performance and longevity of your device.

2. Izdelek je končanview

2.1 Komponente

The Xvive U3C system includes the following components:

• U3C Transmitter (XLR male)
• U3C Receiver (XLR female)
• USB polnilni kabel
• Uporabniški priročnik

Figure 2.1: What's in the Box - Xvive U3C wireless system, charging cable, and user manual.

2.2 Ključne lastnosti

• Fantomska moč: Supports both +12V and +48V phantom power for condenser microphones.
• Zvok visoke ločljivosti: Delivers 24-bit/48kHz audio with a broad frequency response from 20Hz to 20kHz.
• Optimized 2.4GHz Wireless Band: Provides a solid RF connection over a 90-foot (27.4 meters) range.
• Izjemno nizka zakasnitev: Less than 5ms latency for real-time performance.
• Več kanalov: Supports up to 6 simultaneous channels.
• Dolgotrajna baterija: Up to 5 hours of battery life for both transmitter and receiver.
• Razmerje med signalom in šumom: Up to 107 dB for clear, detailed audio.

Figure 2.2: Xvive U3C Transmitter (left) and Receiver (right).

Figure 2.3: Key features of the Xvive U3C system.

3. Navodila za nastavitev

3.1 Polnjenje enot

Before first use, fully charge both the transmitter and receiver using the provided USB charging cable. Connect the cable to a standard USB power adapter (not included). The charging indicator light will show charging status.

3.2 Priključitev oddajnika

1. Connect the U3C Transmitter directly to the XLR output of your condenser microphone.
2. Prepričajte se, da je mikrofon varno pritrjen.
3. Select the appropriate phantom power (+12V or +48V) on the transmitter to match your microphone's requirements. Refer to your microphone's manual for its phantom power needs.

Figure 3.1: Transmitter connected to a condenser microphone.

3.3 Priključitev sprejemnika

1. Connect the U3C Receiver to an XLR input on your audio mixer, PA system, or other audio interface.
2. Ensure the receiver is firmly seated in the input.

Figure 3.2: Receiver connected to an audio mixer.

Figure 3.3: Transmitter and receiver in a typical setup with a PA system.

4. Navodila za uporabo

4.1 Vklop/izklop

• Za vklop pritisnite in držite MOČ button on both the transmitter and receiver until the indicator lights illuminate.
• Za izklop pritisnite in držite tipko MOČ button on both units until the indicator lights turn off.

4.2 Izbira kanala

• The U3C system offers 6 channels. To change the channel, briefly press the KANAL button on both the transmitter and receiver.
• Ensure both units are set to the same channel for proper operation. The channel number will be indicated by illuminated LEDs.
• If you experience interference, try switching to a different channel.

4.3 Mute Function (Transmitter Only)

• The transmitter features a MUTE button. Press it once to mute the microphone signal. Press again to unmute.

4.4 Phantom Power Selection (Transmitter Only)

• The transmitter has dedicated buttons for +12 V in +48 V phantom power. Select the appropriate voltage required by your condenser microphone.
• Pozor: Ensure the correct phantom power is selected to avoid damage to your microphone.

4.5 Indikatorji stanja baterije

Both units have LED indicators to show battery status. Refer to the device for specific light patterns indicating charge level and low battery warnings.

5. Vzdrževanje

5.1 Polnjenje

Recharge the units when the battery indicator shows low power. Use only the provided USB cable or a compatible USB power source. Avoid overcharging by disconnecting once fully charged.

5.2 Čiščenje

Wipe the units with a soft, dry cloth. Do not use liquid cleaners or solvents, as these may damage the finish or internal components.

5.3 Shranjevanje

Store the Xvive U3C system in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, ensure units are partially charged (around 50%) to preserve battery health.

6. Odpravljanje težav

7. Specifikacije

8. Garancija in podpora

For warranty information and technical support, please refer to the official Xvive webspletno mesto ali se obrnite na lokalnega distributerja. Račun shranite kot dokazilo o nakupu za morebitne garancijske zahtevke.

Za dodatno pomoč obiščite: Xvive Official Store on Amazon