Extreme Networks Summit X460-24p Managed Switch User Manual

Uvod

This manual provides instructions for the Extreme Networks Summit X460-24p, a high-performance, managed Layer 3 Ethernet switch designed for enterprise and data center environments. It features 24 Gigabit Ethernet ports with Power over Ethernet (PoE) capabilities, along with additional SFP and shared Gigabit SFP ports for flexible connectivity.

Varnostne informacije

Varnostne smernice

• Always disconnect all power supply inputs before removing any panel for servicing.
• This device contains a Class 1 Laser product. Avoid direct eye exposure to beam.
• Med namestitvijo zagotovite pravilno ozemljitev.
• Refer to the installation manual for power cord selection and additional compliance markings.

Vsebina paketa

Kaj je v škatli

• Extreme Networks Summit X460-24p Switch
• Napajalni kabel (odvisno od regije)
• Komplet za montažo v stojalo
• Dokumentacija (ta priročnik)

Konec izdelkaview

The Summit X460-24p switch is designed for efficient network management and high-speed data transfer.

Zadnja plošča

This image displays the rear panel of the Summit X460-24p switch, highlighting the power input, fan modules, and the SummitStack ports. The overall chassis is purple.

Podrobno view of the SummitStack ports (Stack Port 1 and Stack Port 2) located on the rear of the switch, used for stacking multiple switches.

Oznaka izdelka

This label provides critical identification information for the switch, including Model: 16403, Summit X460-24p, System No.: 800323-00-03, and Serial No.: 1052G-03941.

Izbirne komponente

This image shows the label for an optional Extreme Networks Summit 750W PoE AC Power Supply Unit (PSU), Model 10931, System No. 800382-00-03, Serial No. 1053A-41986.

This image displays the label for an optional Extreme Networks SummitStack Module, Model 16419, System No. 800384-00-01, Serial No. 1122G-02565.

Nastavitev

Navodila za namestitev

Namestitev v stojalo

The Summit X460-24p is designed for standard 19-inch rack mounting. Use the provided rack-mounting kit to secure the switch in a server rack. Ensure adequate ventilation around the unit.

Priključna moč

Connect the power cord to the AC power inlet on the rear of the switch and then to a grounded electrical outlet. The switch will power on automatically.

Povezovanje omrežnih kablov

• Connect Ethernet cables from your network devices to the 24 10/100/1000Base-T PoE ports on the front panel.
• For uplink or fiber connections, use the SFP or shared Gigabit SFP ports.
• For stacking, connect SummitStack ports on multiple switches using appropriate stacking cables.

Dostop do začetne konfiguracije

Access the switch's management interface via a console cable connected to the console port, or through a web browser if the switch has a default IP address configured. Refer to the Extreme Networks documentation for detailed initial setup procedures.

Navodila za uporabo

Osnovno delovanje

Vklop/izklop

The switch powers on automatically when connected to a power source. To power off, disconnect the power cord. For proper shutdown, it is recommended to use the software-based shutdown command if available.

LED indikatorji

Observe the LED indicators on the front panel for status information regarding power, system health, port activity, and PoE status. Consult the full product documentation for a detailed explanation of each LED's behavior.

Upravljalni vmesnik

The switch can be managed via a Command Line Interface (CLI) accessible through the console port or Telnet/SSH, or through a web-based graphical user interface (GUI).

Vzdrževanje

Nega in vzdrževanje

Čiščenje

Keep the switch clean and free of dust. Use a soft, dry cloth for external cleaning. Do not use liquid or aerosol cleaners.

Posodobitve vdelane programske opreme

Periodically check the Extreme Networks support website for firmware updates to ensure optimal performance and security. Follow the provided instructions for firmware upgrade procedures.

Moduli ventilatorjev in napajalnikov

The switch may feature hot-swappable fan and power supply modules. Refer to the Extreme Networks documentation for instructions on replacement if necessary.

Odpravljanje težav

Pogoste težave

Brez moči

• Prepričajte se, da je napajalni kabel varno priključen tako na stikalo kot na električno vtičnico.
• Preverite, ali vtičnica deluje.

Port Link Down

• Preverite povezavo ethernetnega kabla na obeh koncih.
• Preverite, ali je priključena naprava vklopljena in deluje pravilno.
• Check the port status via the management interface.

Težave z omrežno povezljivostjo

• Verify IP configuration and network settings.
• Check for conflicting IP addresses.
• Consult network diagnostics tools.

Specifikacije

Tehnične specifikacije

Garancija in podpora

Informacije o garanciji

This product typically comes with a 90-day limited warranty. For specific warranty terms and conditions, please refer to the official Extreme Networks warranty statement or contact your vendor.

Tehnična podpora

For technical assistance, visit the official Extreme Networks support webspletno mesto ali se obrnite na njihovo službo za stranke. Ko iščete podporo, imejte pripravljen model izdelka in serijsko številko.