Xigmatek Venom X RGB ATX Mid-Tower PC Case User Manual

1. Izdelek je končanview

The Xigmatek Venom X RGB is an ATX mid-tower PC case designed for high-performance gaming and workstation builds. It features tempered glass panels for showcasing internal components and integrated RGB lighting for customizable aesthetics. This manual provides instructions for assembly, operation, and maintenance of your PC case.

Slika 1: Notranji view of the Xigmatek Venom X RGB PC case, highlighting the spacious interior, motherboard mounting area, and drive bays. RGB fans are visible at the front and rear.

2. Varnostne informacije

Please read and understand all safety instructions before installing or operating this product. Failure to do so may result in personal injury or damage to the product.

• Pred kakršno koli namestitvijo ali vzdrževanjem vedno izključite napajalnik iz stenske vtičnice.
• Avoid exposing the case to moisture or extreme temperatures.
• S kaljenimi steklenimi ploščami ravnajte previdno, da preprečite lomljenje.
• Poskrbite za pravilno ozemljitev, da preprečite električni udar.
• Majhne dele in vijake hranite izven dosega otrok.
• Use appropriate tools for installation to avoid damaging components.

3. Vsebina paketa

Preverite, ali so v vašem paketu prisotne vse spodaj navedene komponente:

• Xigmatek Venom X RGB ATX Mid-Tower PC Case
• Accessory box (screws, standoffs, cable ties)
• Uporabniški priročnik (ta dokument)

4. Nastavitev in namestitev

Follow these steps to assemble your PC system within the Xigmatek Venom X RGB case.

4.1 Odstranjevanje stranskih plošč

Carefully unscrew the thumbscrews on the rear of the case to remove the tempered glass side panel and the steel side panel. Place them on a soft, flat surface to prevent scratches.

4.2 Namestitev matične plošče

1. Install the necessary motherboard standoffs into the motherboard tray according to your motherboard's form factor (Extended ATX, ATX, Micro-ATX, Mini-ITX).
2. Matično ploščo namestite na distančnike in poravnajte luknje za vijake.
3. Matično ploščo pritrdite s priloženimi vijaki.

4.3 Namestitev napajalne enote (PSU).

1. Position the PSU in the dedicated compartment at the bottom rear of the case.
2. Ensure the PSU fan faces downwards (if the case has a bottom vent) or upwards.
3. Secure the PSU to the case with the provided screws from the rear.

Slika 2: Zadaj view of the Xigmatek Venom X RGB case, illustrating the power supply mounting bracket at the bottom, seven expansion slots, and the exhaust fan area.

4.4 Namestitev pogona za shranjevanje (HDD/SSD)

The case supports multiple storage drives. Refer to the internal layout for specific drive bay locations.

• 3.5-palčni trdi diski: Install into the drive cages located beneath the PSU shroud.
• 2.5-palčni SSD-ji: Mount onto the dedicated SSD trays behind the motherboard tray or within the drive cages.

Slika 3: Notranji view from the right side of the Xigmatek Venom X RGB case, revealing ample space for cable management and dedicated mounting points for 2.5-inch SSDs behind the motherboard tray.

4.5 Namestitev grafične kartice in razširitvene kartice

1. Z zadnje strani ohišja odstranite potrebne pokrove razširitvenih rež.
2. Vstavite grafično kartico ali druge razširitvene kartice v reže PCIe na matični plošči.
3. Kartice pritrdite z vijaki.

4.6 Front Panel I/O and RGB Connections

Connect the front panel cables (USB, audio, power, reset, LED) to the corresponding headers on your motherboard. Connect the RGB fan cables to the integrated RGB controller or directly to your motherboard's RGB header if supported.

5. Navodila za uporabo

5.1 Vklop

After all components are installed and cables are connected, plug the power cable into the PSU and a wall outlet. Press the power button on the front panel to start your system.

5.2 Nadzor osvetlitve RGB

The Xigmatek Venom X RGB case features integrated RGB lighting. Control methods may vary:

• Gumb na sprednji plošči: If available, a dedicated button on the front I/O panel can cycle through various RGB modes and colors.
• Programska oprema matične plošče: If the RGB controller is connected to a compatible motherboard header, you can control lighting effects via your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion).

6. Vzdrževanje

Redno vzdrževanje pomaga zagotoviti optimalno delovanje in dolgo življenjsko dobo komponent vašega računalnika.

6.1 Čiščenje filtrov za prah

The Xigmatek Venom X RGB case includes removable dust filters to prevent dust buildup. Regularly clean these filters to maintain airflow.

1. Locate the dust filters (e.g., top, front, bottom).
2. Nežno odstranite filtre.
3. Clean them with a soft brush or rinse with water (ensure they are completely dry before reinstallation).
4. Reattach the filters.

Slika 4: Zgornji del view of the Xigmatek Venom X RGB case, demonstrating the removable magnetic dust filter for easy cleaning and improved airflow maintenance.

6.2 Čiščenje notranjosti

Periodically clean the interior of the case to remove accumulated dust from components.

• Pred čiščenjem odklopite napajanje.
• Use compressed air to blow dust out of fans, heatsinks, and other components.
• Wipe down interior surfaces with a microfiber cloth.

7. Odpravljanje težav

Ta razdelek obravnava pogoste težave, na katere lahko naletite.

8. Specifikacije

9. Informacije o garanciji

The Xigmatek Venom X RGB PC Case comes with a 2-letna garancija proizvajalca from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, modification, or unauthorized repair.

Za garancijske zahtevke shranite dokazilo o nakupu.

10. Podpora strankam

For technical assistance, warranty claims, or further inquiries, please contact Xigmatek customer support through their official webspletno mesto ali prodajalec, kjer je bil izdelek kupljen.

Official Xigmatek Webspletno mesto: www.xigmatek.com