Uporabniški priročnik za udarni vijačnik Beta 1972/18

1. Izdelek je končanview

The Beta 1972/18 is an ultra-compact 18V brushless impact driver designed for professional use. It features a digital motor for enhanced performance, offering more power, reduced consumption, and precise power dosage.

• Brezkrtačni digitalni motor: Provides increased power and efficiency.
• Visok navor: Up to 75 Nm for demanding applications.
• Spremenljiva hitrost: Up to 2100 RPM for versatile drilling and driving.
• LED Front Lighting: Osvetljuje delovno območje za boljšo vidljivost.
• Zaščita baterije: Triple battery self-protection against overload and cell power differences.

Figure 1.1: The Beta 1972/18 Impact Driver, showcasinzaradi svoje kompaktne zasnove in ergonomskega ročaja.

2. Vključene komponente

Your Beta 1972/18 Impact Driver package includes the following items:

• Beta 1972/18 Impact Driver
• 2 x 5 Ah litij-ionski bateriji
• Quick Charger (80 minutes charging time)
• Hard Case for storage and transport
• Belt Clip (right/left mountable)

Figure 2.1: All components of the Beta 1972/18 kit neatly organized within the durable hard case.

3. Nastavitev in montaža

3.1 Polnjenje baterije

1. Connect the quick charger to a suitable power outlet.
2. Slide the 5Ah Lithium-Ion battery onto the charger until it clicks into place.
3. Popolno polnjenje traja približno 80 minut. Polnilnik bo pokazal, kdaj je polnjenje končano.
4. Ko je baterija napolnjena, jo odstranite iz polnilnika.

3.2 Namestitev baterije

• Align the charged battery with the base of the impact driver.
• Slide the battery firmly into the tool until it locks securely.
• To remove, press the battery release buttons on the sides and slide the battery out.

3.3 Pritrjevanje sponke za pas

The belt clip can be attached to either the right or left side of the tool for convenient carrying.

1. Locate the screw hole on the side of the tool where you wish to attach the clip.
2. Align the belt clip with the hole and secure it with the provided screw.

4. Navodila za uporabo

4.1 Vklop/izklop in nadzor hitrosti

• To power on the tool, press the trigger switch. The LED front light will illuminate.
• Za izklop spustite sprožilno stikalo.
• The tool features a variable speed trigger. Pressing the trigger further increases the speed up to 2100 RPM.
• Use the speed selector switch (if present, typically near the chuck) to choose between two speed ranges for different applications.

4.2 Nastavitev navora

The torque collar allows you to adjust the amount of torque applied, preventing overtightening or stripping screws. Rotate the collar to select the desired torque setting, up to 75 Nm.

4.3 Drilling and Driving

1. Insert the appropriate drill bit or driver bit into the chuck. Tighten the chuck securely.
2. Select the desired speed and torque setting.
3. Orodje trdno namestite ob obdelovanec.
4. Press the trigger to begin drilling or driving. Apply steady, even pressure.
5. For drilling into steel, the maximum recommended diameter is 13 mm. For wood, it is 45 mm.

Figure 4.1: Demonstrating the Beta 1972/18 in action, drilling into a wooden surface.

Figure 4.2: The compact design allows for use in confined spaces, such as under a car hood.

5. Vzdrževanje

5.1 Čiščenje

• Pred čiščenjem vedno odklopite baterijo.
• Orodje obrišite s čisto krpoamp krpo. Ne uporabljajte močnih kemikalij ali abrazivnih čistil.
• Keep ventilation openings clear of dust and debris. Use compressed air if necessary.

5.2 Nega in shranjevanje baterije

• Baterije shranjujte na hladnem in suhem mestu, stran od neposredne sončne svetlobe in ekstremnih temperatur.
• Za dolgotrajno shranjevanje napolnite baterije do približno 50 % kapacitete.
• Baterij ne shranjujte v izpraznjenem stanju, da preprečite poškodbe.

5.3 Splošno vzdrževanje

• Regularly inspect the chuck for wear and tear.
• Check the power cord of the charger for any damage.
• Prepričajte se, da so vsi vijaki in pritrdilni elementi na orodju trdno priviti.

6. Odpravljanje težav

7. Specifikacije

8. Garancija in podpora

The Beta 1972/18 Impact Driver comes with a 3-letna garancija, kar zagotavlja brezskrbnost glede njegove kakovosti in delovanja.

Beta Tools is a leading company in Italy for the design and production of professional work tools. They maintain a strong presence with three production facilities in Italy, demonstrating their commitment to quality and customer satisfaction.

For technical assistance, warranty claims, or any product-related inquiries, please refer to the contact information provided in your product packaging or visit the official Beta Tools webspletnega mesta. Račun shranite kot dokazilo o nakupu za namene garancije.

Za več informacij lahko obiščete Beta Brand Page on Amazon.