Diyeeni PCIE to DB25

Uporabniški priročnik za razširitveno kartico Diyeeni PCIE v DB25 LPT za vzporedna vrata

Model: PCIE to DB25

1. Izdelek je končanview

The Diyeeni PCIE to DB25 LPT Parallel Port Expansion Card is designed to add a single parallel port to your computer system via a PCI Express slot. This card enables connectivity with various parallel devices, including printers, programmers, and scanners, that utilize the IEEE 1284 printing protocol. It supports a wide range of operating systems, ensuring broad compatibility for legacy hardware integration.

Diyeeni PCIE to DB25 LPT Parallel Port Expansion Card with low-profile nosilec

Slika 1.1: The Diyeeni PCIE to DB25 LPT Parallel Port Expansion Card, showing the DB25 connector and the PCI Express interface, alongside the included low-profile nosilec.

2. Vsebina paketa

  • 1 x Diyeeni PCIE to DB25 LPT Parallel Port Expansion Card
  • 1 x Nizka profile Bracket (Cover Board)
  • 1 x Driver Mini-CD (may vary by package)

3. Nastavitev in namestitev

3.1 Namestitev strojne opreme

  1. Ugasniti: Prepričajte se, da je računalnik popolnoma izklopljen in odklopljen iz vira napajanja.
  2. Odprt primer: Open your computer case to access the motherboard's PCI Express slots.
  3. Izberite režo: Locate an available PCI Express x1, x4, x8, or x16 slot. The card is compatible with any of these slot types.
  4. PCIE card installed in a PCI Express slot

    Slika 3.1: The expansion card designed for PCI Express x1 slots, compatible with various PCIe slot sizes.

  5. Prepoznajte komponente: Familiarize yourself with the card's components before installation.
  6. Labeled image showing PCI-E interface and DB25 LPT parallel port

    Slika 3.2: Key components of the card, including the PCI-E interface and the DB25 LPT parallel port.

  7. Namestitev kartice: Carefully align the card with the chosen PCI Express slot and press it firmly until it is securely seated.
  8. Varna kartica: Secure the card with a screw or retention clip, depending on your computer case design.
  9. Low-Profile Nosilec (neobvezno): If installing in a small form factor PC, replace the standard bracket with the included low-profile bracket. To do this, remove the two screws holding the standard bracket, detach it, and attach the low-profile nosilec z istimi vijaki.
  10. Vrh view of the PCIE card with the DB25 port

    Slika 3.3: Vrh view of the card, illustrating the DB25 port and the PCI Express connector.

  11. Zapri primer: Close your computer case and reconnect the power source.

3.2 Namestitev gonilnika

After hardware installation, you will need to install the necessary drivers for the operating system to recognize and utilize the parallel port.

  • Windows Operating Systems (DOS, 2000, XP, Vista, 7, 8, Server 2003-2008, 32/64-bit):
    1. Insert the provided mini-CD into your computer's CD/DVD drive.
    2. Navigate to the appropriate driver folder for your operating system version.
    3. Run the setup executable or follow the instructions to manually install the driver via Device Manager.
    4. If a CD/DVD drive is unavailable, check the manufacturer's webstran za prenos gonilnikov.
  • Linux & OS/X 10.5 and other operating systems:

    Many Linux distributions and OS/X 10.5 may automatically detect and install generic drivers. If not, refer to the instructions on the mini-CD or the manufacturer's website for specific Linux/OS/X driver installation procedures.

4. Navodila za uporabo

Once the card is installed and drivers are in place, the parallel port will be available for use by your operating system and applications.

  1. Priključite napravo: Connect your parallel device (e.g., printer, programmer, scanner) to the DB25 LPT port on the expansion card.
  2. Close-up of DB25 LPT parallel port with supported operating systems listed

    Slika 4.1: Podrobno view of the DB25 LPT parallel port, highlighting its compatibility with various operating systems.

  3. Konfigurirajte programsko opremo: Configure your application or operating system settings to use the newly installed parallel port. The port will typically be assigned as LPT1, LPT2, or LPT3, depending on system configuration.
  4. Preverite funkcionalnost: Test the connected device to ensure proper communication and operation.

5. Vzdrževanje

The Diyeeni PCIE to DB25 LPT Parallel Port Expansion Card requires minimal maintenance.

  • Keep the computer's interior clean and free of dust to prevent overheating and ensure optimal performance of all components, including the expansion card.
  • Ensure the card is securely seated in its PCI Express slot.
  • Avoid physical damage to the card or its connectors.

6. Odpravljanje težav

  • Kartica ni bila zaznana:
    • Ensure the card is fully seated in the PCI Express slot.
    • Verify that the PCI Express slot is functional. Try another slot if available.
    • Check your computer's BIOS/UEFI settings to ensure PCI Express slots are enabled.
  • Težave z namestitvijo gonilnikov:
    • If using the mini-CD, ensure your CD/DVD drive can read the disc without errors.
    • For Windows 10/11, if the provided drivers do not work, try searching for updated drivers on the chip manufacturer's website (e.g., WCH CH382L or similar, if identifiable).
    • In Device Manager, check for any devices with a yellow exclamation mark and attempt to update drivers manually.
  • Device Not Communicating:
    • Verify that the parallel device is correctly connected to the DB25 port.
    • Ensure the parallel device is powered on and functioning correctly.
    • Check the software configuration to ensure it is pointing to the correct LPT port assigned by the operating system.
    • Some older parallel devices or security dongles may have specific timing requirements or driver dependencies that might not be fully compatible with all PCI Express parallel port adapters.
  • LinuxCNC Compatibility:

    Some users have reported that newer revisions of this card may register as a serial port rather than a parallel port in Linux, which can affect compatibility with applications like LinuxCNC that specifically require a true parallel port for non-Mesa setups. Verify the card's detection in your Linux environment using commands like lspci -v.

7. Specifikacije

FunkcijaPodrobnost
ZnamkaDijeeni
Številka modelaPCIE to DB25
Strojni vmesnikPCI Express x1 (compatible with x4, x8, x16 slots)
PCIe SpecificationRevision 1.1 Compliant
Parallel Port TypeDB25 LPT
Parallel Protocol SupportBuilt-in SPP, EPP, ECP compatible IEEE 1284
V/I krmilnikHigh-speed I/O controller (16C550C or compatible UART)
Medpomnilnik FIFOBuilt-in 16 Byte FIFO
Bus Design32-bit bus design, supporting PCI 2.1 specification
Podprti operacijski sistemiDOS, Windows 95/98/98SE/2000/ME/NT4.0/XP/Vista/7/8 (32/64-bit), Server 2003-2008 (32/64-bit), Linux, OS/X 10.5
Dimenzije (DxŠxV)4.72 x 3.35 x 0.79 palcev (12 x 8.5 x 2 cm)
Teža predmeta2.82 unč (0.08 kilograma)
Physical dimensions of the Diyeeni PCIE to DB25 LPT Parallel Port Expansion Card

Slika 7.1: Physical dimensions of the expansion card, showing length, width, and height measurements.

8. Garancija in podpora

For information regarding product warranty, please refer to the documentation provided with your purchase or contact the seller directly. Technical support may be available through the product manufacturer, Diyeeni.

© 2025 Diyeeni. Vse pravice pridržane.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.