Ohaus CR5200 Compass Series Portable Balance User Manual

1. Uvod

This manual provides instructions for the proper setup, operation, and maintenance of your Ohaus CR5200 Compass Series Portable Balance. Please read this manual thoroughly before using the balance to ensure correct operation and to prevent damage.

The Ohaus CR5200 is a portable digital balance designed for accurate weighing with a capacity of 5200 grams and a readability of 1 gram. It supports multiple weighing units including grams (g), ounces (oz), pounds:ounces (lb:oz), troy ounces (ozt), and pennyweights (dwt).

Slika 1.1: Zgoraj view of the Ohaus CR5200 Compass Series Portable Balance, showing the display and control buttons.

2. Varnostne informacije

• Operate the balance on a stable, level surface free from vibrations and drafts.
• Tehtnice ne izpostavljajte ekstremnim temperaturam, vlagi ali neposredni sončni svetlobi.
• Do not overload the balance beyond its maximum capacity of 5200 grams.
• Tehtnico vzdržujte čisto in brez prahu ter umazanije.
• Use only the specified power source (3 AA batteries or compatible AC adapter).

3. Nastavitev

3.1 Razpakiranje

Carefully remove the balance from its packaging. Inspect the balance for any signs of damage. Retain the packaging for future transport or storage.

3.2 Powering the Balance

The Ohaus CR5200 can be powered by three AA alkaline batteries or an external AC adapter (not included, but compatible with the side power port).

Namestitev baterije:

1. Locate the battery compartment on the underside of the balance.
2. Odprite pokrov prostora za baterije.
3. Vstavite tri alkalne baterije tipa AA in pri tem pazite na pravilno polarnost (+/-).
4. Trdno zaprite pokrov prostora za baterije.

Slika 3.1: Spodnja stran view of the balance with the battery compartment open, showing three AA batteries installed.

Priključek za zunanje napajanje:

If using an AC adapter, connect it to the power input port located on the side of the balance. Ensure the adapter meets the specified voltage and current requirements (e.g., 12V 0.5A).

Slika 3.2: Stran view of the balance, highlighting the external power input port.

3.3 Namestitev

Place the balance on a firm, level, and stable surface. Avoid locations near air vents, windows, or equipment that generates vibrations or electromagnetic interference.

4. Navodila za uporabo

4.1 Vklop/izklop

• Za vklop: Pritisnite [ON/OFF] button. The display will show a self-test sequence and then settle at 0.0 g.
• Za izklop: Pritisnite in držite [ON/OFF] gumb, dokler se zaslon ne izklopi.

4.2 Selecting Weighing Units

The balance supports multiple weighing units: grams (g), ounces (oz), pounds:ounces (lb:oz), troy ounces (ozt), and pennyweights (dwt).

• To change the weighing unit: Press the [ENOTA] button (often labeled with 'g' and an arrow). Each press cycles through the available units.

4.3 Funkcija tare

The tare function allows you to zero out the weight of a container, so only the weight of the contents is measured.

1. Place the empty container on the weighing pan. The display will show its weight.
2. Pritisnite [TARE/NIČ] button (often labeled with '→0←'). The display will reset to 0.0.
3. V posodo dodajte material, ki ga želite stehtati. Na zaslonu se bo prikazala neto teža materiala.

Image 4.1: The balance with an empty bowl on the weighing pan, ready for the tare function.

4.4 Osnovno tehtanje

1. Ensure the balance is powered on and the display shows 0.0 in the desired weighing unit.
2. Predmet, ki ga želite stehtati, previdno postavite na sredino tehtalne plošče.
3. Wait for the display to stabilize. The stable weight will be shown.
4. Predmet odstranite iz ponve.

4.5 External Calibration

The Ohaus CR5200 features external calibration. This process requires a known calibration weight (not included) to ensure accuracy. Refer to the full Ohaus CR Series manual for detailed calibration procedures specific to your model.

Image 4.2: The balance with a cylindrical calibration weight placed on the weighing pan.

5. Vzdrževanje

5.1 Čiščenje

• Zunanjost tehtnice obrišite z mehko krpoamp krpo. Ne uporabljajte abrazivnih čistil ali topil.
• Ensure no liquids enter the balance housing or display.
• Keep the weighing pan clean to ensure accurate readings.

5.2 Zamenjava baterije

When the battery indicator appears on the display, replace the three AA alkaline batteries as described in Section 3.2.

5.3 Shranjevanje

When not in use for extended periods, remove the batteries to prevent leakage. Store the balance in a dry, dust-free environment. The Ohaus CR5200 is designed for portability and can be stored in a protective case (if available).

Image 5.1: The Ohaus CR5200 balance shown alongside its protective carrying case.

6. Odpravljanje težav

7. Specifikacije

8. Garancija in podpora

For warranty information, technical support, or service inquiries, please contact Ohaus customer service or visit the official Ohaus webspletno mesto. Shranite račun kot dokazilo o nakupu.