Suptek MD6SB Dual Monitor Arm Pole Mount Instruction Manual

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Suptek MD6SB Dual Monitor Arm. This product is designed to mount two monitors to a pole, optimizing your workspace and improving viewing ergonomics. Please read this manual thoroughly before installation and keep it for future reference.

2. Izdelek je končanview

2.1. Ključne značilnosti

• Montaža na drog: Designed for secure attachment to poles with a diameter of 35mm.
• Podpora za dvojni monitor: Accommodates two monitors simultaneously.
• Široka združljivost: Supports monitors from 13 to 27 inches.
• Visoka nosilnost: Each arm can support up to 10kg (22 lbs).
• Skladnost z VESA: Združljivo z montažnimi vzorci VESA 75x75 mm in 100x100 mm.
• Prilagoditev več kotov: Features ±90° tilt, ±90° swivel, and 360° rotation for optimal viewing kotov.
• Upravljanje kablov: Integrated cable clips help organize and protect monitor cables.
• Prihranek prostora: Frees up desk space by elevating monitors.

2.2. Vsebina paketa

Pred začetkom namestitve preverite, ali so prisotne vse komponente:

• Plošča VESA x 2
• Arm Cord Bushing x 4
• Inbusni ključ x 1
• Rotating Arm x 1 (Main Assembly)
• M4 x 30 mm vijaki x 8
• M4 x 12 mm vijaki x 8
• Distančniki x 8
• Red Washers x 8
• Black Washers x 8
• Matice x 2

Figure 1: Package Contents. Includes VESA plates, arm assembly, various screws, washers, spacers, nuts, and a hex wrench.

3. Varnostne informacije

• Do not exceed the maximum load capacity of 10kg (22 lbs) per arm.
• Ensure the mounting pole is stable and capable of supporting the combined weight of the arm and monitors.
• Always use the provided hardware. If your monitor requires different screws, consult the monitor's manual.
• Perform installation with at least two people to prevent injury or damage.
• Med namestitvijo hranite otroke in hišne ljubljenčke proč.
• Vse vijake trdno privijte, vendar jih ne premočno privijte, da preprečite strganje navoja.
• Regularly check the arm and monitor connections for security.

4. Nastavitev in namestitev

4.1. Preverjanje pred namestitvijo

• Confirm your monitor's weight and size are within the specified limits (13-27 inches, max 10kg per arm).
• Verify your monitor has VESA 75x75mm or 100x100mm mounting holes.
• Ensure your pole has a diameter of 35mm.

4.2. Attaching the Arm to the Pole

1. Loosen the screws on the pole clamp of the rotating arm assembly.
2. Position the rotating arm assembly at the desired height on the 35mm diameter pole.
3. Tighten the screws on the pole clamp securely to fix the arm in place.

4.3. Pritrditev plošč VESA na monitorje

1. Monitor previdno položite z zaslonom navzdol na mehko, čisto površino.
2. Align a VESA plate with the mounting holes on the back of your monitor.
3. Use the appropriate M4 screws (M4 x 12mm or M4 x 30mm) and washers/spacers if needed, to secure the VESA plate to the monitor. Do not overtighten.
4. Ponovite za drugi monitor.

4.4. Mounting Monitors to the Arm

1. With assistance, carefully lift a monitor with the attached VESA plate.
2. Slide the VESA plate onto the VESA head of one arm until it clicks into place or is securely fastened with the locking mechanism (if present).
3. Ensure the monitor is firmly attached before releasing.
4. Repeat for the second monitor on the other arm.

Figure 2: Assembled Dual Monitor Arm. Shows the main arm structure with VESA plates ready for monitor attachment.

5. Navodila za uporabo

5.1. Prilagajanje položaja monitorja

The monitor arm allows for flexible adjustment to achieve optimal viewudobje.

• Nastavitev nagiba: Gently push or pull the top or bottom of the monitor to adjust the tilt angle by ±90°.
• Nastavitev vrtenja: Rotate the monitor left or right by ±90° at the arm joint.
• Vrtenje: Za preklapljanje med ležečo in pokončno orientacijo monitor zavrtite za 360°.
• Izteg/umik roke: Move the arm segments to extend or retract the monitors, adjusting the distance from your viewpoložaj.

Figure 3: Angle Adjustment. Shows how monitors can be tilted and swiveled.

Figure 4: 360° Monitor Rotation. Demonstrates switching between landscape and portrait modes.

5.2. Upravljanje kablov

Utilize the integrated cable clips along the arm to route and secure your monitor cables. This helps maintain a tidy workspace and prevents cable damage.

6. Vzdrževanje

• Redni pregledi: Periodically inspect all screws and connections to ensure they remain tight and secure.
• Čiščenje: Držalo monitorja očistite z mehko krpoamp krpo. Izogibajte se abrazivnim čistilom ali topilom, ki bi lahko poškodovala površino.
• Mazanje: No lubrication is typically required for the moving parts. If movement becomes stiff, contact support.

7. Odpravljanje težav

7.1. Monitor Sags or Does Not Hold Position

• Preverite težo: Ensure the monitor weight does not exceed 10kg per arm.
• Zategnite spoje: Use the provided hex wrench to tighten the tension screws at the arm joints and VESA head. Refer to the assembly diagrams for screw locations.

7.2. Arm is Loose on the Pole

• Tighten Pole Clamp: Ensure the screws on the pole clamp so popolnoma zategnjeni.
• Check Pole Diameter: Confirm the pole diameter is 35mm. If it's smaller, the arm may not secure properly.

7.3. Difficulty Attaching VESA Plate to Monitor

• Pravilni vijaki: Ensure you are using the correct M4 screws (12mm or 30mm) and spacers if necessary, to match your monitor's VESA mounting depth.

8. Specifikacije

Figure 5: Product Dimensions and VESA Compatibility. Illustrates overall arm length and VESA mounting hole patterns.

9. Garancija in podpora

9.1. Informacije o garanciji

This Suptek product comes with a enoletna garancija od datuma nakupa. Ta garancija pokriva napake v materialu in izdelavi pri normalni uporabi.

9.2. Podpora strankam

If you encounter any issues or have questions regarding your Suptek product within the warranty period, please contact us through the following steps:

1. Prijavite se v svoj račun Amazon.
2. Go to "Account Service" (or "Your Account").
3. Navigate to "Order History" (or "Your Orders").
4. Find your order for the Suptek MD6SB Dual Monitor Arm.
5. Click on the "Seller" link.
6. Select "Ask a question" to send a message to our support team.

Please include your order number in your message for faster service. Our team is committed to providing prompt and effective solutions to your concerns.