BFT Phobos BT A40 Automatic Double Swing Gate Operator User Manual

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of the BFT Phobos BT A40 automatic double swing gate operator. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Slika 1: Konecview of the BFT Phobos BT A40 Kit Components.

2. Varnostne informacije

Vedno upoštevajte naslednje varnostne ukrepe, da preprečite poškodbe ali škodo na opremi:

• Namestitev mora opraviti usposobljeno osebje v skladu z lokalnimi predpisi.
• Disconnect power before performing any maintenance or installation work.
• Med delovanjem vrat naj otroci in hišni ljubljenčki ne bodo v bližini.
• Do not operate the gate if any part is damaged or malfunctioning.
• Ensure all safety devices (photocells, emergency stop) are correctly installed and functioning.
• In case of power failure, use the provided emergency release keys to manually open the gate.

3. Priložene komponente

The BFT Phobos BT A40 kit typically includes the following components:

• 2 x BFT PHOBOS BT A40 electromechanical actuators with fixings.
• 1 x BFT THALIA LIGHT control panel with integrated radio receiver (memory for 63 manual transmitters).
• 1 x Control panel housing (hermetic).
• 3 x BFT MITTO B4 4-channel remote controls.
• 1 x BFT Radius LED BT A R1 flashing lamp z anteno.
• 1 x Pair of BFT Compacta A20-180 pivoting photocells (transmitter and receiver).
• 4 x Keys for emergency gate opening in case of power failure.
• Mounting brackets for posts and gate leaves.
• Various small parts and accessories for installation (e.g., nuts, bolts, seals).

Figure 2: Small Parts and Accessories.

4. Nastavitev in namestitev

This section outlines the general steps for installing the BFT Phobos BT A40 system. Professional installation is highly recommended.

4.1 Actuator Installation

Install the two BFT PHOBOS BT A40 electromechanical actuators on each gate leaf. Ensure the mounting brackets are securely fastened to both the gate post and the gate leaf. The maximum distance between the edge of the post and the hinge axis should be up to 8 cm.

Figure 3: BFT PHOBOS BT A40 Actuators and THALIA LIGHT Control Unit.

Figure 4: Mounting Brackets.

The magnetic limit switch system ensures maximum operating precision and very easy and quick adjustment. The integrated adjustable limit switch means there is no need to use bumpers screwed to the ground.

4.2 Control Panel Installation

Mount the BFT THALIA LIGHT control panel in its hermetic housing in a protected location, typically near the gate. Connect the actuators, power supply, and all safety devices to the control panel according to the wiring diagram provided in the full installation manual (not included in this summary).

4.3 Namestitev fotocelice

Install the BFT Compacta A20-180 pivoting photocells on opposite sides of the gate opening, ensuring they are aligned. These photocells provide a safety barrier, preventing the gate from closing if an obstruction is detected.

Figure 5: BFT Compacta A20-180 Pivoting Photocell Pair.

4.4 Flashing Lamp Namestitev

Mount the BFT Radius LED BT A R1 flashing lamp in a visible location. This lamp provides a visual warning when the gate is in motion.

Figure 6: BFT Radius LED BT A R1 Flashing Lamp.

5. Navodila za uporabo

The BFT Phobos BT A40 system is designed for automatic operation of double swing gates.

5.1 Delovanje daljinskega upravljalnika

Use the BFT MITTO B4 4-channel remote controls to operate the gate. Each button can be programmed for different functions (e.g., open/close both leaves, open/close single leaf, pedestrian access). Refer to the control panel manual for remote control programming instructions.

Figure 7: BFT MITTO B4 Remote Controls.

5.2 Samodejno delovanje

Once activated, the gate will open or close automatically. The D-TRACK technology ensures complete application safety by optimally selecting the necessary forces at each point of the automation's operation. The system will detect obstructions via the photocells and reverse or stop to prevent damage or injury.

5.3 Emergency Manual Release

In the event of a power failure, use the provided emergency keys to manually unlock and open the gate. Insert the key into the actuator's release mechanism and turn it as indicated in the actuator's specific manual.

6. Vzdrževanje

Regular maintenance ensures the longevity and reliable operation of your BFT gate operator.

• Mesečno: Check the gate's movement for any unusual noises or resistance. Ensure the photocells are clean and unobstructed. Test the safety features.
• Četrtletno: Inspect all mounting points and fasteners for tightness. Check the condition of the actuator's screw nut; the modernized design (deeper screw nut) reduces the possibility of accidental contamination of the mechanism, but regular inspection is still advised.
• Letno: Have the system inspected by a qualified technician.
• Območje okoli vrat naj bo čisto od odpadkov in rastlinja.

7. Odpravljanje težav

Ta razdelek obravnava pogoste težave, na katere lahko naletite. Za zapletene težave se obrnite na usposobljenega tehnika.

8. Specifikacije

Key technical specifications for the BFT Phobos BT A40 system:

• Model: Phobos BT A40
• Proizvajalec: BFT
• Tip aktuatorja: 24V Electromechanical irreversible drive
• Največja dolžina vratnega krila: Up to 4 meters (13.1 ft) per leaf
• Največja teža vratnega krila: Up to 250 kg (551 lbs) per leaf
• Mere izdelka (D x Š x V): 26 x 18 x 14 cm (10.2 x 7.1 x 5.5 palca)
• Teža izdelka: 2.21 kg (4.87 lbs)
• barva: Srebrna
• referenčna številka: OGBBFTADB0037
• Številka modela artikla: 2611950

Figure 8: Actuator Dimensions (Phobos BT A40 relevant).

9. Garancija in podpora

Information regarding product warranty and availability of spare parts is not explicitly provided in this manual. Please refer to your purchase documentation or contact your BFT dealer for details on warranty coverage and spare parts availability.