A. O. Smith AO-US-200

A. O. Smith AO-US-200 2-Stage Sistem filtrov za vodo pod umivalnikom

Navodila za uporabo

Uvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your A. O. Smith AO-US-200 2-Stage Under Sink Water Filter System. Please read all instructions carefully before beginning installation or use to ensure proper function and safety. This system is designed to provide clean, filtered drinking water directly from a dedicated faucet.

Pomembne varnostne informacije

Always follow basic safety precautions when installing or maintaining this product to reduce the risk of fire, electric shock, or injury to persons. Keep this manual for future reference.

  • Pred namestitvijo izklopite glavni dovod vode.
  • Do not install the system where it will be exposed to freezing temperatures.
  • Prepričajte se, da so vse povezave varne, da preprečite puščanje.
  • Use only genuine A. O. Smith replacement filters.

Kaj je v škatli

Pred začetkom namestitve preverite, ali so prisotne vse komponente:

  • AO-US-200 Filter Unit
  • Pipa
  • Filter Cartridge Set (2 cartridges)
  • viličasti ključ
  • Cevke
  • 1/4" Brass Tee
  • Mounting Screws with Anchors
  • Faucet Installation Hardware (spacers, nuts, washers)
Diagram showing all components included in the AO Smith AO-US-200 water filter system box: filter unit, faucet, two filter cartridges, and a wrench.
Figure 1: Included Components of the AO-US-200 System

Specifikacije

Funkcija Podrobnost
Številka modela AO-US-200
Filtracija Stages 2-Stage Claryum Filtration
Življenjska doba filtra 6 months / 500 Gallons
Zmanjšanje onesnaženja Reduces up to 99% of 78 contaminants including Lead, PFAS, Chlorine, Mercury, Asbestos, Pharmaceuticals, Chloramine
Certifikati NSF/ANSI Standards 42, 53, and 401 (WQA Tested & Certified)
Hitrost pretoka 0.5 litra na minuto
Material Karbonski blok
Mere (pribl.) Višina: 9 cm (22.9 palca), širina: 8.25 cm (21 palca), globina: 4.25 cm (10.2 palca)
Diagram showing the dimensions of the AO Smith 2-stage water filter system, including height, width, and depth measurements.
Figure 2: System Dimensions

Nastavitev in namestitev

1. Kontrolni seznam pred namestitvijo

  • Potrebna orodja: Adjustable wrench, measuring tape, pencil, Phillips head screwdriver, hammer, variable speed drill with 7/32" bit, level.
  • Lokacija: Select a space under your sink that is at least 12 inches from the bottom of your cabinet and allows for easy access to a cold water supply line.
  • Namestitev pipe: The dedicated faucet may be mounted on the sink using an existing hole (e.g., for a sprayer nozzle or soap dispenser) or by drilling a new hole no more than 1/2 inch in diameter. Ensure the faucet's spout extends slightly past the edge of the sink. Opomba: Če je potrebno vrtanje, priporočamo, da uporabite pooblaščenega ali certificiranega strokovnjaka.

2. Connecting to Cold Water Supply

  1. Izklopite dovod hladne vode v umivalnik.
  2. Disconnect the cold water supply line from the shut-off valve.
  3. Attach the threaded end of the 1/4" brass tee to the cold water shut-off valve.
  4. Connect the cold water supply line to the top of the brass tee.
  5. Tighten all connections using an adjustable wrench.

3. Namestitev pipe

  1. Insert the faucet stem through the chosen hole in your sink.
  2. From underneath the sink, slide the faucet rubber washer, faucet washer, and faucet spacer onto the faucet stem.
  3. Secure the faucet with the faucet nut, tightening it with a wrench to ensure it is secure to the sink.

4. Mounting the Filter Unit

  1. Temporarily position the filter unit under the sink in your chosen location.
  2. S svinčnikom označite pritrdilne luknje.
  3. Drill pilot holes at the marked locations. If mounting into drywall, insert the provided drywall anchors.
  4. Mount the unit to the wall using the provided screws.
Diagram illustrating the DIY installation process for an under-sink water filter system, showing connections to the cold water line and faucet.
Figure 3: Do-It-Yourself Installation Overview
An under-counter view of the installed AO Smith water filtration system, showing the filter unit and associated plumbing beneath a kitchen sink.
Figure 4: Under-Counter Installation Example

5. Povezovalne cevi

  1. Connect one end of the provided tubing to the open port on the brass tee. Ensure the plastic tube insert and brass nut are correctly installed for a secure, leak-free connection.
  2. Insert the other end of this tubing completely into the 'IN' port of the filter unit.
  3. Connect another piece of tubing to the faucet stem. Ensure the chrome nut and plastic collar are correctly installed.
  4. Insert the other end of this tubing completely into the 'OUT' port of the filter unit.

6. Initial System Flush

  1. Počasi odprite dovod hladne vode.
  2. Open the dedicated filtered water faucet and allow water to run for 10 minutes to flush the system. This removes air and carbon fines.
  3. Check all connections for leaks. Tighten if necessary.

Video 1: Official A. O. Smith AO-US-200 Installation Guide. This video provides a visual walkthrough of the installation process for the 2-stage under sink water filter system.

Upravljanje vašega sistema

Once installed and flushed, your A. O. Smith AO-US-200 system is ready for use. Simply open the dedicated filtered water faucet to dispense clean, filtered water. The system filters water at a rate of 0.5 gallons per minute, suitable for families of 1 to 4 people.

Maintenance: Filter Replacement

For optimal performance, replace your filter cartridges every 6 months or after 500 gallons of use, whichever comes first. The system is designed for easy, tool-free filter replacement.

Tehnologija filtracije

Diagram illustrating how the 2-stage Claryum filtration system works, showing water flowing through two filter cartridges.
Figure 5: How the 2-Stage Claryum Filtration Works
Diagram detailing the Claryum filtration technology, showing activated carbon, catalytic carbon, ion-exchange, and absolute sub-micron mechanical filtration layers.
Figure 6: Claryum Filtration Technology Details

Koraki za zamenjavo filtra

  1. Izklopite dovod hladne vode v sistem.
  2. Open the filtered water faucet to relieve pressure and drain any remaining water.
  3. Twist the old filter cartridges counter-clockwise to remove them from the unit housing.
  4. Discard the old filters.
  5. Insert new filter cartridges into the unit housing, aligning the connection points.
  6. Push the new filters up and twist clockwise until they are securely locked into place.
  7. Počasi odprite dovod hladne vode.
  8. Open the filtered water faucet and allow water to run for 10 minutes to flush the new filters.
  9. Preverite morebitno puščanje.
Pro tips for easy installation and filter replacement, including advice on not over-tightening sumps, inserting tubing completely, wetting tube ends, and noting that the system does not reduce TDS.
Figure 7: Pro Tips for Installation and Filter Replacement

Odpravljanje težav

Težava Možen vzrok rešitev
Puščanja na priključkih Loose fittings, missing O-rings, improper tubing insertion. Ensure all nuts are tightened, check for properly seated O-rings, re-insert tubing fully into quick-connect fittings. Using plumber's tape on threaded connections can help.
Nizek pretok vode iz pipe Clogged filters, kinked tubing, low incoming water pressure. Replace filters if they are past their service life. Check tubing for kinks. Verify adequate household water pressure.
Neprijeten okus/vonj Filters are exhausted, initial carbon fines not fully flushed. Replace filters. Flush the system for an extended period (e.g., 15-20 minutes) after filter replacement.
Filter change indicator not working Battery needs replacement. Replace the battery in the filter unit's indicator.

Informacije o garanciji

A. O. Smith provides a limited warranty for this product. Please refer to the warranty card included with your purchase or visit the official A. O. Smith webZa podrobne pogoje in določila obiščite spletno mesto. Shranite dokazilo o nakupu za uveljavljanje garancije.

Podpora uporabnikom

If you have any questions, require assistance with installation, or need to order replacement parts, please contact A. O. Smith Customer Support:

  • Webspletno mesto: www.aosmith.com
  • telefon: Refer to your product packaging or the A. O. Smith webspletno mesto za najnovejše kontaktne številke.

© 2024 A. O. Smith. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.