Uvod
The Armor3 "ReadyHub" 3-Port HD Switcher allows you to connect up to three HD game consoles or other HD devices to a single HD display, such as an HDTV or monitor. This device simplifies your setup by eliminating the need to constantly swap cables, providing a convenient way to switch between your connected devices with the push of a button or via the included remote control. It supports 4K resolution, ensuring high-quality video output.
Vsebina paketa
Prosimo, preverite, ali so v vašem paketu vsi elementi:
- Armor3 "ReadyHub" 3-Port HD Switcher
- Daljinski upravljalnik
- Power Adapter (typically included for active switchers)
Note: HD cables are not included and must be purchased separately.
Image: The Armor3 ReadyHub 3-Port HD Switcher shown in its retail packaging, highlighting its 4K and 3D compatibility.
Navodila za namestitev
Follow these steps to connect your Armor3 "ReadyHub" HD Switcher:
- Priključite vhodne naprave: Plug your HD game consoles (e.g., Nintendo Switch, PS4, Xbox One, Wii U, Xbox 360) or other HD devices into the "INPUT 1", "INPUT 2", and "INPUT 3" ports on the HD Switcher using HD cables.
- Poveži se s prikazom: Connect one end of an HD cable to the "OUTPUT" port on the HD Switcher and the other end to an available HD input port on your HDTV or display.
- Priključite napajanje: Plug the included power adapter into the "DC 5V" port on the HD Switcher, then plug the adapter into a standard electrical outlet. The power indicator light on the switcher should illuminate.
- Izberite vnos: Turn on your HD display and select the corresponding HD input channel that the switcher is connected to.
Image: The Armor3 ReadyHub HD Switcher with HD cables connected to its input and output ports, alongside its remote control. This illustrates a typical setup configuration.
Navodila za uporabo
Once connected, you can easily switch between your devices:
- Ročno preklapljanje: Press the "SELECT" button on the front of the HD Switcher to cycle through the connected input devices (Input 1, Input 2, Input 3). The corresponding LED indicator will light up to show the active input.
- Preklapljanje daljinskega upravljalnika: Use the included remote control to directly select the desired input. Press the "1", "2", or "3" button on the remote to switch to Input 1, Input 2, or Input 3 respectively.
Ensure that the device you wish to display is powered on for the switcher to detect its signal.
Vzdrževanje
To ensure the longevity and optimal performance of your Armor3 "ReadyHub" HD Switcher:
- Čiščenje: Za čiščenje zunanjosti naprave uporabite mehko, suho krpo. Ne uporabljajte tekočih čistil ali abrazivnih materialov.
- Shranjevanje: Store the switcher in a cool, dry place away from direct sunlight and extreme temperatures.
- Ravnanje: Izogibajte se padcem naprave in je ne izpostavljajte močnim udarcem.
Odpravljanje težav
If you encounter issues with your HD Switcher, please refer to the following common problems and solutions:
| Težava | rešitev |
|---|---|
| Na zaslonu ni signala. |
|
| Daljinski upravljalnik ne deluje. |
|
| Indikator napajanja ne sveti. |
|
Specifikacije
- Model: M07385
- Vhodi: 3 x HD (HDMI)
- Izhod: 1 x HD (HDMI)
- Podprte ločljivosti: Do 4K
- Združljivost: Nintendo Switch, PlayStation 4, Xbox One, Nintendo Wii U, Xbox 360, and other HD devices.
- Dimenzije: 4.72 x 1.57 x 4.75 palcev (12 x 4 x 12.06 cm)
- Teža: 3.2 unče (90.7 gramov)
Garancija in podpora
For warranty information or technical support, please contact Armor3 customer service. Details can typically be found on the product packaging or the official Armor3 webspletnega mesta. Prosimo, shranite dokazilo o nakupu za uveljavljanje garancije.
Za dodatno pomoč lahko obiščete proizvajalčevo webspletno mesto ali se obrnite na njihove kanale za podporo.