Anderic RRLC16.2

Anderic RRLC16.2 Universal Replacement Remote Control for Sharp Roku TVs

Model: RRLC16.2 | Brand: Anderic

Uvod

This manual provides comprehensive instructions for the Anderic RRLC16.2 Universal Replacement Remote Control. Designed specifically for Sharp Roku TVs, this remote offers immediate functionality for compatible Sharp models without requiring any initial programming. It features dedicated shortcut keys for popular streaming services and a secure battery compartment for enhanced durability and safety. For other Roku TV brands or Roku Boxes, programming may be required.

Lastnosti izdelka

  • Fully Universal: Compatible with all Roku TVs. Note: Not for Roku Streaming Sticks.
  • Uncompromised Quality: Engineered for superior performance and durability compared to original remotes.
  • Delovanje brez napora: Works identically to the original remote for Sharp Roku TVs without complex setup. (Some shortcut keys may differ).
  • Quick Access to Streaming Services: Dedicated shortcut keys for NETFLIX, AMAZON, RDIO, and MGO provide instant access to these streaming platforms.
  • Varen predal za baterije: Includes an optional screw to secure the battery cover, preventing accidental opening.

Nastavitev

1. Namestitev baterij

The Anderic RRLC16.2 remote requires two AAA batteries (not included). To install:

  1. Poiščite predal za baterije na zadnji strani daljinskega upravljalnika.
  2. Pokrov baterije potisnite navzdol, da ga odprete.
  3. Vstavite dve bateriji AAA in pazite na pravilno polarnost (+ in -).
  4. Replace the battery cover by sliding it upwards until it clicks into place. For added security, use the optional screw to fasten the cover.
Nazaj view of Anderic RRLC16.2 remote control showing the battery compartment with an optional screw for securing the cover.

Image: Back of the remote control, highlighting the battery compartment and optional screw.

2. Initial Use (Sharp Roku TVs)

For Sharp Roku TV models (e.g., LC-43LB371U, LC-43LB371UA, LC-43LB371UB, LC-50LB371U), the Anderic RRLC16.2 remote is pre-programmed and ready to use immediately after battery installation. No additional setup is required.

3. Programming for Other Roku TVs or Roku Boxes

If you are using the remote with other Roku TV brands (Hisense, Insignia, TCL, Hitachi) or a Roku Box, programming may be necessary. Refer to the "Programming Instructions (via Learning)" section below for detailed steps.

Navodila za uporabo

Spredaj view of Anderic RRLC16.2 remote control showing all buttons including power, directional pad, OK, back, home, volume, mute, and streaming service shortcuts.

Slika: spredaj view of the Anderic RRLC16.2 remote control.

  • Gumb za prižig (): Located at the top, press to turn your TV on or off.
  • Directional Pad (Purple Arrows) & OK Button: Use the arrow buttons to navigate menus and select options. Press the central "OK" button to confirm selections.
  • Gumb za nazaj (): Vrne se na prejšnji zaslon ali meni.
  • Gumb Domov (): Vrne se na začetni zaslon Rokuja.
  • Volume & Mute Buttons: Located on the side of the remote. Use the volume up/down buttons to adjust audio levels and the mute button to silence audio.
  • Predvajanje/pavza, previjanje nazaj, hitro previjanje naprej: Standard media control buttons for content playback.
  • Tipke za bližnjice: Dedicated buttons for NETFLIX, AMAZON, RDIO, and MGO provide instant access to these streaming platforms.

Združljivost

The Anderic RRLC16.2 remote control is designed for broad compatibility with Roku TVs. Please review the compatibility details below:

  • Pre-Programmed for Sharp Roku TV Models: LC-43LB371U, LC-43LB371UA, LC-43LB371UB, LC-50LB371U.
  • Compatible with Other Roku TV Brands (Requires Programming): Hisense, Insignia, TCL, Hitachi.
  • Compatible with Roku Box (Requires Programming).
  • NOT Compatible with Roku Streaming Sticks.
Compatibility chart for Anderic RR-LC-16.2 remote, showing checkmarks for Sharp Roku TV models and Roku Box (with note for programming), and an X for Roku Stick.

Image: Anderic RR-LC-16.2 Compatibility Chart.

Programming Instructions (via Learning)

This remote can be programmed to work with any TV via the learning method. This method does not require codes. Note: All keys on the RR-LC-16.2 may be learned. Original remote is needed.

  1. Pritisnite in držite (Domov) in (Back) keys simultaneously for about 3 seconds. The indicator light will light up and remain on. Release the keys.
  2. Press and release the key to be learned. The indicator light will flash slowly.
  3. Point the original remote control head-to-head with the RR-LC-16.2, making sure the IR (infrared) light bulb at the top edge of the remote aligns directly with the lens on the front of the RR-LC-16.2, with a distance of about 3cm.
  4. Press and hold the key on the original remote that you want the RR-LC-16.2 to learn. The indicator light will flash 3 times to confirm and then remain on, waiting for the next entry.
  5. Če želite izvedeti druge tipke, ponovite korake 2-4.
  6. Pritisnite (Home) to save and exit, or the remote will exit automatically after 20 seconds.

Ponastavitev na tovarniško privzeto stanje

Pritisnite in držite (Domov) in (Back) keys simultaneously for 3 seconds. The indicator will flash 3 times to confirm. Remote has successfully been reset to factory default status.

Izbriši vse naučene ključe

Pritisnite in držite (Domov) in (Star) keys simultaneously for 3 seconds. The indicator will flash 3 times to confirm. All learned keys have been successfully deleted.

Detailed diagram of the Anderic RR-LC-16.2 remote control with programming instructions for various Roku TV brands and Roku Streaming Players.

Image: Anderic RR-LC-16.2 Advanced Universal Operating Guide with programming details.

Specifikacije

Dimenzije izdelka 5.75 x 1.75 x 1 palcev
Teža predmeta 1.76 unč
Številka modela artikla RRLC16.2
Baterije Potrebujete 2 AAA baterij
Znamka Anderič
Posebna funkcija Univerzalni
barva Črna
Največje število podprtih naprav 2
Združljive naprave Streaming Device, Television

Odpravljanje težav

  • Daljinski upravljalnik se ne odziva: Prepričajte se, da so baterije pravilno vstavljene in niso izpraznjene. Po potrebi jih zamenjajte.
  • Vidnem polju: The remote operates using infrared (IR) technology. Ensure there is a clear line of sight between the remote and your TV's IR receiver.
  • Nepravilna funkcionalnost: If buttons are not performing as expected, verify compatibility with your specific Roku TV model. For non-Sharp Roku TVs or Roku Boxes, ensure the remote has been correctly programmed using the learning method.
  • Bližnjice na tipkovnici ne delujejo: While the remote is universal, some shortcut keys may differ from your original remote. Ensure your streaming apps are installed and updated on your Roku TV.

Garancija in podpora

Anderic products are designed for quality and reliability. For any issues or support inquiries, please refer to the manufacturer's official webspletno mesto ali se obrnite na njihovo službo za stranke. Za uveljavljanje garancije shranite račun.

Anderic je registrirana blagovna znamka podjetja Dan's Electronics Etc., Inc. Vse pravice pridržane. Nismo povezani z družbo Roku. Roku je registrirana blagovna znamka družbe Roku Inc.

Za podporo obiščite: www.anderic.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.