Uvod
This manual provides instructions for the assembly, operation, and maintenance of your VonHaus Triple Monitor Stand. This stand is designed to support three monitors, ranging from 13 to 32 inches, with VESA compatibility of 75x75mm and 100x100mm. It features gas spring arms for easy adjustment and can be mounted using a desk clamp or grommet base, helping to free up valuable desk space.
Image: The VonHaus Triple Monitor Stand helps to free up desk space, providing a tidier and more organized appearance for your workstation.
Varnostne informacije
WARNING: Read all instructions before assembly and use. Failure to follow these instructions may result in property damage, serious injury, or death.
- Ensure your desk surface is strong enough to support the combined weight of the stand and three monitors.
- Do not exceed the maximum weight capacity of 7kg (15.4 lbs) per arm.
- Med sestavljanjem hranite otroke in hišne ljubljenčke proč.
- Uporabljajte samo priloženo strojno opremo. Ne zamenjujte delov.
- Občasno preverite vse povezave, da zagotovite, da ostanejo varne.
Vsebina paketa
Verify all components are present before beginning assembly. If any parts are missing or damaged, contact VonHaus customer service.
- Main Pole and Base
- Ročaji za monitorje (3)
- VESA plošče (3)
- Pisalna miza Clamp Montaža
- Grommet Base Assembly
- Komplet strojne opreme (vijaki, podložke, imbus ključi)
- Posnetki za upravljanje kablov
Nastavitev in namestitev
This monitor stand offers two installation methods: Desk Clamp in podstavek Grommet. Izberite metodo, ki najbolj ustreza vaši mizi.
Image: The stand offers easy installation with two mounting options: Desk Clamp for desk thicknesses of 10-85mm, and Grommet Base for desk thicknesses of 10-40mm and hole diameters of 10-60mm.
Step 1: Choose Mounting Method
- Pisalna miza Clamp: Priložite clamp na rob mize. Poskrbite, da boamp is securely tightened to a desk thickness between 10-85mm.
- Grommet Base: If your desk has a pre-drilled hole, secure the grommet base through the hole. This method is suitable for desk thicknesses between 10-40mm and hole diameters between 10-60mm.
Step 2: Assemble the Pole and Arms
- Attach the main pole to your chosen base (desk clamp ali pušo).
- Slide the monitor arms onto the main pole at the desired initial height.
3. korak: pritrdite plošče VESA na monitorje
- Secure the VESA plates to the back of each monitor using the appropriate screws from the hardware kit. Ensure your monitor's VESA patterns (75x75mm or 100x100mm) match the plate.
4. korak: Namestitev monitorjev na nosilce
- Carefully slide each monitor (with VESA plate attached) onto the corresponding arm.
- Secure with the provided locking mechanism.
5. korak: upravljanje kablov
- Route monitor cables through the integrated cable management clips on the arms and pole for a tidy setup.
Navodila za uporabo in nastavitve
The VonHaus Triple Monitor Stand allows for flexible positioning of your screens to achieve optimal viewudobje in produktivnost.
Image: The monitor stand offers extensive adjustability, including 180° tilt, 360° swivel, and height adjustment up to 40.7 cm, allowing for ergonomic positioning.
- Nastavitev višine: Loosen the collar on the main pole to slide the arms up or down to your desired height. Retighten the collar to secure the arms in place.
- Gas Spring Tension: Adjust the gas spring tension using the provided Allen key. Turn clockwise to increase tension for heavier monitors, or counter-clockwise to decrease tension for lighter monitors. Adjust until the monitor stays at the desired height when moved freely.
- Nagib: Each monitor can be tilted +35° to -35° to reduce glare and optimize viewing kotov.
- Vrtljiva: The arms allow for a 360° swivel, enabling you to share your screen or adjust for different tasks.
- Vrtenje: Rotate monitors 180° for quick switching between landscape and portrait orientation.
Image: The VonHaus Triple Monitor Stand is compatible with a wide range of screens, typically 13-27 inches, and supports VESA 75x75mm and 100x100mm mounting patterns.
Vzdrževanje
- Regularly inspect all mounting hardware and connections to ensure they are tight and secure.
- Očistite stojalo z mehko, damp krpo. Izogibajte se abrazivnim čistilom ali topilom.
- Do not lubricate the gas spring mechanism.
Odpravljanje težav
- Monitor sags or does not hold position: Adjust the gas spring tension. Turn the adjustment screw clockwise to increase tension for heavier monitors.
- Monitor is difficult to move: Adjust the gas spring tension. Turn the adjustment screw counter-clockwise to decrease tension for lighter monitors.
- Stojalo se zdi nestabilno: Poskrbite, da bo miza klamp or grommet base is securely tightened to the desk. Verify all arm connections are secure.
- Monitorji niso poravnani: Fine-tune the height and tilt of individual arms until all screens are aligned.
Specifikacije
| Znamka: | VonHaus |
| Model: | Stojalo za tri monitorje |
| Material: | Aluminij |
| Vrsta pritrditve: | Table Mount (Desk Clamp ali tesnilna obroča) |
| Združljiva velikost zaslona: | 13-32 palcev |
| Združljivost z VESA: | 75x75 mm, 100x100 mm |
| Maximum Weight Capacity per Arm: | 7 kg (15.4 lbs) |
| Razpon nagiba: | +35° do -35° |
| Obseg vrtenja: | 360° |
| Vrtenje: | 180° |
| Pisalna miza Clamp Debelina: | 10-85 mm |
| Debelina podnožja mize Grommet: | 10-40 mm |
| Premer odprtine za tesnilo: | 10-60 mm |
Garancija in podpora
This VonHaus Triple Monitor Stand comes with a 5-letna garancija proizvajalca. For warranty claims or technical support, please contact VonHaus customer service. Keep your proof of purchase for validation.
Image: The versatile design of the VonHaus Triple Monitor Stand makes it suitable for multiple workstations, whether for work, gaming, or general browsing.