Sato TM-22

Sato One-Touch Timer TM-22 Instruction Manual

Model: TM-22

1. Izdelek je končanview

The Sato One-Touch Timer TM-22 is a versatile digital timer designed for various timing needs, from kitchen use to laboratory applications. It combines ease of use with practical features to enhance your daily tasks.

Sato One-Touch Timer TM-22, front view prikaz digitalnega zaslona in gumbov

Slika 1: Spredaj view of the Sato One-Touch Timer TM-22. The timer features a clear digital display and control buttons.

Ključne značilnosti:

  • Automatic Reset Alarm: The alarm sounds for 5 seconds at the set time and automatically resets to the initial set time.
  • Preprosto delovanje: The primary key is for starting; no complex operations are required to stop the timer's alarm cycle.
  • Dual Notification: Alerts users with both sound (70dB) and light.
  • Drip-Proof Construction: Designed to resist splashes, making it suitable for kitchen environments.
  • Več možnosti namestitve: Equipped with a magnet on the back for attachment to metal surfaces and a strap for hanging.
  • Funkcije odštevanja in odštevanja: Supports both decreasing in povečanjeasing time measurements.

2. Nastavitev

Namestitev baterije:

The TM-22 timer requires one AAA battery for operation. A battery is included with the unit.

  1. Locate the battery compartment cover on the back of the timer.
  2. Potisnite ali odpnite pokrov, da odprete predal.
  3. Vstavite eno baterijo AAA in pazite, da se pozitivni (+) in negativni (-) pol pravilno poravnata z oznakami v predalu.
  4. Varno namestite pokrov prostora za baterije.

The timer should power on, and the display will show '00:00' or the last set time.

3. Navodila za uporabo

The TM-22 timer features both countdown and count-up functionalities.

3.1. Odštevalnik časa

This function allows you to set a specific duration, and the timer will count down to zero.

  1. Nastavi čas: Use the 'M' (Minute) button and 'S' (Second) button to adjust the desired countdown duration. The timer can be set from 1 second up to 99 minutes and 59 seconds.
  2. Začni odštevanje: Press the 'START' button to begin the countdown.
  3. Obvestilo o alarmu: When the time reaches zero, an alarm will sound for 5 seconds, accompanied by a flashing light.
  4. Samodejna ponastavitev: After the 5-second alarm, the timer automatically resets to the initial set time, ready for the next countdown without manual intervention.
  5. Premor/ustavitev: To pause the countdown, press the 'START' button again. To resume, press 'START' once more. To clear the set time, press the 'RESET' button (if available) or hold the 'START' button for a few seconds.

3.2. Count-up Timer

This function measures elapsed time from zero.

  1. Start Count-up: Ensure the timer display shows '00:00'. If not, press the 'RESET' button to clear any previous settings. Press the 'START' button to begin counting upwards from zero.
  2. Premor/nadaljevanje: To pause the count-up, press the 'START' button. To resume, press 'START' again.
  3. Ponastaviti: To reset the count-up timer to '00:00', press the 'RESET' button (if available) or hold the 'START' button for a few seconds while paused.

4. Vzdrževanje

Čiščenje:

To maintain the timer's appearance and functionality:

  • Wipe the exterior of the timer with a soft, dry cloth.
  • Do not use abrasive cleaners, solvents, or chemical agents, as these may damage the casing ali zaslon.
  • The timer is drip-proof, but do not immerse it in water or expose it to heavy splashing.

Zamenjava baterije:

Replace the battery when the display becomes dim or the timer's functions become erratic.

  • Follow the battery installation steps outlined in the "2. Setup" section.
  • Always use a fresh AAA battery.
  • Izrabljene baterije zavrzite v skladu z lokalnimi predpisi.

5. Odpravljanje težav

If you encounter issues with your TM-22 timer, refer to the following common problems and solutions:

TežavaMožen vzrokrešitev
Časovnik se ne vklopi.Baterija je prazna ali nepravilno vstavljena.Preverite polarnost baterije. Zamenjajte z novo baterijo AAA.
Display is faint or flickering.Nizka moč baterije.Zamenjajte AAA baterijo.
Alarm se ne oglasi.Volume obstruction or internal issue.Ensure the speaker is not covered. Check battery level. If problem persists, contact support.
Timer does not reset automatically after alarm.This feature is specific to the countdown function.Ensure you are using the countdown function. For count-up, manual reset is required.

6. Specifikacije

FunkcijaPodrobnost
Številka modelaTM-22
Največji čas99 minut 59 sekund
Minimum Timing1 sekundo
Dimenzije (V x Š x G)67 mm x 93 mm x 20 mm
Teža96 g
Vir napajanjaAAA baterija x 1 (priložena)
Glasnost alarma70 dB
FunkcijeCountdown, Count-up
Posebne lastnostiDrip-proof construction, Magnet on back, Hanging strap, Sound and light notification

7. Garancija in podpora

For warranty information, technical assistance, or customer support regarding your Sato One-Touch Timer TM-22, please contact your authorized retailer or the manufacturer, Sato Corporation. Keep your purchase receipt as proof of purchase.

Please visit the official Sato webspletno mesto za najnovejše informacije o podpori in kontaktne podatke.

© 2023 Sato Corporation. All rights reserved.

Ta priročnik se lahko spremeni brez predhodnega obvestila.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.