Donner Revecho Reverb Delay Pedal EC1118 Instruction Manual

1. Izdelek je končanview

The Donner Revecho is a versatile 2-in-1 guitar effect pedal, combining both reverb and delay effects. Designed for electric guitarists, it offers a compact solution for adding depth and ambiance to your sound. This pedal features independent controls for each effect, including a Tap Tempo function for precise delay synchronization and an Effect Tail feature for natural decay.

Ključne značilnosti:

• 2-in-1 Pedal: Seamlessly integrates delay and reverb effects.
• Instant Precision Control: Adjustable effect level, delay time, delay feedback, and reverberation time.
• Tapni Tempo: Provides instantaneous control over delay time for rhythm synchronization.
• Effect Tail: Enhances playability by allowing notes and chords to decay naturally after disengagement.
• Kompaktna zasnova: User-friendly form factor with buffer bypass for tonal purity.

Slika 1: Spredaj view of the Donner Revecho Reverb Delay Pedal.

2. Navodila za nastavitev

Zahteve glede napajanja:

The Donner Revecho pedal requires a 9V DC power adapter with a center-negative polarity and a minimum current of 100mA. This product does not come with a battery compartment. Using an improper power supply may cause the pedal to malfunction or result in damage.

Priključitev pedala:

1. Priključite svojo kitaro na IN vtičnico na desni strani pedala s standardnim 6,3 mm kablom za instrument.
2. Povežite VEN dvigalko na levi strani pedala na vaš amppedal ali naslednji pedal v signalni verigi s standardnim 6,3 mm kablom za instrument.
3. Connect the 9V DC power adapter to the 9V DC vhodni priključek.

Slika 2: Pod kotom view showing the input (IN) and output (OUT) jacks, and the 9V DC power input.

3. Navodila za uporabo

The Revecho pedal features five control knobs and two footswitches for comprehensive sound shaping.

Kontrole:

• REVERB: Adjusts the overall level or intensity of the reverb effect.
• POLAK: Controls the length of the reverb tail, from short to long.
• STOPNJA: Prilagodi skupno izhodno glasnost pedala.
• POVRATNE INFORMACIJE: Determines the number of delay repeats. Higher settings result in more repeats.
• ZAMUDA: Controls the delay time, from short slap-back echoes to long, atmospheric delays.

Nožna stikala:

• REVERB HOLD (TAIL): Activates or deactivates the reverb effect. Holding this footswitch engages the Effect Tail feature, allowing the reverb to naturally decay even after the effect is disengaged.
• DELAY HOLD (TAP): Activates or deactivates the delay effect. Tapping this footswitch multiple times sets the Tap Tempo for the delay time. Holding this footswitch will sustain the current delay repeats.

Slika 3: Zgornji del view of the pedal with control knobs and footswitches.

4. Vzdrževanje

To ensure the longevity and optimal performance of your Donner Revecho pedal, follow these maintenance guidelines:

• Čiščenje: Use a soft, dry cloth to clean the pedal's exterior. Avoid using abrasive cleaners or solvents, as they may damage the finish.
• Shranjevanje: Store the pedal in a cool, dry place away from direct sunlight and extreme temperatures. If not in use for an extended period, disconnect the power supply.
• Povezave: Občasno preverite vse kabelske povezave glede obrabe. Prepričajte se, da so vtičnice brez prahu in umazanije.

5. Odpravljanje težav

If you encounter issues with your Donner Revecho pedal, refer to the following common problems and solutions:

• Ni zvoka:
  • Ensure the power adapter is correctly connected and providing the specified 9V DC, center-negative power.
  • Preverite vse kable instrumenta glede pravilne povezave in delovanja.
  • Verify that the pedal is engaged (LEDs are lit) and the LEVEL knob is not set to minimum.
• Weak or Distorted Signal:
  • Check the power supply; insufficient current (below 100mA) can cause performance issues.
  • Ensure all cables are in good condition and fully inserted.
  • Adjust the LEVEL knob to an appropriate setting.
• Delay/Reverb Not Functioning:
  • Confirm that the respective effect is engaged via its footswitch.
  • Check the REVERB, DECAY, FEEDBACK, and DELAY knobs to ensure they are not set to minimum or extreme settings that might make the effect imperceptible.

6. Specifikacije

7. Garancija in podpora

Informacije o garanciji:

This Donner product is covered by a 2-letna garancija od datuma nakupa. Prosimo, shranite dokazilo o nakupu za uveljavljanje garancije.

Podpora strankam:

For further assistance, technical support, or warranty inquiries, please visit the official Donner webspletno mesto ali se obrnite na njihovo službo za pomoč strankam. Kontaktne podatke običajno najdete na embalaži izdelka ali na proizvajalčevem webmesto.