Artemide Tolomeo Table Lamp Micro Instruction Manual

1. Uvod

Thank you for choosing the Artemide Tolomeo Table Lamp Micro. This manual provides essential information for the safe and efficient use of your new lamp. The Tolomeo Micro is designed with a fully adjustable, articulated anodized aluminum arm and body, featuring die-cast aluminum joints and tension control knobs for precise positioning. Its monochromatic matte finish complements various interior styles.

Pred namestitvijo in uporabo natančno preberite ta priročnik in ga shranite za poznejšo uporabo.

2. Varnostne informacije

Observe the following safety precautions to prevent injury or damage to the lamp:

• Prepričajte se, da je napajalnik voltage se ujema z lampzahteve (120 V).
• Vedno odklopite lamp iz vtičnice, preden ga očistite, zamenjate žarnico ali opravite kakršno koli vzdrževanje.
• Ne prekoračite največje wattage specified for the bulb (100W max). Use only E26 (medium base) A19 compatible incandescent, compact fluorescent, or LED lamps.
• Avoid touching the bulb directly after use, as it may be hot.
• Ne uporabljajte lamp with a damaged cord or plug. If damaged, contact qualified service personnel.
• Obdrži lamp away from water or other liquids. Do not use in damp ali mokrih lokacijah.
• Zagotovite lamp base is placed on a stable, level surface to prevent tipping.
• Ta lamp je zasnovan samo za uporabo v zaprtih prostorih.

3. Vsebina paketa

Preverite, ali so v paketu prisotne vse komponente:

• Artemide Tolomeo Table Lamp Micro (Articulated Arm, Head, Base)
• Napajalni kabel
• Žarnica ni priložena.

4. Nastavitev

4.1 Razpakiranje in namestitev

Carefully remove all components from the packaging. Place the lamp base on a flat, stable surface. Ensure there is sufficient space for the articulated arm to extend and adjust without obstruction.

Image: Two Artemide Tolomeo Table Lamps, illustrating the adjustable arm and stable base design.

4.2 Vgradnja žarnice

1. Zagotovite lamp je izklopljen iz električne vtičnice.
2. Gently unscrew the lamp head to access the bulb socket.
3. Insert an E26 (medium base) A19 compatible bulb, ensuring it does not exceed 100W.
4. Privijte lamp head back into place securely.

Image: Close-up of the lamp head, indicating the area for bulb installation.

4.3 Napajalni priključek

Plug the power cable into a standard 120V electrical outlet. Ensure the cable is not pinched or routed in a way that could cause a tripping hazard.

5. Navodila za uporabo

5.1 Vklop/izklop

The Artemide Tolomeo Table Lamp Micro features a touch switch for convenient operation. Locate the touch-sensitive area on the lamp (typically on the base or head, refer to product specifics if available). A single touch will turn the lamp vklop ali izklop.

5.2 Adjusting the Lamp

Lamp's articulated arm and head offer extensive adjustability:

• Prilagoditev roke: Gently move the articulated aluminum arm to position the light source as desired. The tension control knobs at the joints allow for smooth movement and stable positioning.
• Shade Rotation: Lamp head can rotate 360 degrees, allowing you to direct light precisely where needed.

Image: Artemide Tolomeo Table Lamps in an extended position, highlighting the adjustable arm functionality.

6. Vzdrževanje

6.1 Čiščenje

Vedno izključite lamp pred čiščenjem.

• Wipe the aluminum surfaces with a soft, dry cloth.
• Za trdovratne madeže uporabite rahloamp cloth with a mild, non-abrasive cleaner. Dry immediately.
• Ne uporabljajte agresivnih kemikalij, abrazivnih čistil ali topil, saj lahko poškodujejo premaz.

6.2 Zamenjava žarnice

Refer to section 4.2 for detailed bulb installation instructions. Ensure the lamp is unplugged and the bulb has cooled down before attempting to replace it.

6.3 Tension Adjustment

If the articulated arm feels too loose or too stiff, the tension control knobs at the joints can be adjusted. Turn them clockwise to increase tension or counter-clockwise to decrease tension, finding a comfortable balance for movement and stability.

7. Odpravljanje težav

Če naletite na težave z vašim lamp, glejte naslednje pogoste težave in rešitve:

8. Specifikacije

9. Garancija in podpora

Artemide products are manufactured to high-quality standards. For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your purchase or visit the official Artemide webmesto.

For technical support, replacement parts, or any inquiries not covered in this manual, please contact Artemide customer service through their official channels. Contact information can typically be found on the product packaging or the manufacturer's webmesto.