Integrirani stereo zvočnik Audiolab 6000A Ampuporabniški priročnik za lifier

Uvod

Hvala za nakupasing the Audiolab 6000A Stereo Integrated Amplifier. This manual provides essential information for setting up, operating, and maintaining your amplifier to ensure optimal performance and longevity. The Audiolab 6000A is a versatile 100-watt integrated amplifier with built-in Bluetooth connectivity and an ESS 9018K2M DAC, offering a high-quality audio experience.

Varnostne informacije

• Napajanje: Zagotovite ampNapajalnik je priključen na napajanje, ki ustreza glasnostitage naveden na enoti.
• Prezračevanje: Ne blokirajte prezračevalnih odprtin. Okoli enote pustite dovolj prostora za pravilen pretok zraka, da preprečite pregrevanje.
• Vlaga: Keep the unit away from water, moisture, and high humidity.
• Čiščenje: Disconnect from power before cleaning. Use a soft, dry cloth. Do not use liquid or aerosol cleaners.
• Servisiranje: Vsa servisna dela prepustite usposobljenemu serviserju. Ne poskušajte sami odpirati ali popravljati enote.
• Umestitev: Napravo postavite na stabilno, ravno površino. Izogibajte se postavljanju v bližino virov toplote ali na neposredno sončno svetlobo.

Kaj je v škatli

Po razpakiranju preverite, ali so prisotni vsi spodaj navedeni predmeti:

• Audiolab 6000A 100-watt Stereo Integrated Amp/Bluetooth DAC - Silver
• Napajalni kabel
• Uporabniški priročnik (ta dokument)

Konec izdelkaview

Sprednja plošča

Slika 1: Spredaj view of the Audiolab 6000A integrated amplifier, showing the display, control knobs for selection, mode, and volume, and power button.

1. SEL (Selection) Knob: Used to navigate menus and select inputs.
2. Gumb MODE: Used to switch between different operating modes.
3. Zaslon: Shows current input, volume level, and operational status.
4. Gumb za glasnost (VOL): Prilagodi izhodno glasnost.
5. Izhod za slušalke: 6.35 mm priključek za priklop slušalk.
6. IR sprejemnik: Za signale daljinskega upravljalnika.
7. Gumb za vklop: Turns the unit on/off or puts it into standby.

Zadnja plošča

Slika 2: Zadaj view of the Audiolab 6000A integrated amplifier, showing various input and output terminals, power inlet, and antenna.

1. Power Inlet & Fuse: Connects to AC power. Includes a fuse holder.
2. Stikalo za vklop: Main power toggle.
3. Izhodi za zvočnike: Binding posts for connecting left and right speakers.
4. Digitalni vhodi (optični/koaksialni): Za priklop digitalnih avdio virov.
5. Vhod USB: For firmware updates (not for audio playback).
6. Bluetooth antena: Za brezžično povezavo Bluetooth.
7. Analog Inputs (AUX1, AUX2, AUX3): RCA inputs for analog audio sources.
8. Phono vhod: Dedicated RCA input for turntables (MM).
9. Predizhod: RCA outputs for connecting to an external power amplifier.

Nastavitev

1. Umestitev

Place the Audiolab 6000A on a flat, stable surface, ensuring adequate ventilation around the unit. Avoid direct sunlight, heat sources, and areas with high humidity.

2. Priključitev zvočnikov

Connect your passive speakers to the speaker output terminals on the rear panel. Ensure correct polarity (+ to + and - to -) for both left and right channels. Use high-quality speaker cables for optimal sound.

3. Priključitev avdio virov

• Analogni viri: Connect CD players, tuners, or other analog devices to the AUX1, AUX2, or AUX3 RCA inputs.
• Gramofon: Connect a turntable with a Moving Magnet (MM) cartridge to the PHONO input.
• Digitalni viri: Connect digital audio sources like TVs, game consoles, or media streamers to the OPT1, OPT2 (Optical) or COAX1, COAX2 (Coaxial) inputs.

4. Napajalni priključek

Once all audio connections are made, connect the supplied power cable to the AC inlet on the rear panel and then to a suitable wall outlet. Ensure the main power switch on the rear panel is in the OFF position before connecting.

Delovanje

1. Vklop/izklop

First, ensure the main power switch on the rear panel is in the ON position. Then, press the front panel Power button to turn the unit on or put it into standby mode.

2. Izbira vhoda

Zavrtite SEL knob on the front panel to cycle through available input sources (e.g., AUX1, OPT1, Bluetooth, Phono). The selected input will be displayed on the screen.

3. Nadzor glasnosti

Zavrtite VOL knob clockwise to increase volume and counter-clockwise to decrease volume. The current volume level will be shown on the display.

4. Načini delovanja

The Audiolab 6000A features three distinct operating modes, selectable via the NAČIN gumb:

• Integrated Mode: Standardno amplifier operation, where the pre-ampblažilec in moč amplifier sections work together.
• Pre-Power Mode: Predhodnoamplifier section is bypassed, allowing the 6000A to function purely as a power amplifier. Useful when connecting an external pre-amplifier.
• predAmpLifier način: Moč amplifier section is bypassed, allowing the 6000A to function purely as a pre-amplifier. Useful when connecting an external power amplifier via the Pre-Out terminals.

5. Bluetooth seznanjanje

Če želite seznaniti napravo Bluetooth:

1. Select the Bluetooth input using the SEL gumb.
2. The display will show "PAIRING" or similar, indicating it's ready to connect.
3. On your mobile device, enable Bluetooth and search for "Audiolab 6000A".
4. Izberite amplifier from the list to complete pairing. Once connected, the display will confirm.

6. DAC Functionality

The Audiolab 6000A incorporates an ESS 9018K2M DAC, allowing for high-resolution digital audio playback. Connect your digital sources (e.g., CD transport, network streamer) to the optical or coaxial digital inputs to utilize the internal DAC.

Vzdrževanje

• Čiščenje: Use a soft, dry, lint-free cloth to clean the exterior of the ampNe uporabljajte abrazivnih čistil, voskov ali topil.
• Prezračevanje: Periodically check that the ventilation slots are clear of dust and debris.
• Shranjevanje: Če enoto shranjujete dalj časa, jo izključite iz električnega omrežja in jo shranite na hladnem in suhem mestu.

Odpravljanje težav

Specifikacije

• Model: Audiolab 6000A
• Izhodna moč: 50W x 2 into 8 Ohms
• DAC: ESS 9018K2M
• Povezljivost: Bluetooth omogočen
• Načini delovanja: Integrated, Pre-Power, Pre-Amplifier
• Dimenzije izdelka: 13 x 17.5 x 3.15 palcev
• Teža: 21.6 funta
• voltage: 100 volta
• Minimalna dobava Voltage: 15 voltov (DC)

Garancija in podpora

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Audiolab webspletnega mesta. Shranite dokazilo o nakupu za morebitne garancijske zahtevke.

Proizvajalec: Audiolab