TSL Platinum Professional Level 8 Channel NVR – 4K User Manual

1. Uvod

This manual provides instructions for the installation, operation, and maintenance of your TSL Platinum Professional Level 8 Channel NVR (Network Video Recorder), Model LTN8708Q P8. This NVR supports up to 8 channels of IP camera input, with resolutions up to 8 Megapixels, and utilizes H.265/H.265+/H.264/H.264 Zip+/MPEG4 video formats for efficient storage and high-quality video. Please read this manual thoroughly before operating the device to ensure proper use and to prevent damage.

Vsebina paketa

Preverite, ali so v paketu vsi spodaj navedeni predmeti. Če kateri koli predmet manjka ali je poškodovan, se obrnite na prodajalca.

• TSL Platinum Professional Level 8 Channel NVR Unit
• Napajalni adapter
• Miška USB
• Daljinski upravljalnik
• SATA Cables (for hard drive connection)
• Mounting Screws (for hard drive)
• Vodnik za hiter začetek

Slika 1: NVR Package Contents. This image displays the power adapter, remote control, SATA data and power cables, and mounting screws that are typically included with the NVR unit.

2. Varnostne informacije

Za preprečitev poškodb ali škode na napravi upoštevajte naslednje varnostne ukrepe:

• Prepričajte se, da je napajalnik voltagPred priklopom NVR-ja je vse pravilno.
• NVR-ja ne izpostavljajte vodi ali vlagi.
• Izogibajte se postavljanju NVR-ja na neposredno sončno svetlobo ali v bližino virov toplote.
• Install the NVR in a well-ventilated area to prevent overheating.
• Ne odpirajte NVR-ja casing. Vsa servisna dela prepustite usposobljenemu osebju.
• Uporabljajte samo dodatke, ki jih je določil proizvajalec.

3. Izdelek je končanview

NVR Front and Rear Panels

Slika 2: NVR Front and Rear Panels. The top image shows the front panel with power, status, and Tx/Rx indicators, along with control buttons and a USB port. The bottom image displays the rear panel with PoE ports, audio in/out, LAN, HDMI, VGA, and power input.

Front Panel Indicators and Controls:

• MOČ: Indikator moči.
• STATUS: Indikator stanja sistema.
• Oddaja/sprejem: Data transmission/reception indicator.
• Gumbi za upravljanje: For menu navigation and system control.
• Vrata USB: For mouse or USB storage device connection.

Vmesniki na zadnji plošči:

• PoE Ports (8 channels): Connect IP cameras directly for power and data.
• AVDIO VHOD/IZHOD: Za zunanje avdio naprave.
• Vrata LAN: Connect to your network router/switch.
• HDMI izhod: Connect to a monitor for high-resolution video output (up to 4K).
• VGA izhod: Connect to a monitor for video output (up to 1080p).
• Vhodna moč (48 V): Priključite priloženi napajalnik.
• Stikalo za vklop: To turn the NVR on/off.

Ključne značilnosti

• 8 channel PoE IP camera input, supporting cameras up to 8MP with a maximum incoming bandwidth of 80Mbps.
• H.265+ / H.265 / H.264+ / H.264 video formats for efficient compression.
• 2x SATA interfaces for hard drives (hard drives are not included).
• HDMI / VGA simultaneous output. HDMI output up to 4K@30Hz, VGA output up to 1080p@60Hz.
• Podprite v živo view, storage, and playback of connected cameras.

4. Nastavitev

4.1 Namestitev trdega diska (izbirno)

The NVR requires a hard drive for video recording. Hard drives are not included and must be purchased separately. The NVR supports up to two SATA hard drives.

1. Odvijte in odstranite zgornji pokrov NVR.
2. Connect the SATA data cable and power cable to the hard drive and the corresponding ports on the NVR motherboard.
3. Trdi disk pritrdite na ohišje NVR-ja s priloženimi vijaki.
4. Namestite zgornji pokrov in ga pritrdite z vijaki.

4.2 Povezovanje kamer

Connect your IP cameras to the PoE ports on the rear panel of the NVR using Ethernet cables. The PoE ports provide both power and data connection to compatible cameras.

Slika 3: Camera Wiring Compatibility. This image illustrates that a standard network cable (Ethernet/PoE) is compatible for connecting cameras to this NVR, while traditional DC power and BNC video cables are not compatible.

4.3 Connecting to a Display and Network

• Priključite monitor na izhodna vrata HDMI ali VGA na snemalniku.
• Priključite miško USB na enega od vrat USB na snemalniku.
• Connect the NVR's LAN port to your network router or switch using an Ethernet cable for network access and remote viewzmogljivosti.

4.4 Vklop

Connect the provided power adapter to the NVR's 48V power input and then plug it into a power outlet. Flip the power switch on the rear panel to the ON position. The NVR will boot up, and you should see the boot screen on your connected monitor.

5. Navodila za uporabo

5.1 Čarovnik za začetno nastavitev

Upon first boot, the NVR will guide you through an initial setup wizard. Follow the on-screen prompts to set up language, date/time, network settings, and hard drive initialization.

5.2 V živo View

Po začetni nastavitvi bo NVR prikazal sliko v živo view povezanih kamer. Preklapljate lahko med eno kamero view in mreža z več kamerami view using the on-screen controls or the remote control.

5.3 Snemanje

The NVR supports continuous recording, scheduled recording, and motion-triggered recording. Configure recording schedules and settings via the main menu. Ensure your hard drive is initialized and healthy for recording.

5.4 Predvajanje

Dostop do posnetega footage through the playback menu. You can search for recordings by date, time, and event type. Use the playback controls to fast forward, rewind, and pause.

5.5 Dostop do omrežja in oddaljeni dostop Viewing

Once the NVR is connected to your network, you can access it remotely via a web browser or a dedicated mobile application. Refer to the NVR's network settings for IP address and port information. Ensure proper port forwarding is configured on your router for external access.

6. Vzdrževanje

6.1 Upravljanje trdega diska

Regularly check the status of your hard drives through the NVR's menu. Format hard drives periodically if necessary, or configure them for overwrite mode to ensure continuous recording.

6.2 Posodobitve vdelane programske opreme

Preverite pri proizvajalcu website for available firmware updates. Keeping your NVR's firmware up-to-date ensures optimal performance and security. Follow the provided instructions carefully when performing updates.

6.3 Čiščenje

Clean the exterior of the NVR with a soft, dry cloth. Do not use liquid cleaners or aerosols. Ensure ventilation openings are free from dust and obstructions.

7. Odpravljanje težav

• Brez napajanja:

  Ensure the power adapter is securely connected to both the NVR and a working power outlet. Check the power switch on the rear panel.
• Brez video izhoda:

  Verify the HDMI/VGA cable is securely connected to both the NVR and the monitor. Ensure the monitor is powered on and set to the correct input source.

• Kamere se ne prikazujejo:

  Check that cameras are properly connected to the PoE ports. Ensure cameras are powered on and compatible with the NVR. Verify network settings for IP cameras.

• Brez snemanja:

  Confirm that a hard drive is installed and properly initialized. Check recording schedules and ensure there is sufficient disk space. Verify camera connections.
• Težave z oddaljenim dostopom:

  Ensure the NVR is connected to the network and has a valid IP address. Check router settings for port forwarding and firewall rules. Verify mobile app or web nastavitve brskalnika.

8. Specifikacije

9. Garancija in podpora

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official TSL webspletnega mesta. Račun shranite kot dokazilo o nakupu za uveljavljanje garancije.

For further assistance, you may contact your local distributor or the manufacturer's customer service department.