MXR M228

MXR M228 Dyna Comp Deluxe Compressor Guitar Effect Pedal Instruction Manual

Model: M228

Znamka: MXR

Uvod

The MXR M228 Dyna Comp Deluxe Compressor brings enhanced control to the classic compression sound. This pedal is designed to shape and refine your guitar tone, offering both vintage and modern compression characteristics. Its circuitry is built around the CA3080 "metal can" integrated circuit, known for its quiet operation, transparency, and dynamic range.

Nastavitev

Zahteve glede napajanja

The Dyna Comp Deluxe operates on a 9V AC power adapter. Ensure the adapter is compatible with the pedal's power input. The power input jack is located on the side of the pedal.

9 V napajalnik

Slika 1: A standard 9V AC power adapter, used to power the MXR Dyna Comp Deluxe pedal.

Priključitev pedala

Priključite svojo kitaro na VNOS jack on the right side of the pedal using a standard 1/4-inch instrument cable. Connect the IZHOD dvigalko na levi strani pedala na vaš amplifier or the next pedal in your signal chain using another 1/4-inch instrument cable.

Stran view of MXR Dyna Comp Deluxe showing input, output, and power jacks

Slika 2: Stran view of the MXR Dyna Comp Deluxe pedal, illustrating the input, output, and 9V power jacks.

Battery Installation (Optional)

To install a 9V battery, remove the four screws on the bottom plate of the pedal. Carefully lift the bottom plate to access the battery compartment. Connect a 9V battery to the clip and place it inside the compartment. Replace the bottom plate and secure the screws.

Spodaj view of MXR Dyna Comp Deluxe pedal with four screws visible

Slika 3: Spodaj view of the MXR Dyna Comp Deluxe pedal, showing the four screws that secure the battery compartment cover.

Operating the Dyna Comp Deluxe

The Dyna Comp Deluxe features several controls to fine-tune your compression. Experiment with each knob and switch to find the sound that best suits your playing style.

Vrh view of MXR Dyna Comp Deluxe pedal with all controls labeled

Slika 4: Vrh view of the MXR Dyna Comp Deluxe pedal, highlighting the control knobs and switches.

Kontrole:

  • IZHOD: Controls the overall volume level of the compressed signal.
  • OBČUTLJIVOST: Adjusts the length of sustain. Higher sensitivity results in longer sustain.
  • ČISTO: Blends your unaffected (dry) signal with the compressed signal. This allows for a balanced mix, preserving some of your original tone while benefiting from compression.
  • TON: Refines the character of the compressed signal, allowing you to brighten or darken the effect to your preference.
  • Stikalo ATTACK: Toggles between two attack times:
    • Vintage (Slow Attack): Provides a more traditional, percussive compression feel.
    • Modern (Fast Attack): Offers a quicker response, suitable for contemporary playing styles.

Understanding Compression:

A compressor pedal reduces the dynamic range of your guitar signal. It makes louder notes quieter and quieter notes louder, resulting in a more even and sustained sound. This can be particularly useful for balancing dynamics when switching between loud chords and softer single-note lines.

Posnetek 1: A demonstration of the MXR Dyna Comp Deluxe Compressor M228, showcasing its clean funk tones and control over dynamics.

Posnetek 2: Večview of the MXR Dyna Comp Deluxe Compressor M228, demonstrating its features and sound.

Posnetek 3: An informational video explaining the function and application of a compression pedal in general.

Vzdrževanje

  • Čiščenje: Use a soft, dry cloth to clean the pedal. Avoid abrasive cleaners or solvents.
  • Shranjevanje: Store the pedal in a dry environment, away from extreme temperatures or humidity.
  • Povezave: Periodically check all cables and connections for wear and tear to ensure optimal performance.

Odpravljanje težav

  • Ni zvoka:
    • Preverite vse kabelske povezave (vhodne, izhodne, napajalne).
    • Ensure the power adapter is correctly connected and functioning, or that the 9V battery is fresh and properly installed.
    • Preverite, ali vaša kitara in amplifier are working correctly by bypassing the pedal.
  • Neželen hrup/brnenje:
    • Prepričajte se, da so vsi kabli pravilno zaščiteni in v dobrem stanju.
    • Try using a different power supply to rule out power-related noise.
    • Move the pedal away from other electronic devices that might cause interference.
  • Učinek ni privlačen:
    • Press the footswitch firmly to ensure it engages. The LED indicator should light up when the effect is active.
    • Check the 'Clean' knob setting; if it's fully clockwise, you might be hearing mostly the dry signal.

Specifikacije

Številka modelaM228
ZnamkaMXR
Teža predmeta11.8 unče (0.74 funta)
Dimenzije izdelka5.5 x 4.5 x 2.5 palcev
Strojni vmesnik1/4-palčni avdio
Format signalaAnalogni
Vir napajanjaAdapter
voltage9 volta
barvaRdeča

Garancija in podpora

For detailed warranty information and customer support, please refer to the official MXR webali se obrnite na pooblaščenega prodajalca. Shranite dokazilo o nakupu za morebitne garancijske zahtevke.

© 2023 MXR. All rights reserved. Information subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.