PowEver NP-FZ100 AC Power Adapter Dummy Battery Kit User Manual

1. Izdelek je končanview

The PowEver NP-FZ100 AC Power Adapter Dummy Battery Kit is designed to provide continuous power to compatible Sony Alpha cameras, eliminating the need for frequent battery changes during extended use. This kit is an AC adapter, not a battery charger, and requires connection to a wall socket for operation. It is ideal for long photo sessions, video recording, live streaming, or downloading images.

Ključne značilnosti:

• Neprekinjeno napajanje: Ensures uninterrupted operation for your camera.
• Združljivost po vsem svetu: Vhodna voltage AC 100~240V, 50~60Hz.
• Varnostne zaščite: Vgrajeni over-voltage, short circuit, and over-temperature protection.
• Certifikati: CE, FCC, ROHS certified for safety and quality.

Compatible Camera Models:

• Sony Alpha a7 III (alpha 7 III / ILCE-7M3)
• Sony Alpha a7R III (alpha 7R III / ILCE-7RM3)
• Sony Alpha a7R IV
• Sony Alpha a7S III
• Sony Alpha a9 (alpha 9 / ILCE-9)
• Sony Alpha a9R
• Sony Alpha a9S
• Sony Alpha a6600

Image 1.1: The PowEver NP-FZ100 AC Power Adapter Dummy Battery Kit shown with various compatible Sony Alpha cameras, illustrating its application.

2. Navodila za nastavitev

Follow these steps to correctly set up your PowEver NP-FZ100 AC Power Adapter Dummy Battery Kit with your camera:

1. Connect the DC Coupler: Insert the small barrel connector from the dummy battery (DC coupler) into the DC output port of the AC adapter. Ensure a secure connection.
2. Insert Dummy Battery: Open the battery compartment door on your Sony camera. Insert the NP-FZ100 DC coupler (dummy battery) into the camera's battery slot, ensuring it is oriented correctly.
3. Napeljite kabel: Locate the small rubber flap or opening on your camera's battery compartment door. Carefully route the dummy battery cable through this opening. This allows the battery door to close completely while the cable remains connected.
4. Priključite napajalni kabel: Plug the AC power cord into the AC adapter. Then, plug the other end of the AC power cord into a standard wall electrical outlet (AC 100-240V).
5. Preverite povezavo: Once all connections are made, power on your camera. The camera should indicate a full battery charge or external power supply, confirming successful setup.

Image 2.1: The main components of the PowEver NP-FZ100 kit, including the dummy battery (DC coupler) and the AC adapter, ready for connection.

Slika 2.2: Bližnji posnetek view of the NP-FZ100 dummy battery, showing its design for insertion into the camera's battery compartment.

3. Navodila za uporabo

Once the PowEver NP-FZ100 AC Power Adapter Dummy Battery Kit is correctly set up and connected to a power source, your camera will receive continuous power. There are no additional operating steps required for the adapter itself.

• Ensure the AC adapter is plugged into a functional wall outlet.
• Confirm that the camera's battery door is closed securely with the cable routed through the designated opening.
• Operate your camera as usual, enjoying extended usage without battery concerns.

Important: This device is an AC power adapter, not a battery charger. It does not charge your camera's internal battery. It provides direct power to the camera from an electrical outlet.

4. Vzdrževanje in nega

To ensure the longevity and optimal performance of your PowEver NP-FZ100 AC Power Adapter Dummy Battery Kit, please observe the following maintenance guidelines:

• Shranjevanje: Komplet shranjujte na hladnem in suhem mestu, stran od neposredne sončne svetlobe in ekstremnih temperatur, ko ga ne uporabljate.
• Čiščenje: Use a soft, dry cloth to clean the adapter and cables. Do not use liquid cleaners or solvents.
• Ravnanje: Avoid dropping the adapter or dummy battery, as this can cause internal damage. Do not pull on the cables forcefully.
• Celovitost kabla: Regularly inspect cables for any signs of wear, cuts, or damage. Discontinue use if damage is observed.
• Prezračevanje: Ensure the AC adapter has adequate ventilation during operation to prevent overheating.

5. Odpravljanje težav

If you encounter issues with your PowEver NP-FZ100 AC Power Adapter Dummy Battery Kit, refer to the following common troubleshooting steps:

• Kamera se ne vklopi:
  • Ensure all connections (dummy battery to camera, DC coupler to AC adapter, AC adapter to wall outlet) are secure.
  • Preverite delovanje stenske vtičnice tako, da jo preizkusite z drugo napravo.
  • Confirm the camera's battery compartment door is fully closed with the cable properly routed.
  • Check if the camera itself is functioning correctly with a standard battery.
• Občasno napajanje:
  • Check for loose connections at any point in the power chain.
  • Inspect cables for damage. A damaged cable can cause intermittent power.
• Adapter se na otip topel:
  • It is normal for the AC adapter to feel slightly warm during operation. However, if it becomes excessively hot, disconnect it immediately.
  • Prepričajte se, da je adapter v dobro prezračevanem prostoru in ni pokrit.

Če ti koraki ne odpravijo težave, se obrnite na podporo strankam.

6. Specifikacije

Image 6.1: The AC adapter displaying safety certifications and protection icons, including overcurrent, overtemperature, over voltage, in zaščita pred kratkim stikom.

Image 6.2: Visual representation of the dimensions for the AC adapter and its associated cables.

Image 6.3: Detail of the power cable, highlighting its flame retardant PVC material for durability and safety.

7. Garancija in podpora

While specific warranty details are not provided, PowEver is committed to customer satisfaction. If you have any questions, concerns, or require assistance with your NP-FZ100 AC Power Adapter Dummy Battery Kit, please do not hesitate to contact us.

Podpora strankam:

Na vsa povpraševanja si prizadevamo odgovoriti v 24 urah.

Please refer to your purchase documentation or the seller's contact information for the most direct support channels.