SECRUI Wireless Doorbell Instruction Manual (Model M5373+F152)

1. Uvod

Thank you for choosing the SECRUI Wireless Doorbell. This manual provides detailed instructions to ensure proper installation, operation, and maintenance of your device. Please read this manual thoroughly before use and retain it for future reference.

2. Vsebina paketa

Preverite, ali so v vašem paketu priloženi vsi spodaj navedeni elementi:

• 1 × Transmitter (Doorbell Button) with pre-installed battery
• 1 × Vtični sprejemnik
• 1 × Adhesive Tape for mounting
• 1 × Screw for mounting
• 1 × Anchor for mounting
• 1 × Uporabniški priročnik (ta dokument)

Slika 2.1: Vključene komponente

3. Značilnosti izdelka

• Sodoben dizajn: Sleek white aesthetic that complements various home decors.
• Enostavna namestitev: No complex wiring required, offering quick setup.
• Razširjen obseg: Up to 1000 feet (300 meters) wireless transmission range.
• Prilagodljiva opozorila: 32 selectable melodies and 5 adjustable volume levels (including mute mode).
• Odporen na vremenske vplive: Stopnja vodoodpornosti IP55 za vzdržljivost na prostem.
• Razširljiv sistem: Supports connection of up to 20 accessories (additional transmitters or receivers).

Figure 3.1: SECRUI Wireless Doorbell Kit

4. Nastavitev in namestitev

4.1. Namestitev sprejemnika

1. Plug the receiver into a standard electrical outlet in your desired location. Ensure the outlet is easily accessible and within the wireless range of the transmitter.
2. Upon plugging in, the receiver will light up and beep twice, indicating it is powered on and ready for pairing.

Figure 4.1: Plug-in Receiver

Figure 4.2: Compact Receiver Design

4.2. Transmitter (Doorbell Button) Installation

Choose a suitable location for your doorbell button, typically near your front door. Ensure the surface is clean and dry before installation.

Slika 4.3: Metode namestitve

Metoda 1: Pritrditev z lepilom

1. Clean the mounting surface thoroughly with a degreasing agent or alcohol wipe to ensure optimal adhesion. Allow the surface to dry completely.
2. Peel off one side of the provided adhesive tape and firmly attach it to the back of the doorbell button.
3. Peel off the other side of the adhesive tape and press the doorbell button firmly onto the desired clean surface for at least 30 seconds.

2. način: Pritrditev z vijaki

1. Carefully open the back cover of the doorbell button.
2. Označite položaje za vrtanje lukenj s pomočjo zadnjega pokrova kot šablone.
3. Drill two holes at the marked positions. Insert the provided anchors into the holes.
4. Secure the back cover to the wall using the provided screws.
5. Attach the doorbell button to its secured back cover.

The transmitter is designed to be weather-resistant (IP55 rated), suitable for outdoor use in various conditions.

Figure 4.4: Weather Resistant Transmitter

5. Navodila za uporabo

5.1. Prilagoditev glasnosti

The receiver features volume control buttons on its side. Press the volume up/down buttons to cycle through 5 different volume levels, including a mute mode. Select the desired volume for your environment.

5.2. Izbira melodije zvonjenja

The receiver offers 32 distinct melodies. Use the melody selection buttons on the side of the receiver to preview and choose your preferred ringtone. The receiver has a memory function to retain your last selected melody and volume level even after a power outage.

Figure 5.1: Receiver Controls

5.3. Pairing Additional Transmitters/Receivers

The system supports connecting up to 20 accessories (additional doorbell buttons or receivers). To pair a new accessory:

1. Priključite sprejemnik.
2. Press and hold the volume button on the receiver for approximately 5 seconds until the LED indicator flashes rapidly. This puts the receiver into pairing mode.
3. Immediately press the button on the new transmitter. The receiver will chime, indicating successful pairing.
4. Test the new transmitter to ensure it triggers the receiver.

You can assign different ringtones to different transmitters to distinguish which door is being rung.

6. Vzdrževanje

6.1. Čiščenje

Wipe the doorbell button and receiver with a soft, dry cloth. Do not use abrasive cleaners or solvents. The doorbell button is IP55 rated, meaning it is protected against dust and water splashes, but should not be submerged in water.

6.2. Zamenjava baterije (oddajnik)

The transmitter uses an Alkaline battery (CR2032, typically). If the doorbell button stops working or the LED indicator does not light up when pressed, the battery may need replacement. To replace:

1. Previdno odprite zadnji pokrov oddajnika.
2. Remove the old battery and insert a new CR2032 Alkaline battery, ensuring correct polarity (+/-).
3. Trdno zaprite zadnji pokrov.

Figure 6.1: Transmitter Battery Access

7. Odpravljanje težav

8. Specifikacije

• Znamka: SECRUI
• Številka modela: M5373+F152
• Brezžični doseg: Up to 1000ft (300m) in open air
• Melodije zvonjenja: 32 izbirnih melodij
• Stopnje glasnosti: 5 levels (0-120dB), including mute
• Vodoodpornost (oddajnik): IP55
• Delovna temperatura: -4°F do 140°F (-20°C do 60°C)
• Vir napajanja (sprejemnik): AC 110–240 V (vtičnica)
• Vir napajanja (oddajnik): 1 x CR2032 Alkaline Battery (included)
• Dimenzije izdelka (približno): 4 x 2 x 2 inches (Receiver), 2.56 x 1.30 x 0.59 inches (Transmitter)
• Teža artikla (približno): 4.2 unč

9. Garancija in podpora

For warranty information, technical support, or any inquiries regarding your SECRUI Wireless Doorbell, please refer to the manufacturer's official webspletno mesto ali se obrnite neposredno na njihovo službo za stranke. Kontaktne podatke običajno najdete na embalaži izdelka ali na proizvajalčevem webmesto.