Brother LS2125 LS2125i LS2129 Sewing Machine Instruction Manual

1. Namestitev in začetna priprava

Before operating your Brother sewing machine, ensure it is properly set up and prepared for use. Follow these steps carefully.

1.1 Razpakiranje in priključitev na električno omrežje

Napravo previdno vzemite iz embalaže. Vse embalažne materiale shranite za kasnejši transport ali shranjevanje.
Stroj postavite na stabilno, ravno površino.
Priključite vtič nožnega regulatorja v vtičnico za nožni regulator na stroju.
Insert the machine's power cord into the power supply socket, then plug the other end into a suitable wall outlet.

Diagram showing power cord and foot controller connection points on a Brother LS2125 sewing machine.

Slika 1.1: Illustration of connecting the power cord and foot controller to the sewing machine. Ensure all connections are secure before powering on.

1.2 Navijanje vretenca

Na zatič za navijanje položite tuljavo niti.
Guide the thread through the upper thread guide and around the pre-tension disc.
Insert the empty bobbin onto the bobbin winder spindle.
Wrap the thread clockwise around the bobbin several times.
Potisnite vreteno navijala vretenca v desno.
Press the foot controller gently to start winding. Stop when the bobbin is full and push the spindle back to the left.
Trim the thread.

Step-by-step diagram for winding a bobbin on a Brother LS2125 sewing machine.

Slika 1.2: Visual guide for correctly winding the bobbin. Proper bobbin winding is crucial for consistent stitch quality.

1.3 Vdevanje zgornje niti

Dvignite iglo v najvišji položaj tako, da ročno kolo obrnete proti sebi.
Dvignite ročico stiskalne noge.
Namestite tuljavo niti na zatič za tuljavo.
Napeljite nit skozi zgornje vodilo niti.
Bring the thread down the right channel, up the left channel, and through the take-up lever from right to left.
Nadaljujte z vodenjem niti navzdol do vodila niti na igelni palici.
Iglo napeljite od spredaj nazaj. Skozi uho igle povlecite približno 6 cm niti.

Detailed diagram showing the upper threading path for a Brother LS2125 sewing machine.

Slika 1.3: The complete upper threading path. Incorrect threading can lead to skipped stitches or tangled thread.

1.4 Vstavljanje vretenca

Odprite pokrov vretenca.
Vstavite navito vreteno v vreteno tako, da se nit odvija v nasprotni smeri urinega kazalca.
Guide the thread into the tension spring slot.
Zaprite pokrov vretenca.
Hold the upper thread lightly and turn the handwheel towards you to bring the bobbin thread up through the needle plate hole.
Povlecite obe niti (zgornjo in vretensko) pod tačko in proti zadnjemu delu stroja.

2. Upravljanje šivalnega stroja

This section covers the basic operations and functions of your Brother LS2125, LS2125i, or LS2129 sewing machine.

2.1 Izbira šivov

Turn the stitch selector dial to choose your desired stitch pattern (e.g., straight stitch, zigzag stitch).
Refer to the stitch chart on the machine or in this manual for available patterns.

Close-up of the stitch selector dial on a Brother LS2125 sewing machine.

Slika 2.1: The stitch selector dial. Rotate this dial to choose from various stitch patterns.

2.2 Prilagajanje dolžine in širine šiva

Use the stitch length dial to adjust the length of your stitches. Longer stitches are suitable for basting, shorter for fine work.
Use the stitch width dial (if available for the selected stitch) to adjust the width of zigzag or decorative stitches.

2.3 Osnove šivanja

Place the fabric under the presser foot, aligning the edge with a seam guide line on the needle plate.
Spustite ročico stiskalne noge.
Gently press the foot controller to start sewing. The machine will begin stitching.
Guide the fabric gently with both hands, but do not push or pull it forcefully.
Za vzvratno šivanje (za zavarovanje šivov) pritisnite in držite ročico/gumb za vzvratno šivanje.
When finished, raise the needle to its highest position, raise the presser foot, and pull the fabric towards the back.
Niti odrežite z rezalnikom niti na stroju ali škarjami.

View of the needle, presser foot, and feed dogs during sewing on a Brother LS2125 machine.

Slika 2.2: The primary sewing area, showing the needle, presser foot, and feed dogs. Always keep fingers clear of the needle.

3. Vzdrževanje in nega

Redno vzdrževanje zagotavlja dolgo življenjsko dobo in optimalno delovanje vašega šivalnega stroja.

3.1 Cleaning the Bobbin Area

Izklopite stroj in ga izvlecite iz vtičnice.
Odstranite iglo in tačko.
Open the bobbin cover plate and remove the bobbin.
Remove the bobbin case and the feed dog cover plate (if applicable).
Use the small brush provided with your machine to remove lint and dust from the bobbin case, feed dogs, and surrounding areas.
Ponovno sestavite vse dele.

Diagram illustrating how to clean the bobbin area of a Brother LS2125 sewing machine.

Slika 3.1: Steps for cleaning the bobbin and feed dog area. Regular cleaning prevents thread jams and improves stitch quality.

3.2 Zamenjava igle

Izklopite stroj in ga odklopite.
Dvignite iglo v najvišji položaj.
Odvijte iglo clamp Vijak privijte tako, da ga zavrtite v nasprotni smeri urinega kazalca.
Odstranite staro iglo.
Vstavite novo iglo z ravno stranjo obrnjeno proti zadnji strani stroja in jo potisnite navzgor, kolikor gre.
Zategnite iglo klamp varno privijte.

3.3 Mazanje (če je primerno)

Your Brother LS2125 series machine is designed to require minimal oiling. Refer to your specific model's detailed manual for oiling points, if any are recommended. Over-oiling can cause issues.

4. Odpravljanje pogostih težav

This section provides solutions for common problems you might encounter during operation.

Težava	Možen vzrok	rešitev
Preskočeni šivi	Napačna igla, upognjena igla, nepravilno vdevanje niti, napačna velikost igle za blago.	Replace needle with correct type/size. Re-thread machine completely.
Prekinitev niti	Nepravilna napetost, slaba kakovost niti, upognjena igla, nepravilno napeljevanje niti, odrgnine na igelni plošči.	Adjust tension. Use good quality thread. Replace needle. Re-thread. Check for burrs.
Tkanina se ne hrani	Presser foot not lowered, feed dogs lowered, lint in feed dogs.	Lower presser foot. Ensure feed dogs are up. Clean feed dogs.
Stroj se ne zažene	Power cord not plugged in, foot controller not connected, main power switch off.	Check all power connections. Ensure power switch is ON.

5. Specifikacije

General specifications for the Brother LS2125, LS2125i, and LS2129 sewing machine models.

Številke modelov: LS2125, LS2125i, LS2129
Funkcije šivanja: 10-14 built-in stitches (varies by model), including straight, zigzag, and buttonhole.
Vrsta igle: HAx1 (130/705H)
Tip bobina: Class 15 (metal or plastic)
Napajanje: AC 110-120V, 60Hz
Dimenzije (pribl.): 15.4" W x 6.7" D x 11.6" H (39 cm x 17 cm x 29.5 cm)
Teža (pribl.): 13 lbs (5.9 kg)
Največja hitrost šivanja: 750 šivov na minuto

6. Garancija in podpora

For specific warranty information and customer support, please refer to the warranty card included with your original purchase or visit the official Brother support webmesto.

Pokritost garancije: Typically includes limited warranty on parts and labor. Duration may vary by region and model.
Podpora strankam: Contact Brother customer service for technical assistance, parts, or service.
Spletni viri: Obisk www.brother-usa.com/support for FAQs, video tutorials, and downloadable manuals.