PROEL V10PLUS Monitor Speaker User Manual

1. Uvod

The PROEL V10PLUS is a high-performance, bi-amplified 2-way monitor speaker designed for professional audio applications. It integrates a powerful 600W Class D + AB amplifier with Switch-Mode Power Supply (SMPS) technology, ensuring efficient and clear sound reproduction. Its lightweight, reinforced polypropylene cabinet and ergonomic handle provide excellent portability, while its trapezoidal shape allows for versatile use as a stage monitor or for fixed installations.

2. Ključne značilnosti

• Bi-amplified 2-way design: Features a 1-inch neodymium compression driver and a 10-inch woofer with a 2-inch voice coil.
• Močna Ampolajšanje: 600W total power (Class D + AB amplifier with SMPS).
• Integrated Active Processor: Includes a dual LIMITER circuit for undistorted sound even at high levels.
• Vsestranski vložki: MIC/LINE input with two-band EQ for flexible audio source connection.
• Kazalniki stanja: Front LED for power (ON) and signal/clip indication.
• Visok izhod: Maximum SPL of 123dB.
• Širok frekvenčni odziv: 60Hz - 20kHz.
• Vzdržljiva in prenosna zasnova: Ultralight reinforced polypropylene cabinet with a comfortable carry handle.
• Prilagodljiva postavitev: Trapezoidal shape for use as a stage monitor and four M10 suspension points for installation.
• Kompakten in lahek: Product dimensions of 25 x 35 x 30 cm and a total weight of 10 kg.

3. Nastavitev

Proper setup ensures optimal performance and longevity of your PROEL V10PLUS speaker. Follow these steps for initial configuration:

3.1 Razpakiranje in pregled

Carefully remove the speaker from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. Retain the original packaging for future transport or storage.

3.2 Namestitev

The V10PLUS is designed for various applications:

• Talni monitor: Position the speaker on the floor using its angled profile za stage spremljanje.
• Stojalo za zvočnike: Utilize the integrated pole mount socket on the bottom of the speaker to mount it on a standard speaker stand.
• Vzmetenje: Use the four M10 suspension points for fixed installations. Ensure proper rigging hardware and safety procedures are followed by qualified personnel.

Figure 3.2.1: PROEL V10PLUS in stage monitor position.

3.3 Povezave

Refer to the rear panel image for connection points.

Slika 3.3.1: Priključki in krmilniki na zadnji plošči.

1. Napajalni priključek: Connect the supplied AC power cable to the POWER input on the rear panel and then to a suitable electrical outlet. Ensure the voltage matches the speaker's requirements (220-240V~ 50/60Hz).
2. Avdio vhod: Connect your audio source (mixer, microphone, instrument) to the INPUT section. The V10PLUS features a combo XLR/TRS input.
• For microphone signals, use the MIC/LINE switch to select 'MIC'.
• For line-level signals (e.g., from a mixer), select 'LINE'.
3. Izhod povezave: The LINK output (XLR) allows you to send the input signal to another V10PLUS speaker or another audio device.

4. Navodila za uporabo

Once connected, follow these steps to operate your PROEL V10PLUS speaker:

1. Vklop: Ensure all connections are secure and the LEVEL knob is set to minimum. Flip the POWER switch to the 'ON' position. The front LED will illuminate to indicate power.
2. Izbira vnosa: Set the MIC/LINE switch according to your input source (MIC for microphones, LINE for line-level devices).
3. Prilagoditev glasnosti: Slowly increase the LEVEL knob to achieve the desired volume. Monitor the front LED: it should primarily show 'SIGNAL' (green). If it frequently shows 'CLIP' (red), reduce the input level from your source or the speaker's LEVEL knob to prevent distortion.
4. Nadzor tonov: Use the HIGH and LOW EQ knobs to adjust the treble and bass frequencies to suit your preference or acoustic environment.
5. Ugasniti: Before disconnecting power or cables, turn the LEVEL knob to minimum and then flip the POWER switch to 'OFF'.

5. Vzdrževanje

Regular maintenance helps preserve the performance and appearance of your speaker.

• Čiščenje: Use a soft, dry cloth to clean the cabinet. For stubborn dirt, a slightly damp cloth with mild soap can be used, followed by a dry cloth. Do not use abrasive cleaners, solvents, or waxes.
• Čiščenje rešetke: The metal grille can be gently cleaned with a soft brush or vacuum cleaner to remove dust.
• Shranjevanje: When not in use for extended periods, store the speaker in a dry, cool place, ideally in its original packaging or a protective cover, away from direct sunlight and extreme temperatures.
• Pregled kabla: Periodically check all power and audio cables for any signs of wear, cuts, or damage. Replace damaged cables immediately.

Caution: Do not attempt to open the speaker cabinet. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.

6. Odpravljanje težav

This section addresses common issues you might encounter with your PROEL V10PLUS speaker.

If the problem persists after trying these solutions, please contact PROEL customer support or an authorized service center.

7. Specifikacije

Detailed technical specifications for the PROEL V10PLUS speaker:

8. Garancija in podpora

8.1 Informacije o garanciji

This PROEL V10PLUS speaker comes with an extended warranty. For detailed information regarding warranty terms, conditions, and registration, please refer to the official PROEL webali se obrnite na pooblaščenega prodajalca. Shranite dokazilo o nakupu za uveljavljanje garancije.

8.2 Podpora strankam

For technical assistance, service, or spare parts, please contact PROEL customer support. You can find contact information and additional resources, including FAQs and product documentation, on the official PROEL webspletno mesto (www.proel.com). Please have your product model number (V10PLUS) and serial number ready when contacting support.