Airam LED Cabinet Lamp 1.2W Navodila za uporabo

1. Uvod

This manual provides essential instructions for the safe and efficient use of your Airam LED Cabinet Lamp 1.2W. This battery-operated lamp features a PIR motion sensor, automatically illuminating when motion is detected, making it ideal for cabinets, drawers, and other enclosed spaces. Please read this manual thoroughly before installation and operation.

2. Nastavitev

2.1 Vsebina paketa

Preden nadaljujete, se prepričajte, da so prisotne vse komponente:

• Airam LED Cabinet Lamp 1.2 W
• Mounting hardware (screws or adhesive strips, typically included in packaging)

Figure 1: Airam LED Cabinet Lamp in its retail packaging, showing the lamp and typical mounting accessories.

2.2 Namestitev baterije

The Airam LED Cabinet Lamp requires 4 x AA 1.5V batteries (not included).

1. Locate the battery compartment cover on the back or side of the lamp.
2. Potisnite ali odpnite pokrov, da odprete predal.
3. Insert 4 AA batteries, ensuring correct polarity (+ and - terminals match the markings inside the compartment).
4. Trdno zaprite pokrov prostora za baterije.

2.3 Montaža Lamp

Lamp can be mounted using screws or adhesive strips, depending on the included hardware and your preference. Choose a location where the motion sensor has a clear line of sight to the area where movement is expected (e.g., inside a cabinet door, above a drawer).

Slika 2: Spredaj view of the Airam LED Cabinet Lamp, highlighting the central motion sensor.

Using Screws (if applicable):

1. Označite želeni položaj montaže.
2. Drill pilot holes if necessary, matching the lamp's mounting holes.
3. Zavarujte lamp z uporabo priloženih vijakov.

Using Adhesive Strips (if applicable):

1. Površino za montažo temeljito očistite, da se prepričate, da je suha in brez prahu ali maščobe.
2. Peel the protective backing from the adhesive strips.
3. Trdno pritisnite lamp onto the desired surface for at least 30 seconds.

3. Delovanje

The Airam LED Cabinet Lamp is designed for automatic operation using its integrated PIR (Passive Infrared) motion sensor.

1. Once batteries are installed and the lamp is mounted, it will enter standby mode.
2. When the PIR motion sensor detects movement within its range (e.g., opening a cabinet door or drawer), the LED lights will automatically turn on.
3. Lamp will remain illuminated for approximately 25 seconds after motion is detected.
4. If no further motion is detected within this period, the lamp will automatically turn off to conserve battery power.
5. If continuous motion is detected, the lamp will remain on until motion ceases for 25 seconds.

Opomba: Ensure the motion sensor is not obstructed for optimal performance.

4. Vzdrževanje

4.1 Zamenjava baterije

When the light output diminishes or the lamp stops functioning, it is time to replace the batteries. Refer to section 2.2 Namestitev baterije za podrobna navodila.

• Vedno zamenjajte vse 4 baterije AA hkrati.
• Ne mešajte starih in novih baterij ali različnih vrst baterij.
• Izrabljene baterije zavrzite odgovorno v skladu z lokalnimi predpisi.

4.2 Čiščenje

Lamp is constructed from polycarbonate and ABS plastic. To clean the lamp:

• Površino obrišite z mehko, suho ali rahlo vlažno krpoamp krpo.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic finish or the sensor.
• Ensure no liquid enters the battery compartment or sensor area.

5. Odpravljanje težav

6. Specifikacije

7. Garancija in podpora

Specific warranty information may vary by region and retailer. Please refer to your purchase documentation or contact your point of sale for details regarding warranty coverage.

For technical support or further assistance, please contact the manufacturer, Bot Lighting, or your retailer. Keep your purchase receipt as proof of purchase.