Uvod
Hvala za nakupasing the LUXMAN L-505V Integrated Amplifier. This manual provides essential information for the safe and efficient operation of your new audio component. Please read this manual thoroughly before using the amplifier and retain it for future reference.
Varnostni ukrepi
Za zagotovitev varnega delovanja in preprečevanje poškodb upoštevajte naslednje varnostne ukrepe:
- Enote ne izpostavljajte dežju ali vlagi.
- Ne odpirajte casing. Vsa servisna dela prepustite usposobljenemu osebju.
- Zagotovite ustrezno prezračevanje; ne blokirajte prezračevalnih odprtin.
- Uporabljajte le navedeno napajalno enoto voltage.
- Izogibajte se postavljanju enote v bližino virov toplote ali na neposredno sončno svetlobo.
- Med nevihtami ali če naprave dalj časa ne uporabljate, izključite napajalni kabel.
Nastavitev
1. Razpakiranje
Previdno odstranite ampVzemite iz embalaže. Vso embalažo shranite za kasnejši transport ali shranjevanje.
2. Umestitev
Postavite amplifier on a stable, level surface away from direct sunlight, heat sources, and excessive dust or humidity. Ensure adequate space around the unit for proper ventilation.
3. Priključitev avdio virov
Connect your audio source components (e.g., CD player, turntable, tuner) to the corresponding input jacks on the rear panel of the L-505V using high-quality RCA cables.
- CD vhod: For CD players or other line-level sources.
- Phono vhod: For turntables. Ensure your turntable has a compatible cartridge (MM/MC).
- Line 1/2/3 Inputs: For additional line-level sources.
4. Priključitev zvočnikov
Connect your speakers to the speaker terminals on the rear panel. Observe correct polarity (+ to + and - to -) for each speaker. The L-505V supports two sets of speakers (A and B).
- Zagotovite ampPreden vzpostavite povezave, je napajalnik izklopljen.
- Strip approximately 10-15mm of insulation from the speaker wire ends.
- Loosen the binding posts, insert the bare wire, and tighten securely.
- Repeat for all speaker connections, ensuring correct left/right and positive/negative orientation.
5. Napajalni priključek
After all audio and speaker connections are made, connect the supplied power cord to the AC inlet on the rear panel and then to a suitable wall outlet.
Navodila za uporabo
1. Vklop/izklop
Pritisnite MOČ gumb na sprednji plošči, da vklopite amplifier on or off. The power indicator will illuminate when the unit is on.
2. Izbira vhoda
Uporabite IZBORNIK VHODA knob or buttons to choose the desired audio source (e.g., CD, Phono, Line 1).
3. Nadzor glasnosti
Prilagodite skupno raven zvoka z uporabo velikega GLASNOST knob. Start at a low volume and gradually increase to a comfortable listening level.
4. Kontrole tonov
The L-505V features BASS in TREPLE controls to fine-tune the sound. Adjust these to your preference. For a pure sound, set them to their center (flat) position or engage the TONSKI PORAZ funkcijo, če je na voljo.
5. Nadzor ravnotežja
The RAVNOTEŽJE control adjusts the relative volume between the left and right speakers. Set it to the center position for equal output.
6. Izhod za slušalke
Priključite slušalke na TELEFONI jack on the front panel. This will typically mute the main speaker outputs.
Vzdrževanje
1. Čiščenje
Obrišite zunanjost amplifier with a soft, dry cloth. For stubborn dirt, use a cloth lightly dampened with water or a mild, non-abrasive cleaner. Do not use harsh chemicals or solvents.
2. Shranjevanje
If storing the unit for an extended period, disconnect the power cord and store it in a cool, dry place, preferably in its original packaging.
Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Brez moči | Napajalni kabel odklopljen; Okvara vtičnice; Amppregorela varovalka za vžig. | Check power cord connection; Try a different outlet; Contact service for fuse replacement. |
| Brez zvoka | Incorrect input selected; Volume too low; Speaker cables disconnected; Mute function active. | Select correct input; Increase volume; Check speaker connections; Deactivate mute. |
| Popačen zvok | Input level too high; Speaker impedance mismatch; Damaged cables. | Reduce source volume; Ensure speakers match amplifier impedance; Check/replace cables. |
| Sound from only one channel | Balance control off-center; Loose speaker cable; Faulty source cable. | Adjust balance control; Check speaker connections; Check/replace source cables. |
If the problem persists after trying these solutions, please contact LUXMAN customer support or an authorized service center.
Tehnični podatki (običajno)
Opomba: Specifikacije se lahko spremenijo brez predhodnega obvestila zaradi izboljšanja izdelka.
- Nazivni izhod: 100W + 100W (8 ohms), 150W + 150W (4 ohms)
- Vhodna občutljivost/impedanca:
- PHONO (MM): 2.5mV / 47k ohms
- PHONO (MC): 0.3mV / 100 ohms
- LINE: 180mV / 47k ohms
- Frekvenčni odziv:
- PHONO: 20Hz - 20kHz (±0.5dB)
- LINE: 20Hz - 100kHz (±3dB)
- Skupno harmonično popačenje: Less than 0.007% (1kHz, 8 ohms)
- Razmerje med signalom in šumom:
- PHONO (MM): >91dB
- PHONO (MC): >75dB
- LINIJA: >105dB
- Poraba energije: 270W (max), 0.4W (standby)
- Dimenzije (Š x V x G): 440 x 178 x 454 mm (including front panel knobs and rear terminals)
- Teža: 22.5 kg
Garancija in podpora
LUXMAN products are designed for reliability and performance. This product comes with a limited warranty. Please refer to the separate warranty card included with your purchase for specific terms and conditions.
For technical support, service, or inquiries, please contact your authorized LUXMAN dealer or visit the official LUXMAN webspletno mesto: