Polar 91053127

Polar Handlebar Mount for V650 and M450 Cycling Computers

Model: 91053127

1. Uvod

The Polar Handlebar Mount is designed to provide a secure and convenient way to attach your compatible Polar cycling computer or sports watch to your bicycle's handlebars. This allows for easy visibility of your training data, such as speed, distance, and heart rate, during your rides. This universal mount is compatible with various Polar wrist units, including the V650 and M450 models.

Please read these instructions carefully before installation and use to ensure proper setup and optimal performance.

2. Nastavitev in namestitev

2.1 Vsebina paketa

  • Polar Handlebar Mount
  • Zip ties (typically two or more for secure fastening)

2.2 koraki namestitve

Follow these steps to securely attach the handlebar mount to your bicycle:

  1. Postavite nosilec: Place the Polar Handlebar Mount on a suitable section of your bicycle's handlebars. Ensure it is positioned centrally and does not obstruct your view or access to other controls.
  2. Zavarujte z zadrgami: Thread the provided zip ties through the designated slots on the mount and around the handlebar. Pull the zip ties tight to secure the mount firmly in place.
    Polar Handlebar Mount installed on a bicycle handlebar with zip ties

    Image: The Polar Handlebar Mount shown attached to a bicycle handlebar using two black zip ties. The mount is positioned centrally on the bar, with the Polar logo visible on the side. This image illustrates the correct method for securing the mount.

  3. Odvečno obrezovanje: Once the mount is firmly secured and does not move, trim any excess length from the zip ties using scissors or a cutting tool. Ensure no sharp edges remain.
  4. Test stabilnosti: Gently try to move the mount by hand to confirm it is stable and will not shift during your ride. Adjust the zip ties if necessary.

Pomembno: Ensure the mount is extremely stable. A loose mount could lead to your device falling off during a ride.

3. Navodila za uporabo

3.1 Attaching Your Polar Device

The Polar Handlebar Mount is designed to hold your Polar cycling computer or sports watch securely.

  1. Priprava naprave: Remove your Polar device from its wrist strap.
  2. Align Device: Align the back of your Polar device with the mounting grooves on the handlebar mount.
  3. Slide and Secure: Gently slide the device into the mount until it clicks into place. Ensure it is fully seated and does not wobble.

3.2 Detaching Your Polar Device

To remove your Polar device from the mount:

  1. Press Release Mechanism: Locate the release tab or button on the back or side of your Polar device (refer to your device's specific manual for exact location).
  2. Slide Out: While pressing the release, gently slide the device out of the handlebar mount.

Pozor: Do not force the device into or out of the mount. If it feels stuck, re-check alignment or the release mechanism.

4. Vzdrževanje

  • Čiščenje: Clean the mount periodically with a damp krpo. Izogibajte se uporabi agresivnih kemikalij ali abrazivnih čistil, saj lahko poškodujejo plastiko.
  • Pregled: Regularly inspect the mount and zip ties for any signs of wear, cracks, or damage. Replace the mount or zip ties if any damage is observed to prevent your device from falling.
  • Shranjevanje: Ko nosilca dlje časa ne uporabljate, ga shranite na hladnem in suhem mestu, stran od neposredne sončne svetlobe.

5. Odpravljanje težav

TežavaMožen vzrokrešitev
Mount is loose on handlebar.Zip ties are not tight enough or are damaged.Tighten the existing zip ties or replace them with new ones. Ensure they are pulled very taut.
Device does not fit into the mount.Incorrect device model or improper alignment.Verify your Polar device is compatible with this mount (e.g., V650, M450). Ensure the device is aligned correctly with the mount's grooves before sliding.
Device falls out of the mount during use.Device not fully secured or mount is damaged.Ensure the device clicks firmly into place. Inspect the mount for any cracks or broken tabs that might prevent a secure fit. Replace if damaged.

6. Specifikacije

  • Model: 91053127
  • Znamka: Polar
  • Material: Plastika
  • barva: Črna
  • Vrsta pritrditve: Krmilo
  • Združljive naprave: Polar V650, Polar M450, and other compatible Polar sports watches/cycling computers.
  • Dimenzije (D x Š x V): Približno 30 x 10 x 5 cm (11.8 x 3.9 x 2.0 palca)
  • Teža: Približno 40.82 gramov (1.44 unč)
  • Lastnosti: Nastavljiv viewing angle (via device rotation), secure zip-tie fastening.

7. Podpora in garancija

For further assistance, product information, or warranty details, please visit the official Polar support webspletno mesto ali se obrnite na njihovo službo za stranke.

Polar Official Support

Prosimo, shranite dokazilo o nakupu za morebitne garancijske zahtevke.

© 2023 Polar Electro Oy. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.