Uvod
Hvala za nakupasing the WulaWindy Digital Wooden LED Alarm Clock. This manual provides detailed instructions for setting up, operating, and maintaining your new clock. Please read this manual thoroughly before use to ensure proper function and to maximize your product experience.
Varnostne informacije
- Naprave ne izpostavljajte ekstremnim temperaturam, neposredni sončni svetlobi ali visoki vlažnosti.
- Avoid dropping or subjecting the clock to strong impacts.
- Use only the provided USB power cable.
- Hraniti izven dosega otrok.
- Naprave ne poskušajte razstavljati ali popravljati sami. Če potrebujete servis, se obrnite na podporo strankam.
Vsebina paketa
- WulaWindy Digital Wooden LED Alarm Clock
- USB napajalni kabel
- Uporabniški priročnik
Konec izdelkaview
The WulaWindy Digital Wooden LED Alarm Clock features a minimalist cube design with a clear LED display. It shows time, date, and temperature, and includes multiple alarm settings and brightness adjustment.
Spredaj View
Slika 1: Spredaj view of the clock, showing the digital time display.
Nazaj View in Kontrole
Figure 2: Rear panel with control buttons and switches.
Figure 3: Detailed diagram of clock dimensions and control labels.
Ključne kontrole:
- Gumb SET: Uporablja se za vnos in potrditev nastavitev.
- Gumb GOR: Used to increase values or navigate options.
- Gumb DOL: Used to decrease values or navigate options, also activates sound control.
- Brightness Adjustment Roller: Located on the back, used to manually adjust display brightness.
- Alarm Switches (1-2-3): Individual switches to enable/disable each alarm.
- 12/24 Hour Setting Switch: Preklaplja med 12-urnim in 24-urnim formatom časa.
- Vhodna vrata: For connecting the USB power cable.
- PONASTAVITEV Luknja: A small pinhole to reset all settings to factory defaults.
Nastavitev
Napajanje ure
The clock can be powered via the included USB cable. It also supports 3 AAA batteries (not included) for temporary backup during power outages, but continuous battery use is not recommended due to high power consumption.
- Connect the USB power cable to the input port on the back of the clock.
- Plug the other end of the USB cable into a USB power adapter (not included) or a powered USB port (e.g., on a computer or TV box).
- Zaslon se bo prižgal, kar pomeni, da je ura vklopljena.
- Izbirno: Insert 3 AAA batteries into the battery compartment for power backup.
Delovanje
The clock features three buttons on the back: SET, UP, and DOWN. These buttons are used for all settings. A long press (holding) or short press (pressing) will activate different functions.
Nastavitev datuma in časa
- Držite gumb SET for approximately 3 seconds to enter time/date setting mode.
- Nastavitev leta: The year will flash. Use the UP/DOWN buttons to adjust the year. Press SET to confirm and move to the next setting.
- Nastavitev meseca: Adjust the month with UP/DOWN. Press SET.
- Nastavitev dneva: Adjust the day with UP/DOWN. Press SET.
- 12H/24H zaslon: Use UP/DOWN to toggle between 24H and 12H format. Press SET.
- Nastavitev ure: Adjust the hour with UP/DOWN. If in 12H mode, a small dot next to the hour indicates PM. Press SET.
- Nastavitev minut: Adjust the minutes with UP/DOWN. Press SET.
- Continue pressing SET to cycle through alarm settings (see below) and power saving mode until the clock returns to normal display.
Nastavitev alarmov
The clock supports three independent alarms (A1, A2, A3).
- Držite gumb SET for approximately 3 seconds to enter setting mode.
- After setting the time, you will reach the alarm settings.
- Alarm 1 (A1) On/Off: The display will show 'oNA1' (On) or '--A1' (Off). Use UP/DOWN to toggle. Press SET.
- Alarm 1 Hour: Adjust the hour for Alarm 1 with UP/DOWN. Press SET.
- Alarm 1 Minutes: Adjust the minutes for Alarm 1 with UP/DOWN. Press SET.
- Repeat steps for Alarm 2 (A2) and Alarm 3 (A3).
- To enable or disable an alarm quickly, use the physical switches on the back of the clock labeled 'ALARM 1-2-3'.
Figure 4: Brightness levels from L0 (dim) to L3 (bright).
Nastavitev svetlosti
The clock offers adjustable brightness levels.
- Ročna nastavitev: Use the brightness adjustment roller on the back of the clock to set the desired brightness level (L0 to L3).
- Samodejno zatemnitev: The display automatically dims to the lowest setting (L0) between 6 PM and 7 AM if the time is set correctly in 12H mode with PM indicated.
Display Modes (dP-1 / dP-2)
You can choose how the clock displays information.
- Na kratko pritisnite gumb SET (do not hold).
- The display will show 'dP-1' or 'dP-2'. Use UP/DOWN to select:
- dP-1: Cycles between time (10 seconds), date (3 seconds), and temperature (2 seconds).
- dP-2: Displays only the time continuously.
- Pritisnite SET za potrditev izbire.
Figure 5: Sound control feature, activating display with sound or touch.
Sound Control / Power Saving Mode
This mode turns off the display after 15 seconds to save power. The display will reactivate when a sound (e.g., a clap) or touch is detected.
- Držite gumb DOL približno 3 sekundi.
- The display will show 'oNSd' (On) or '--Sd' (Off). Use UP/DOWN to toggle.
- Press DOWN again to confirm and exit.
Temperature Units (Celsius/Fahrenheit)
- Short press the UP button (do not hold).
- The display will show 'C' or 'F'. Use UP/DOWN to toggle between Celsius and Fahrenheit.
- The setting will automatically save after a few seconds.
Funkcija dremeža
When an alarm sounds, press any button on the top of the clock to activate the snooze function. The alarm will sound again after a short interval.
Vzdrževanje
- Uro očistite z mehko, suho krpo. Ne uporabljajte abrazivnih čistil ali topil.
- Ensure the USB port and battery compartment remain free of dust and debris.
- If storing the clock for an extended period, remove the AAA batteries to prevent leakage.
Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Prikaz ure je izklopljen. | No power; Power saving mode is active. | Ensure USB cable is securely connected to a power source. Tap the clock or make a sound to activate display if in power saving mode. |
| Clock loses time or settings. | Power interruption; No backup batteries or batteries are depleted. | Ensure continuous USB power. Install fresh AAA batteries for backup. Reset time if necessary. |
| Alarm se ne oglasi. | Alarm is not enabled; Alarm volume is too low. | Check the physical alarm switch on the back. Ensure alarm time is set correctly. (Note: Volume control is mentioned in feature bullets but not explicitly detailed in reviews for setting, assume fixed or adjusted via general settings if available). |
| Zaslon je presvetel/pretemn. | Nastavitev svetlosti ni optimalna. | Adjust the brightness using the roller on the back of the clock. |
| Odčitavanje temperature je netočno. | Environmental factors; Sensor calibration. | Ensure the clock is not placed near heat sources or in direct sunlight. The temperature sensor provides an approximate ambient reading. |
Specifikacije
- Znamka: WulaWindy
- Model: 8541847779
- Vrsta zaslona: Digitalna LED
- vir energije: Corded Electric (USB), 3x AAA batteries (backup only, not included)
- Funkcije: Time (12/24H), Date, Temperature (C/F), 3 Alarms, Brightness Adjustment, Sound Control
- Material: Wood (Frame)
- Dimenzije izdelka: 3.54"W x 3.14"H (approx. 2.5" x 2.5" x 2.5" cube based on images/reviews)
- Teža artikla: 0.3 funta (4.8 unč)
Garancija in podpora
WulaWindy products are manufactured with quality in mind. For any questions, technical support, or warranty claims, please refer to your purchase platform or contact WulaWindy customer service directly. Please retain your proof of purchase for warranty purposes.