Uvod
This manual provides essential instructions for the safe and efficient use of your Lepro Industrial LED Desk Lamp. Ta vsestranski lamp features an adjustable arm and a sturdy clamp, making it suitable for various environments such as study desks, office workstations, or bedside tables. It is designed to accommodate an E27 bulb (not included), allowing you to choose the light source that best fits your needs.
Pred namestitvijo in uporabo natančno preberite ta priročnik in ga shranite za poznejšo uporabo.
Image: The Lepro Industrial LED Desk Lamp providing illumination on a modern desk setup.
Varnostna navodila
- Read all instructions carefully before using the lamp.
- Ensure the power supply is disconnected before installing, cleaning, or replacing the bulb.
- Uporabljajte samo žarnice z vznožkom E27 in največjo močjotage 40W.
- Ne uporabljajte lamp s poškodovanim napajalnim kablom ali vtičem.
- Ta izdelek je namenjen samo za uporabo v zaprtih prostorih. Ne izpostavljajte ga vodi ali visoki vlažnosti.
- Obdrži lamp stran od vnetljivih materialov.
- Ne poskušajte razstaviti ali popraviti lamp sami. Za servis se obrnite na usposobljeno osebje.
Vsebina paketa
Prosimo, preverite paket za naslednje artikle:
- Lepro Industrial LED Desk Lamp (main unit with clamp)
- Uporabniški priročnik
Opomba: Žarnica E27 ni priložena in jo je treba kupiti posebej.
Nastavitev in namestitev
Follow these steps to assemble and install your desk lamp:
- Pritrdite Clamp: Varno pritrdite clamp to a desk or shelf edge. The clamp can accommodate surfaces up to 5.4 cm thick. Tighten the screw until the clamp is firmly in place, ensuring stability for both vertical and horizontal mounting.
- Sestavite Lamp Vodja: Namestite lamp cover onto the upper part of the main unit. Twist the cover in the direction indicated (usually clockwise) to tighten it securely.
- Insert the Arm: Previdno vstavite lamp arm into the designated joint on the clamp base. Ensure it clicks or locks into place for stable positioning.
- Namestite žarnico: Zagotovite lamp is unplugged from the power outlet. Screw an E27 base bulb (not included) into the lamp vtičnico. Ne zategujte premočno.
- Povežite se z napajanjem: Priključite lampnapajalni kabel v ustrezno električno vtičnico.
Image: The bidirectional clamp allows for both vertical and horizontal mounting on surfaces up to 5.4 cm thick.
Slika: The lamp requires an E27 bulb, which is not included. Various E27 bulb types can be used.
Navodila za uporabo
Vklop/izklop: Locate the rocker switch on the power cord. Press the switch to turn the lamp vklop ali izklop.
Prilagoditev svetlobnega kota: Lamp features a highly flexible and adjustable arm with multiple joints. You can rotate the lamp head up to 300 degrees and adjust the arm at various angles (e.g., 120 degrees at the main joints, 360 degrees at the base clamp) to direct light precisely where needed. The spring-balanced arm ensures the lamp stays in your desired position.
Slika: The lamp's flexible arm and head allow for multi-angle adjustment to optimize lighting.
Vzdrževanje
Čiščenje: Za čiščenje lamp, ensure it is unplugged and cool. Wipe the surfaces with a soft, dry cloth. Do not use abrasive cleaners, solvents, or liquids, as these may damage the finish or electrical components.
Zamenjava žarnice: Before replacing the bulb, ensure the lamp is unplugged and the old bulb has cooled down completely. Carefully unscrew the old E27 bulb and screw in a new E27 bulb (maximum 40W). Ensure the new bulb is securely seated before plugging the lamp nazaj noter.
Odpravljanje težav
- Lamp ne vklopi:
- Preverite, ali je napajalni kabel pravilno priključen v vtičnico.
- Ensure the rocker switch on the cord is in the 'ON' position.
- Verify that the E27 bulb is correctly installed and not faulty. Try testing with a known working bulb.
- Preverite vtičnico tako, da vanjo priključite drugo napravo.
- Svetloba utripa:
- Prepričajte se, da je žarnica trdno privita.
- The bulb may be faulty or incompatible. Replace it with a new E27 bulb.
- Check for loose connections in the power cord or outlet.
- Lamp je nestabilen:
- Zagotovite clamp is tightened securely to the desk or surface.
- Verify that the surface thickness is within the maximum 5.4 cm limit for the clamp.
- Preverite, ali je lamp arm is properly inserted into the clamp skupni.
Specifikacije
| Funkcija | Specifikacija |
|---|---|
| Številka modela | 3100027-DW-EU |
| Dimenzije (D x Š x V) | 38 x 15 x 27 cm |
| Teža | 900 g |
| Podnožje žarnice | E27 |
| Max Wattage | 40 vatov |
| Vir napajanja | Električni na kabel |
| Material | Kovina |
| Tip stikala | Preklopno stikalo |
| voltage | 240 volta |
| Max Clamp Debelina | 5.4 cm |
| Dolžina napajalnega kabla | Približno 1.6 metrov |
Image: Product dimensions and key features like E27 bulb base and power cord length.
Garancija in podpora
Garancija: This Lepro Industrial LED Desk Lamp comes with a 1-year warranty for replacement parts in the EU, covering manufacturing defects from the date of purchase. This warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
Podpora strankam: For technical assistance, troubleshooting, or warranty claims, please contact Lepro customer support through the retailer where the product was purchased or visit the official Lepro website for contact information. Please have your model number (3100027-DW-EU) and proof of purchase ready when contacting support.