Navodila za uporabo računalniškega pisarniškega stola Amazon Basics Mid-Back (model GF-9390M-1)

Uvod

This manual provides essential instructions for the assembly, operation, and maintenance of your Amazon Basics Mid-Back Office Computer Task Desk Chair. Please read all instructions carefully before assembly and use to ensure proper function and safety.

Varnostne informacije

OPOZORILO:

• Always follow the assembly instructions provided in this user manual to ensure safe use.
• Ne prekoračite največje nosilnosti 124.74 kg (275 funtov).
• Be cautious of the swivel feature to prevent tripping.
• Ensure all screws are fully tightened before use. Periodically check and re-tighten all fasteners.

Vsebina paketa

Pred začetkom montaže preverite, ali so vse komponente prisotne:

• Sedežna blazina
• Hrbtna blazina
• Gas Lift (Cylinder)
• Hardware (Screws, Hex Tool)
• Base (5-point star base)
• Nasloni za roke (2)
• Kolesa (5)
• Mechanism (for seat height and tilt)

Postavitev in montaža

Follow these steps to assemble your office chair. An assembly video is provided for visual guidance.

1. Insert Casters: Firmly press each of the five casters (wheels) into the holes at the end of each leg of the 5-point star base. Ensure they are securely seated.
2. Insert Cylinder: Place the gas lift cylinder into the center hole of the assembled base. Ensure the narrower end of the cylinder points upwards.
3. Pritrditev mehanizma na sedež: Align the seat mechanism with the pre-drilled holes on the underside of the seat cushion. Use the provided screws (typically 'A' type) and the hex tool to attach it. Do not fully tighten yet.
4. Place Seat on Cylinder: Carefully place the assembled seat (with mechanism attached) onto the gas lift cylinder. The cylinder should fit snugly into the mechanism's central opening.
5. Pritrdite naslonjala za roke: Position the armrests on either side of the seat, aligning them with the pre-drilled holes on both the seat and the backrest. Use the appropriate screws (typically 'B' type) to attach them. Do not fully tighten these screws at this stage.
6. Pritrdite naslonjalo: Align the backrest with the armrests and the seat. Use the remaining screws (typically 'C' type) to secure the backrest to the armrests.
7. Privijte vse vijake: Once all components are loosely assembled, fully tighten all screws using the hex tool. Ensure all connections are firm and secure.
8. Place Screw Caps: Cover any visible screw heads with the provided plastic caps for a finished appearance.

Navodila za uporabo

Your Amazon Basics office chair offers several adjustable features for personalized comfort:

• Nastavitev višine sedeža: To raise the seat, lift the lever located under the seat while taking your weight off the chair. To lower the seat, lift the lever while remaining seated. Release the lever at the desired height.
• Funkcija nagiba: The chair features a tilt mechanism. To enable tilting, pull the lever outwards. To lock the chair in an upright position, push the lever inwards.
• Nastavitev napetosti nagiba: Rotate the round knob located under the seat (usually at the front of the mechanism) to adjust the tension of the tilt. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).
• 360-stopinjsko vrtenje: The chair is designed with a 360-degree swivel for easy movement and multi-tasking.
• Valjčna kolesa: The five-point base with casters allows for smooth-rolling mobility across various floor surfaces.

Vzdrževanje

To maintain the appearance and longevity of your chair:

• Čiščenje: Obrišite z oglasomamp krpo. Izogibajte se agresivnim kemikalijam ali abrazivnim čistilom, ki lahko poškodujejo umetno usnje.
• Pritrdilni elementi: Periodically check all screws and bolts to ensure they remain tight. Re-tighten as necessary to prevent wobbling or instability.
• Kolesca: Za zagotovitev nemotenega kotaljenja kolesa ne smejo biti ostanki (lasje, prah itd.).

Odpravljanje težav

If you encounter issues with your chair, consider the following:

• Stol se zdi nestabilen ali majav: Ensure all assembly screws are fully tightened. Check the gas lift cylinder for proper seating in the base and mechanism.
• Difficulty leaning back or adjusting tilt: Check the tilt tension knob under the seat. Rotate it counter-clockwise to loosen the tension. Ensure the tilt lock lever is disengaged (pulled outwards).
• Screws not fitting or stripping: Ensure you are using the correct screws for each step as indicated in the assembly instructions. Do not overtighten screws during initial assembly; tighten fully only after all components are loosely fitted. If a screw is stripped, contact customer support for replacement parts.
• Kolesca se ne vrtijo gladko: Inspect casters for trapped debris (hair, lint) and clean them. Ensure they are fully inserted into the base.

Specifikacije

Garancija in podpora

For warranty information or technical support, please refer to the product packaging or contact Amazon Basics customer service directly. Keep your purchase receipt for any warranty claims.