iFlight 43234-1976

iFlight 2.4G Receiver Antenna (150mm, IPEX 4) Instruction Manual

Model: 43234-1976

Uvod

This manual provides essential information for the proper installation, operation, and maintenance of your iFlight 2.4G Receiver Antenna. This antenna is designed for use with compatible FrSky receivers and remote controllers, featuring a 150mm length and an IPEX 4 connector.

Please read these instructions carefully before use to ensure optimal performance and longevity of the product.

Lastnosti izdelka

  • Vrsta priključka: 2.4G receiver antenna with IPEX 4 Generation connector.
  • Dolžina: 5.9 inches (150mm) total length.
  • Material: RF113 Silver plated Wire Material for enhanced signal transmission.
  • Učinkovitost: Precision machining ensures low loss signal stability and high sensitivity.
  • Združljivost: Specifically designed for FrSky XM+, X4R, and X4R-SB receivers, including mini versions.

Vsebina paketa

The package contains 20 pieces of iFlight 150mm 2.4G Receiver Antennas.

A bundle of iFlight 2.4G receiver antennas with IPEX 4 connectors.

Image: A bundle of iFlight 2.4G receiver antennas, showcasing the IPEX 4 connectors and the overall design.

Nastavitev in namestitev

  1. Določite vrsto priključka: Ensure your receiver uses an IPEX 4 port. This antenna is designed for the smaller IPEX 4 connector. Refer to the comparison image below.
  2. Comparison image showing the 'new version IPEX4' connector next to a 'regular version IPEX (bigger port)'.

    Image: A side-by-side comparison of the new IPEX 4 connector (smaller) and a regular IPEX connector (larger port), highlighting the difference.

  3. Povežite se s sprejemnikom: Carefully align the IPEX 4 connector of the antenna with the corresponding port on your FrSky receiver. Apply gentle, even pressure until you feel a distinct "snap," indicating a secure connection.
  4. Namestitev antene: For optimal signal reception, position the antenna away from carbon fiber frames, metal objects, and other electronic components that may cause interference. Ensure the active element (the exposed wire tip) is not obstructed.
  5. Varna antena: Use heat shrink tubing, zip ties, or appropriate mounting solutions to secure the antenna in place, preventing it from moving during flight or operation. Avoid sharp bends or kinks in the antenna wire.
A FrSky receiver with an iFlight 2.4G receiver antenna connected.

Image: A FrSky receiver with an iFlight 2.4G receiver antenna properly connected. Note: The receiver is for reference only and not included with the antenna pack.

Navodila za uporabo

Once the antenna is securely connected and properly positioned, the receiver will utilize it for 2.4G signal reception from your remote controller. No specific operational steps are required for the antenna itself beyond proper installation.

Always perform a range check before operating your RC model to ensure reliable signal strength and control. Consult your receiver's manual for specific binding and range testing procedures.

Vzdrževanje

  • Redni pregled: Periodically inspect the antenna wire and connector for any signs of damage, fraying, or corrosion.
  • Čistoča: Keep the antenna free from dirt, dust, and moisture. Use a soft, dry cloth for cleaning if necessary.
  • Shranjevanje: When not in use, store the antennas in a dry, cool place, protected from physical damage.
  • Zamenjava: If the antenna wire is cut, bent severely, or the connector is damaged, replace it immediately with a new iFlight 2.4G Receiver Antenna to maintain signal integrity.

Odpravljanje težav

Problem: Poor Signal / Frequent Failsafes
  • Preverite povezavo: Ensure the antenna is securely connected to the receiver's IPEX 4 port. A loose connection can severely degrade signal quality.
  • Namestitev antene: Verify that the antenna is positioned optimally, away from obstructions and interference sources. Ensure the active element is exposed.
  • Antenna Damage: Inspect the antenna for any physical damage. Even minor cuts or kinks can affect performance. Replace if damaged.
  • Receiver Issues: If multiple antennas show similar issues, the problem might lie with the receiver itself or the remote controller. Consult their respective manuals.
Problem: Antenna Does Not Fit
  • Preverite vrsto priključka: This antenna uses an IPEX 4 (smaller) connector. If your receiver requires a larger IPEX (U.FL) connector, this antenna will not be compatible. Double-check your receiver's specifications.

Specifikacije

Parameter Vrednost
Številka modela 43234-1976
Vrsta antene 2.4G Receiver Antenna
Vrsta priključka IPEX 4 Generation
Dolžina 150 mm (5.9 palca)
Material žice RF113 Silver plated
Impedanca 50 Ohm
Frekvenčno območje 2400 - 2500 MHz
SWR <= 2.0
Dobiček 2
Delovna temperatura -40 °C do +65 °C
Temperatura shranjevanja -40 °C do +80 °C
Item Weight (per antenna) Approximately 0.5g (as shown in product images)
An iFlight 2.4G receiver antenna laid out next to a ruler, indicating its 150mm length.

Image: The 150mm length of the antenna measured against a ruler.

An iFlight 2.4G receiver antenna coiled on a digital scale, showing a weight of 0.5g.

Image: A single antenna on a digital scale, displaying a weight of 0.5 grams.

Uradni videoposnetek izdelka

Video: This official video demonstrates the 2.4G Receiver Antenna, highlighting its features and compatibility with Futaba and FrSky systems. (Duration: 0:24)

Garancija in podpora

For warranty information and technical support, please refer to the official iFlight webspletno mesto ali se obrnite neposredno na njihovo službo za stranke. Posebni garancijski pogoji se lahko razlikujejo glede na regijo in prodajalca.

© 2026 iFlight. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.