HURI Air Filter, Fuel Line, and Fuel Filter Kit Instruction Manual

1. Uvod

This instruction manual provides essential information for the proper installation, operation, and maintenance of your HURI Air Filter, Fuel Line, and Fuel Filter Kit. This kit is designed as a replacement part for various Bolens and Yard Machines trimmers and cultivators. Adhering to these instructions will help ensure the longevity and optimal performance of your equipment.

2. Varnostne informacije

WARNING: Always wear appropriate personal protective equipment (PPE) such as safety glasses and gloves when working with power tools and their components. Ensure the engine is off and cool before performing any maintenance or installation. Disconnect the spark plug wire to prevent accidental starting.

• Read and understand all instructions before installation or maintenance.
• Otroci in navzoči ljudje naj ne bodo v bližini delovnega območja.
• Handle fuel with extreme care. Store in approved containers and in a well-ventilated area.
• Dispose of old parts and fuel responsibly according to local regulations.

3. Vsebina paketa

Preverite, ali so v vašem paketu priloženi vsi spodaj navedeni elementi:

• 2 x Fuel Filters
• 2 x Primer Bulbs
• 2 x 1-foot Fuel Lines
• 2 x zračna filtra
• 1 x Vžigalna svečka

Image 1: Components of the HURI Air Filter, Fuel Line, and Fuel Filter Kit. This image displays the various parts included in the kit, such as air filters, fuel filters, fuel lines, primer bulbs, and a spark plug, laid out for inspection.

4. Združljivost

This kit is compatible with the following models:

Bolens Models:

• BL100 (41BD100G765, 41AD100G065, 41AD100G965, 41BD100G965, 41CD100G163, 41CD100G765)
• BL150 (41BD150G163, 41BD150G765, 41AD150G065, 41AD150G965, 41BD150G965, 41CD150G163, 41CD150G765)
• BL250 (41AD25G-065, 41BD250G163, 41CD250G163)
• BL410 (21A-121R965, 21B-121R765, 21BK410G163)

Yard Man / Yard Machines Models:

• 21A-121R129, 31C-116-000
• 120R (21C-120R000)
• 121R (21A-121R700, 21A-121R900)
• 2800m (41AD280G000, 41AD280G900, 41BD280G900, 41BD280G000)
• Y28 (41ADY28G000, 41ADY28G900, 41BDY28G000)
• Y725 (41AD725C900)
• YM1000 (41ADY10G401, 41BDY10G401)
• YM1500 (41ADY15G701, 41CDY15G901, 41ADY15G401)
• YM320BV (41AS320G701, 41BS320G901, 41CS320G901)
• YM400 (41BDY40G701, 41BDY40G901, 41ADY40G401)
• YM70SS (41BDY70C901, 41CDY70C901)

5. Namestitev

Follow these general steps for replacing components. Specific procedures may vary slightly depending on your equipment model. Refer to your equipment's original manual for detailed disassembly and reassembly instructions.

5.1. Replacing the Air Filter

1. Locate the air filter cover on your engine.
2. Unclip or unscrew the cover and remove it.
3. Previdno odstranite stari zračni filter. Bodite pozorni na njegovo orientacijo.
4. Očistite morebitne umazanije iz ohišja zračnega filtra.
5. Install the new air filter, ensuring it fits snugly and in the correct orientation.
6. Zamenjajte pokrov zračnega filtra in ga pritrdite.

5.2. Replacing Fuel Filters and Fuel Lines

1. Preostalo gorivo iz rezervoarja za gorivo izpustite v odobreno posodo.
2. Locate the fuel lines and fuel filter inside the fuel tank.
3. Carefully pull the old fuel lines and filter assembly out of the tank opening.
4. Disconnect the old fuel filter from the fuel line.
5. Attach a new fuel filter to one end of a new fuel line.
6. Feed the new fuel line and filter assembly into the fuel tank, ensuring the filter rests at the bottom of the tank.
7. Connect the other end of the fuel line to the carburetor or primer bulb as appropriate for your model.
8. Repeat for any additional fuel lines or primer bulbs.

5.3. Replacing the Spark Plug

1. Locate the spark plug on the engine cylinder head.
2. Carefully pull off the spark plug boot.
3. Use a spark plug wrench to loosen and remove the old spark plug.
4. Inspect the new spark plug for any damage.
5. Thread the new spark plug into the cylinder head by hand to prevent cross-threading.
6. Tighten the spark plug with the wrench, being careful not to overtighten.
7. Reattach the spark plug boot firmly.

6. Delovanje

After installing the new components, ensure all connections are secure and there are no fuel leaks. Fill the fuel tank with the appropriate fuel mixture (if applicable for 2-stroke engines) as specified by your equipment manufacturer. Prime the engine using the primer bulb until fuel is visible in the bulb, then start the engine according to your equipment's operating instructions.

7. Vzdrževanje

Regular maintenance of these components is crucial for optimal performance and engine longevity.

• Zračni filter: Inspect the air filter regularly (e.g., every 10-20 hours of operation or seasonally). Clean or replace it if it appears dirty or clogged. A dirty air filter can restrict airflow, leading to poor engine performance and increased fuel consumption.
• Filter goriva: Replace the fuel filter annually or if you notice a decrease in engine power or erratic operation, which could indicate a clogged filter.
• Vžigalna svečka: Inspect the spark plug annually or every 25-50 hours of operation. Replace it if the electrodes are worn, fouled, or if the engine experiences starting difficulties or misfires.
• Gorivne cevi: Periodically check fuel lines for cracks, hardening, or leaks. Replace them immediately if any damage is observed to prevent fuel leaks and potential fire hazards.

8. Odpravljanje težav

Če po namestitvi kompleta naletite na težave, upoštevajte naslednje pogoste korake za odpravljanje težav:

9. Specifikacije

• Znamka: HURI
• Izdelek razred: Nadomestni del
• Zunanji material: Plastika
• Vrsta servisa vozila: Lawn Mower, Trimmer, Cultivator
• Teža artikla: Approximately 4 ounces (total kit)
• Številka dela proizvajalca: HSGD01048

10. Garancija in podpora

No specific warranty information is provided with this product. For support or inquiries regarding this HURI replacement kit, please contact your retailer or the manufacturer directly.