1. Uvod
This manual provides essential instructions for the installation, operation, maintenance, and troubleshooting of your APC Smart-UPS SRT 3000VA RM 230V (SRT3000RMXLI). This Uninterruptible Power Supply (UPS) is designed to provide high-density, true double-conversion online power protection for critical electronic equipment, including servers, voice/data networks, medical labs, and light industrial applications. Please read this manual thoroughly before installing or operating the UPS to ensure proper and safe usage.
2. Varnostne informacije
Observe all warnings and operating instructions in this manual. Failure to do so may result in injury or equipment damage. This UPS contains hazardous voltages. Do not attempt to disassemble the unit. There are no user-serviceable parts inside.
Splošna varnost
- Ta UPS je namenjen samo za uporabo v zaprtih prostorih.
- Tega UPS-a ne uporabljajte na neposredni sončni svetlobi, v stiku s tekočinami ali kjer je preveč prahu ali vlage.
- Ensure the ventilation openings on the UPS are not blocked. Maintain adequate clearance around the unit for proper airflow.
- Connect the UPS power cable directly to a grounded wall outlet. Do not use extension cords or surge suppressors.
Varnost baterije
- Batteries are heavy. Remove the battery module before installing the UPS in a rack or tower configuration.
- Battery service should be performed or supervised by personnel knowledgeable of batteries and the required precautions.
- Baterij ne mečite v ogenj. Baterije lahko eksplodirajo.
- Ne odpirajte ali pokvarite baterij. Izpuščeni elektrolit je škodljiv za kožo in oči. Lahko je strupeno.
- Replace batteries with the same type and number of batteries as originally installed.
3. Vsebina paketa
Carefully unpack the unit and inspect for shipping damage. If any damage is found, notify the carrier and dealer. The package should contain the following items:
- APC Smart-UPS SRT 3000VA RM 230V (SRT3000RMXLI) unit
- Battery module (may be pre-installed or separate)
- Rack-mounting hardware (rails, brackets)
- Tower stand (for tower configuration)
- USB komunikacijski kabel
- Serijski komunikacijski kabel
- CD z dokumentacijo
- Safety information and warranty guide
4. Izdelek je končanview
The APC Smart-UPS SRT 3000VA RM 230V is a high-performance Uninterruptible Power Supply designed to protect your critical equipment from power disturbances. It features a rack/tower convertible form factor for flexible deployment.
Slika 1: Spredaj view of the APC Smart-UPS SRT 3000VA RM 230V. This image displays the front panel with the LCD display, control buttons, and ventilation grilles.
Ključne komponente
- Front Panel LCD Display: Provides real-time status information, configuration options, and alarm notifications.
- Gumbi za upravljanje: Used to navigate the LCD menu, power on/off the UPS, and perform self-tests.
- Baterijski modul: Zagotavlja rezervno napajanje med izpadomtages. Hot-swappable for easy replacement.
- Vhodni priključek za napajanje: Connects the UPS to the utility power source.
- Output Receptacles (IEC 320): Provide protected power to connected equipment.
- Communication Ports (USB, Serial): For connecting to a computer or network management card for monitoring and control.
- Vrata EPO (izklop v sili): Allows for remote emergency shutdown of the UPS.
5. Nastavitev
Follow these steps for initial setup of your UPS.
Korak 1: Izberite lokacijo
- Place the UPS on a sturdy, level surface or install it in a standard 19-inch rack.
- Prepričajte se, da je temperatura okolice med 0 °C in 40 °C (32 °F in 104 °F).
- Maintain at least 10 cm (4 inches) of clearance at the front and rear of the unit for proper ventilation.
Step 2: Install the Battery Module
If the battery module is not pre-installed, slide it into the battery bay until it clicks into place. Connect the battery cables as indicated by the labels.
Step 3: Connect to Utility Power
- Connect the UPS input power cord to a grounded 230V AC outlet.
- The UPS will perform a self-test and the LCD display will illuminate.
4. korak: Priključite opremo
- Connect your critical equipment (servers, network devices, etc.) to the output receptacles on the rear of the UPS.
- Ensure the total load does not exceed the UPS capacity (3000VA / 2700W).
Step 5: Connect Communication Cables (Optional)
- Za spremljanje in možnost pravilnega izklopa priključite kabel USB ali serijski kabel iz UPS-a na računalnik ali strežnik.
- Install the PowerChute software (available from APC website) on your computer for advanced management.
6. Upravljanje UPS-a
Vklop UPS-a
Press and hold the power button on the front panel until you hear a beep. The UPS will start up and provide power to connected equipment.
Izklop UPS-a
Press and hold the power button until the UPS shuts down. Ensure all connected equipment is safely shut down before powering off the UPS.
LCD Display and Navigation
The LCD display provides detailed information about the UPS status, battery charge, load level, and various settings. Use the navigation buttons (up, down, enter, escape) to browse through the menus and adjust settings.
Samotestiranje
Regularly perform a self-test to ensure the UPS battery and internal components are functioning correctly. This can typically be initiated via the LCD menu or PowerChute software.
7. Vzdrževanje
Zamenjava baterije
The UPS batteries have a typical lifespan of 3-5 years. The UPS will indicate when the batteries need replacement. Refer to the safety information before attempting battery replacement. Use only APC-approved replacement battery modules (APCRBC152).
Čiščenje
Clean the exterior of the UPS with a soft, damp cloth. Do not use solvents or abrasive cleaners. Ensure ventilation openings are free from dust and debris.
Okoljski vidiki
Store the UPS in a cool, dry place when not in use. Avoid extreme temperatures and humidity, which can shorten battery life.
8. Odpravljanje težav
This section provides solutions to common issues you may encounter with your UPS.
| Težava | Možen vzrok | rešitev |
|---|---|---|
| UPS se ne vklopi | No utility power; Battery not connected; UPS fault | Check power outlet; Ensure battery cables are connected; Contact APC support if fault persists. |
| UPS neprekinjeno piska | Napajanje iz baterije; Preobremenitev; Prazna baterija | Check utility power; Reduce connected load; Allow battery to recharge. |
| Baterija se ne polni | Battery disconnected; Battery fault; Internal fault | Verify battery connection; Replace battery if faulty; Contact APC support. |
| Priključena oprema izgubi moč | UPS overload; Battery depleted; UPS fault | Reduce load; Allow battery to recharge; Contact APC support. |
9. Specifikacije
Detailed technical specifications for the APC Smart-UPS SRT 3000VA RM 230V (SRT3000RMXLI).
| Funkcija | Podrobnost |
|---|---|
| Številka modela | SRT3000RMXLI |
| Znamka | APC |
| Zmogljivost | 3000 VA / 2700 vatov |
| Vhodna voltage | 230 volta |
| Izhodna voltage | 230 volta |
| Faktor oblike | Rack/Tower Convertible (2U) |
| Vrsta baterije | Svinčena kislina |
| Tipični čas delovanja (polna obremenitev) | Približno 4 minut |
| Število prodajnih mest | 8 x IEC 320 C13, 2 x IEC 320 C19 |
| Komunikacijska vrata | USB, Serial (RJ45), SmartSlot |
| Dimenzije (V x Š x G) | 8.5 cm x 43.2 cm x 63.5 cm (3.35 x 17.0 x 25.0 palcev) |
| Teža | 31.3 kg (69 lbs) |
| barva | Črna |
10. Garancija in podpora
Informacije o garanciji
APC provides a standard warranty for this product. Please refer to the warranty card included in your package or visit the official APC webZa podrobne garancijske pogoje, specifične za vašo regijo, obiščite spletno mesto. Shranite dokazilo o nakupu za uveljavljanje garancije.
Tehnična podpora
For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact APC customer support. Support contact information can typically be found on the APC website or in the documentation provided with your unit. When contacting support, please have your model number (SRT3000RMXLI) and serial number ready.