LightInTheBox Modern LED Pendant Light 3-Ring Chandelier Instruction Manual

Uvod

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your LightInTheBox Modern LED Pendant Light 3-Ring Chandelier. Please read this manual thoroughly before installation and retain it for future reference.

Varnostne informacije

OPOZORILO: Da bi zmanjšali tveganje električnega udara, požara ali poškodb oseb, natančno preberite in upoštevajte vsa navodila.

• Pred namestitvijo ali vzdrževanjem vedno izklopite napajanje na glavnem odklopniku.
• Installation must be performed by a qualified electrician or a person familiar with the construction and operation of the product and the hazards involved.
• Prepričajte se, da površina za montažo lahko prenese težo naprave.
• Naprave ne priključujte na neozemljen električni sistem.
• Ne poskušajte spreminjati napeljave.
• Vnetljive materiale hranite stran od svetilke.

Vsebina paketa

Pred začetkom namestitve preverite, ali so vse komponente prisotne in nepoškodovane.

• LED Pendant Light Fixture (3 Rings)
• Stropna nadstrešnica
• Pritrdilni material (vijaki, matice, nosilec)
• Daljinski upravljalnik (baterije niso priložene)
• Navodila za uporabo

Specifikacije

Nastavitev in namestitev

Za pravilno namestitev sledite tem korakom. Priporočljivo je, da namestitev izvedeta dve osebi.

1. Pripravite se na namestitev

• Izklopite napajanje: Ensure the power supply to the installation area is completely off at the circuit breaker.
• Razpakiraj: Previdno vzemite vse komponente iz embalaže. Preverite, ali so poškodovane.
• Prepoznajte komponente: Familiarize yourself with the fixture, ceiling canopy, mounting bracket, and wires.

2. Namestite vpenjalo

1. Attach the mounting bracket to your ceiling junction box using the provided screws. Ensure the junction box can support the fixture's weight (approximately 6.6 lbs / 3 kg).
2. Povežite električne žice:
   • Povežite črna žico od svetilke do rjava (hot) wire from the ceiling.
   • Povežite bela žico od svetilke do modra (neutral) wire from the ceiling.
   • Povežite baker (ozemljitvena) žica od svetilke do zelena (ground) wire from the ceiling.
   • Secure connections with wire nuts.
3. Previdno vstavite žice v razvodno omarico.
4. Attach the ceiling canopy to the mounting bracket, securing it with the provided screws.

Figure 1: Assembled 3-Ring Chandelier

3. Adjusting Ring Height and Orientation

The three rings of the chandelier are suspended by adjustable cords, allowing for customization of their height and angle. This adjustment should ideally be done before the final mounting of the canopy to the ceiling.

1. To adjust the length of each suspension wire, locate the small circular lip or button on the inside of the ceiling canopy where each wire is connected.
2. Pritisnite in držite this button while simultaneously pushing or pulling the wire to your desired length. Release the button to lock the wire in place.
3. Adjust each ring individually to achieve your preferred aesthetic. The rings can be positioned to overlap or spread out.
4. Excess wire can be coiled and secured within the ceiling canopy.

Figure 2: Adjustable Cord Mechanism and Ring Dimensions

Figure 3: Detail of Suspension Wire Adjustment Point

Navodila za uporabo

Your LightInTheBox LED Pendant Light is controlled via the included remote control.

Funkcije daljinskega upravljanja

• Vklop/izklop: Pritisnite gumb za vklop, da vklopite ali izklopite luč.
• Prilagoditev svetlosti: Use the brightness buttons (usually marked with '+' and '-') to increase or decrease the light intensity.
• Prilagoditev barvne temperature: If your model supports it, use the dedicated buttons to switch between different color temperatures (e.g., warm white, cool white). This model provides Warm White (3000K).
• Funkcija pomnilnika: When turned off using the remote control, the fixture will typically remember the last brightness and color temperature settings. If turned off via a wall switch, it may default to maximum power with alternating warm or cool white settings.
• Funkcija časovnika: Some remotes may include a timer function. Refer to the remote's specific markings for details.

Figure 4: Remote Control for Chandelier Functions

Opomba: Daljinski upravljalnik potrebuje 2 AAA bateriji (nista priloženi).

Vzdrževanje

• Čiščenje: Pred čiščenjem se prepričajte, da je napajanje izklopljeno. Obrišite napravo z mehko, suho ali rahlo vlažno krpo.amp krpo. Ne uporabljajte abrazivnih čistil ali topil.
• Življenjska doba LED: Vgrajeni LED vir svetlobe je zasnovan za dolgotrajno uporabo in ga uporabnik ne more zamenjati.

Odpravljanje težav

Garancija in podpora

For warranty information or technical support, please contact LightInTheBox customer service. Retain your purchase receipt for warranty claims.

Za dodatno pomoč obiščite LightInTheBox Store on Amazon.