Universal Office Chair Assembly Manual

1. Pomembne varnostne informacije

Pred sestavljanjem in uporabo natančno preberite vsa navodila. Ta priročnik shranite za poznejšo uporabo.

• Pred začetkom sestavljanja se prepričajte, da so vsi deli prisotni in nepoškodovani. Ne uporabljajte, če kateri koli deli manjkajo ali so poškodovani.
• Assemble the chair on a soft, clean surface to prevent scratching.
• Med sestavljanjem ne privijte vijakov preveč, saj lahko s tem poškodujete komponente.
• Otroke in hišne ljubljenčke držite stran od območja montaže. Majhni deli lahko predstavljajo nevarnost zadušitve.
• Only use the chair for its intended purpose.
• Ne stojte na stolu.

2. Vsebina paketa

Verify that all components listed below are included in your package.

3. Navodila za montažo

Follow these steps carefully to assemble your office chair.

1. Pritrdite kolesca na zvezdasto podnožje: Insert each caster (F) into the holes at the end of each leg of the star base (E). Push firmly until they click into place.
2. Vstavite plinsko dvigalo: Place the gas lift cylinder (D) into the center hole of the assembled star base (E). Ensure it sits securely.
3. Pritrdite ploščo mehanizma na sedež: Align the mechanism plate (G) with the pre-drilled holes on the underside of the seat cushion (B). Ensure the front of the mechanism plate faces the front of the seat. Secure with four M8x25mm screws (I) using the Allen wrench (J).
4. Pritrditev naslonov za roke na sedež: Attach the armrests (C) to the underside of the seat cushion (B) using four M6x20mm screws (H), two per armrest. Do not fully tighten yet.
5. Attach Chair Back to Armrests: Align the chair back (A) with the remaining holes on the armrests (C). Secure with the remaining four M6x20mm screws (H), two per armrest. Now, fully tighten all armrest screws.
6. Priključite sklop sedeža na plinsko dvigalo: Carefully place the assembled seat and back onto the gas lift cylinder (D) protruding from the star base. Press down firmly to secure.

Your office chair is now assembled.

4. Navodila za uporabo

Familiarize yourself with the chair's adjustment features for optimal comfort.

• Nastavitev višine: To raise the seat, lift the lever located under the right side of the seat while taking your weight off the chair. To lower the seat, lift the lever while seated. Release the lever at the desired height.
• Zaklepanje/odklepanje nagiba: Pull the same lever outwards to unlock the tilt function, allowing the chair back to recline. Push the lever inwards to lock the chair back in an upright position.
• Napetost nagiba: Rotate the round knob located under the front-center of the seat to adjust the tension of the tilt mechanism. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).
• Armrest Adjustment (if applicable): Some models feature adjustable armrests. Look for buttons or levers on the armrests to adjust their height or pivot.

5. Vzdrževanje

Regular maintenance will prolong the life of your office chair.

• Čiščenje: Površine obrišite z mehko, damp cloth. For fabric upholstery, use a mild fabric cleaner. Avoid harsh chemicals or abrasive cleaners.
• Preverjanje pritrdilnih elementov: Občasno preverite vse vijake in matico, da se prepričate, da so trdno priviti. Po potrebi jih ponovno privijte.
• Caster Cleaning: Odstranite morebitne lase ali umazanijo, ki se lahko naberejo okoli kolesc, da zagotovite nemoteno gibanje.
• Mazanje: The gas lift cylinder is maintenance-free. Do not attempt to lubricate it.

6. Odpravljanje težav

Za rešitve pogostih težav glejte ta razdelek.

7. Specifikacije

Key technical details of your office chair.