Protmex MS6208A Contact Digital Tachometer

1. Uvod

The Protmex MS6208A is a compact, portable handheld digital tachometer designed for precise contact measurement of rotational and linear speeds. It is equipped with a high-speed integrated chip for stable and reliable performance. This device is ideal for a wide range of applications, including measuring the speed of motors, fans, conveyor belts, and various industrial and automotive equipment.

This manual provides detailed instructions on the proper setup, operation, maintenance, and troubleshooting of your MS6208A tachometer to ensure accurate measurements and extend the product's lifespan.

2. Varnostne informacije

Pred uporabo naprave preberite in razumite vsa varnostna navodila. Neupoštevanje teh navodil lahko povzroči telesne poškodbe ali škodo na instrumentu.

• Always wear appropriate personal protective equipment (PPE) when taking measurements, especially when working with moving machinery.
• Do not attempt to measure rotating objects that are unstable or could pose a hazard.
• Ensure the device is clean and dry before use. Do not operate in wet or explosive environments.
• Napravo hranite stran od močnih elektromagnetnih polj.
• Do not disassemble or modify the instrument. Refer all servicing to qualified personnel.
• Ko se prikaže indikator nizke temperature baterije, takoj zamenjajte baterije, da zagotovite natančne odčitke.

3. Vsebina paketa

Ob razpakiranju preverite, ali so vsi predmeti prisotni in v dobrem stanju.

• 1 x Protmex MS6208A Digital Tachometer
• 1 x 6-inch Idler Wheel
• 1 x 0.1m Idler Wheel
• 2 x Touch Tips (Protruding and Concave)
• 1 x podaljšek
• 4 x 1.5 V AAA baterije
• 1 x Uporabniški priročnik (ta dokument)
• 1 x Meter Bag

4. Izdelek je končanview

The MS6208A tachometer is designed for versatility and ease of use, featuring a robust build and intuitive controls.

Figure 4.1: Labeled diagram of the Protmex MS6208A Digital Tachometer, showing the LCD screen, transmission shaft, power button, mode switch, data storage (MEM), data storage read (READ), and plus/minus buttons.

Ključne značilnosti:

• Highly Reliable Digital Tachometer: Features a 16-bit high-speed integrated chip for stable and reliable performance. The double-layer ABS casing, produced by secondary injection molding, offers an ergonomic design for easy operation and maintenance.
• Merjenje kontakta: Measures rotational speeds from 50 RPM to 19999 RPM and surface speeds. Includes 5 different contact accessories (idler wheels, touch tips) to suit various measurement needs.
• Več funkcij: Offers 5 unit selections (m/min, m/sec, ft/min, ft/sec, in/min). Features include 100 groups of data recording, data hold, and average value functions.
• LCD osvetlitev ozadja: Equipped with an LCD backlight display for easy data reading in dark environments.
• Varčevanje z energijo: Includes a low battery indicator and automatically powers off after 30 seconds of inactivity to conserve energy.

Figure 4.2: The Protmex MS6208A tachometer shown with different contact attachments, illustrating its capability to measure rotation speeds from 50 RPM to 19999 RPM.

5. Nastavitev

5.1 Namestitev baterije

1. Poiščite predal za baterije na zadnji strani tahometra.
2. Open the battery cover by sliding it off or unscrewing it, depending on the model.
3. Insert four (4) 1.5V AAA batteries, ensuring correct polarity (+ and -).
4. Varno zaprite predal za baterije.

Slika 5.1: View of the Protmex MS6208A's battery compartment, showing the placement for four AAA batteries and the internal 16-bit low-power MCU chip.

5.2 Attaching Measurement Accessories

The tachometer comes with various accessories for different measurement scenarios.

1. Select the appropriate contact accessory (idler wheel or touch tip) for your measurement task.
2. Attach the chosen accessory firmly to the transmission shaft at the top of the tachometer. For extended reach, use the extension bar between the shaft and the accessory.

Figure 5.2: The Protmex MS6208A tachometer demonstrating its adaptability with a 0.1m/6in. idler wheel, protruding touch tip, and concave touch tip, along with an extension bar.

6. Navodila za uporabo

6.1 Vklop/izklop

• Pritisnite Moč gumb () za vklop naprave.
• The device will automatically power off after 30 seconds of inactivity. To manually turn off, press and hold the Moč gumb.

6.2 Načini merjenja in izbira enote

• After powering on, the device defaults to RPM measurement.
• Pritisnite NAČIN button to cycle through different measurement units: RPM, m/min, m/sec, ft/min, ft/sec, in/min.
• Ensure the selected unit matches your measurement requirement.

6.3 Merjenje

1. Attach the appropriate contact accessory to the tachometer.
2. Gently press the contact accessory against the center of the rotating object or surface you wish to measure.
3. Ensure stable contact. The LCD will display the real-time measurement.
4. For surface speed measurements, use an idler wheel and press it against the moving surface.

6.4 Data Hold, MAX/MIN/AVG Functions

• Pritisnite MERI button to hold the current reading on the display. Press again to release.
• Pritisnite MIN / MAX button to cycle through Maximum, Minimum, and Average readings during a measurement session.

6.5 Data Storage (MEM) and Recall (READ)

The device can store up to 100 groups of data.

Figure 6.1: The Protmex MS6208A tachometer in use, demonstrating its ability to store up to 100 sets of measurement data.

• To store a reading, press the MEM button while a measurement is displayed. The display will show the storage location number.
• To recall stored data, press the PREBERI gumb. Uporabite Plus (+) in minus (-) buttons to navigate through the stored data groups.

6.6 Osvetlitev ozadja

• Pritisnite Osvetlitev ozadja gumb () to turn the LCD backlight on or off for improved visibility in low-light conditions.

Slika 6.2: Bližnji posnetek view of the Protmex MS6208A's backlit LCD display, showing clear readability of contact RPM measurements.

7. Vzdrževanje

7.1 Čiščenje

• Wipe the device with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth with mild detergent, then dry thoroughly.
• Ne uporabljajte abrazivnih čistil ali topil, saj lahko poškodujejo casing ali zaslon.
• Keep the transmission shaft and contact accessories free from dust and debris to ensure smooth operation and accurate readings.

7.2 Shranjevanje

• When not in use for an extended period, remove the batteries to prevent leakage and damage to the device.
• Store the tachometer and its accessories in the provided meter bag in a cool, dry place, away from direct sunlight and extreme temperatures.

7.3 Zamenjava baterije

• When the low battery indicator appears on the display, replace all four AAA batteries promptly.
• Sledite korakom za namestitev baterije, opisanim v poglavju 5.1.

8. Odpravljanje težav

If you encounter issues with your Protmex MS6208A, refer to the following common problems and solutions:

9. Specifikacije

10. Garancija in podpora

Protmex is committed to providing quality products and customer satisfaction. This product is CE (LVE, EMC, RoHS) certified.

For any questions, technical assistance, or support needs, please contact Protmex customer service. We provide friendly 24/7 online support to assist you with any inquiries regarding your MS6208A Digital Tachometer.

Please refer to your purchase documentation or the official Protmex webZa posebne garancijske pogoje in kontaktne podatke obiščite spletno mesto.