Godox X2T-S TTL Wireless Flash Trigger Transmitter for Sony Cameras User Manual

Uvod

The Godox X2T-S is a TTL wireless flash trigger transmitter designed for Sony cameras, featuring 2.4G wireless transmission and Bluetooth connectivity. It supports a range of advanced flash functions including TTL autoflash, 1/8000s high-speed sync, multiflash mode, and manual mode. This manual provides detailed instructions for setting up, operating, and maintaining your X2T-S transmitter.

Figure 1: Godox X2T-S Wireless Flash Trigger Transmitter, showing the top and front controls.

Nastavitev

1. Installing on Camera

1. Ensure your camera and the X2T-S transmitter are powered off.
2. Slide the X2T-S hotshoe onto your camera's hotshoe mount.
3. Secure the transmitter by rotating the hotshoe locking mechanism until it is firmly attached.
4. Power on the X2T-S transmitter and your camera.

Figure 2: The X2T-S transmitter mounted securely on a Sony camera's hotshoe.

2. Vklop/izklop

Locate the power switch on the side of the unit. Slide it to the "ON" position to power on the transmitter. Slide it to "OFF" to power off.

Slika 3: stran view of the X2T-S, highlighting the power switch and other controls.

3. Bluetooth Connection (GodoxPhoto App)

1. Download the "GodoxPhoto" app from your mobile device's app store (compatible with iPhone/Android phones or iPad/Android tablets).
2. Omogočite Bluetooth na mobilni napravi.
3. On the X2T-S, press and hold the MENI button to enter the menu, then navigate to the Bluetooth settings and ensure it is enabled.
4. Open the GodoxPhoto app and follow the on-screen instructions to connect to your X2T-S transmitter.
5. Once connected, you can control flash mode, power output, modeling light mode, and other settings directly from the app.

Navodila za uporabo

1 Osnovni gumbi in prikaz

The X2T-S features an LCD screen for clear display of settings, along with 5 group setting buttons (A, B, C, D, E) and 3 function buttons (MODE, MENU, SET, ALL) for quick adjustments. The control wheel allows for easy value changes.

Slika 4: Bližnji posnetek view of the X2T-S LCD display and control buttons.

2. Wireless X System (2.4G)

The built-in Godox 2.4G Wireless X System provides a reliable operating distance of up to 100 meters. To avoid signal interference, ensure the channels and wireless IDs of the master (X2T-S) and slave units (Godox flashes) are set to the same values.

• skupine: The X2T-S supports 5 groups (A, B, C, D, E) for controlling multiple flash units independently.
• Kanali: 32 channels are available to prevent interference.
• Brezžična identifikacija: Access to 99 wireless ID settings further limits interference from other systems.

3. Flash Modes and Functions

• Samodejna bliskavica TTL: Samodejno prilagodi moč bliskavice za pravilno osvetlitev.
• Ročni način: Omogoča natančen nadzor nad močjo bliskavice.
• Multi-flash Mode: Sproži serijo hitrih bliskov za ustvarjalne učinke.
• Visokohitrostna sinhronizacija (HSS): Omogoča sinhronizacijo bliskavice pri časih zaklopa do 1/8000 s.
• Kompenzacija osvetlitve bliskavice (FEC): Adjusts flash output relative to the camera's metered exposure.
• Funkcija TCM: Converts TTL flash values into manual power output values, allowing for quick transitions between automatic and manual control.
• Modeliranje L.amp Nadzor: Prilagodite modeliranje lamp settings of compatible Godox flashes.
• AF Assist Light: The X2T-S features an AF assist light that uses visible light to aid camera autofocus in low-light conditions.

Vzdrževanje

• Naprave hranite suho. Ne prijemajte je z mokrimi rokami in je ne potapljajte v vodo.
• Avoid sudden temperature changes, as this can cause condensation.
• Clean the device with a soft, dry cloth. Do not use harsh chemicals or solvents.
• Store the device in a cool, dry place away from direct sunlight and excessive heat.
• Protect the hotshoe contacts from dust and damage.
• The X2T-S uses a USB-C connection for firmware updates, which is more reliable than MicroUSB. Keep the port clean.

Odpravljanje težav

• Flash not triggering:
  • Ensure both the X2T-S and the flash unit(s) are powered on.
  • Verify that the channels and wireless IDs on the transmitter and receiver (flash unit) are identical.
  • Preverite stanje baterije na obeh napravah.
  • Ensure the flash unit is within the operating range (up to 100 meters).
  • Confirm the X2T-S is securely mounted on the camera's hotshoe.
  • If using multiple flashes, ensure they are assigned to the correct groups and enabled.
• Težave s povezavo Bluetooth:
  • Make sure Bluetooth is enabled on both the X2T-S and your mobile device.
  • Restart both the X2T-S and your mobile device.
  • Ensure the GodoxPhoto app is up to date.
  • Try unpairing and re-pairing the device in your mobile device's Bluetooth settings.
• Nedosledna moč bliskavice:
  • Check for any obstructions between the transmitter and receiver.
  • Ensure the flash mode (TTL/Manual) is set correctly for your shooting scenario.
  • Verify that flash exposure compensation is not set to an unintended value.

Specifikacije

Garancija in podpora

For information regarding warranty coverage, technical support, or service, please refer to the documentation provided with your purchase or contact your retailer. You may also visit the official Godox webspletno mesto za najnovejše vire podpore in kontaktne podatke.