Navodila za uporabo stola na kolesih Amazon Basics GF-50201M

Uvod

This manual provides detailed instructions for the assembly, operation, and maintenance of your Amazon Basics GF-50201M Rolling Desk Chair. Please read all instructions carefully before assembly and use to ensure proper function and safety.

Varnostne informacije

Pomembno: Adhere to all safety guidelines to prevent injury or damage.

• Ne prekoračite največje nosilnosti 124.74 kg (275 funtov).
• Ensure proper assembly of all components before use.
• Use the chair on a hard, level floor surface for optimal stability and mobility.
• Regularly inspect all parts for wear or damage. Discontinue use if any damage is found.
• Majhne dele med sestavljanjem hranite izven dosega otrok.

Vsebina paketa

Pred začetkom montaže preverite, ali so vse komponente prisotne:

• Hrbtna blazina
• Sedežna blazina
• Sedežna plošča
• Plinsko dvigalo
• Osnova
• Kolesca (5 kosov)
• Montažni material (vijaki, podložke, imbus ključ)

Postavitev in montaža

Follow these steps for quick and easy assembly. An Allen wrench is included for all necessary fastenings.

1. korak: Pritrdite kolesca na podstavek

Vstavite vseh pet kolesc v luknje na koncu vsake noge podnožja stola. Močno pritisnite, da se zaskočijo.

Image: The five-star base with casters inserted.

2. korak: Vstavite plinsko dvigalo v podstavek

Place the gas lift cylinder into the center hole of the assembled chair base. Ensure it sits securely.

Step 3: Attach Seat Plate to Seat Cushion

Align the seat plate with the pre-drilled holes on the underside of the seat cushion. Use the provided screws and Allen wrench to securely fasten the plate. Ensure the adjustment lever faces the front of the seat.

Image: Close-up of the seat adjustment lever mechanism.

Step 4: Attach Back Cushion to Seat Assembly

Connect the back cushion support to the seat plate using the remaining screws and Allen wrench. Tighten all screws firmly but do not overtighten.

Slika: Zadaj view of the chair showing the mesh back and connection points.

Step 5: Place Assembled Seat onto Gas Lift

Carefully place the assembled seat (with the seat plate attached) onto the top of the gas lift cylinder. The seat will settle into place once weight is applied.

Video o montaži

Video: Official Amazon Basics assembly guide for the Low-Back Computer Chair. This video demonstrates the step-by-step process of putting the chair together, from attaching the casters to securing the seat and backrest.

Navodila za uporabo

Nastavitev višine sedeža

To adjust the seat height, locate the lever on the right side beneath the seat. While seated, pull the lever upwards to lower the seat. To raise the seat, lift your weight off the seat and pull the lever upwards. Release the lever at your desired height.

Image: A hand demonstrating the use of the pneumatic seat height adjustment lever.

Vrtenje in mobilnost

The chair features a 360-degree swivel function, allowing for easy rotation. The smooth-rolling casters provide effortless movement across hard floor surfaces.

Image: A person comfortably seated in the Amazon Basics desk chair, illustrating its use in an office setting.

Vzdrževanje

To maintain the appearance and functionality of your chair:

• Čiščenje: Obrišite z oglasomamp krpo. Izogibajte se agresivnim kemikalijam ali abrazivnim čistilom.
• Pregled: Občasno preverite vse vijake in povezave, da se prepričate, da so trdno priviti. Po potrebi jih ponovno privijte.
• Kolesca: Za zagotovitev nemotenega kotaljenja poskrbite, da so kolesca čista od umazanije.

Odpravljanje težav

Specifikacije

Image: Diagram illustrating the dimensions of the Amazon Basics Rolling Desk Chair.

Garancija in podpora

For warranty information or customer support, please refer to the Amazon Basics official webspletno mesto ali se obrnite neposredno na službo za stranke Amazon. Za morebitne garancijske zahtevke shranite račun.